Animal NDC 29983-0111-6 Pro-san Lv Plus Activator

Animal Product Information

Field Name Field Value
Animal NDC Code 29983-0111-6
Proprietary Name Pro-san Lv Plus Activator What is the Proprietary Name?
The proprietary name also known as the trade name is the name of the product chosen by the medication labeler for marketing purposes.
Non-Proprietary Name Pro-san Lv Plus Activator What is the Non-Proprietary Name?
The non-proprietary name is sometimes called the generic name. The generic name usually includes the active ingredient(s) of the product.
Labeler Name Iba
Product Type Otc Animal Drug
Usage Information
    GENERAL RECOMMENDATIONSTo make a ready-to-use solution of Pro-San LV + teat dip, add equal volumes of Pro-San LV + Activator and Pro-San LV + Base into a clean dip cup/container and mix until the color is uniform throughout. Do not dilute. Do not mix with any other products. Mix only the amount needed for a 24 hour period. Discard any unused teat dip. Unused teat dip may be diluted with water and safely flushed down the drain.RECOMMENDED PROCEDURES FOR TEAT SANITATIONA. PRE-MILKING (PRE-DIPPING)1. Remove visible soils from the teats2. Observe foremilk by stripping two or three streams of milk into a strip cup.3. Dip or spray the cow's teats full length with READY-TO-USE PRO-SAN LV + TEAT DIP.4. Wait at least 15-30 seconds.5. Remove all teat dip by thoroughly drying the teats, teat orifices and udder with a clean, single service paper towel(s) to avoid contaminationof milk.6. Attach milking unit.B. POST-MILKING (POST-DIPPING)Immediately after milking, dip or spray all teats full length with READY-TO-USE PRO-SAN LV + TEAT DIP. Ensure good coverage of all sides of the teats and teat orifices. Allow to dry. Do not wipe. Do not turn cows out in freezing weather until teat dip is completely dry.r until teat dip is completely dry.
Active Ingredient(s)
  • Lactic Acid, Unspecified Form
Inactive Ingredient(s)
  • SODIUM BENZOATE (OJ245FE5EU)
  • UREA (8W8T17847W)
  • DODECYLBENZENESULFONIC ACID (60NSK897G9)
  • SODIUM BENZOATE (OJ245FE5EU)
  • UREA (8W8T17847W)
  • DODECYLBENZENESULFONIC ACID (60NSK897G9)
Marketing Category UNAPPROVED DRUG OTHER What is the Marketing Category?
Product types are broken down into several potential Marketing Categories, such as NDA/ANDA/BLA, OTC Monograph, or Unapproved Drug. One and only one Marketing Category may be chosen for a product, not all marketing categories are available to all product types. Currently, only final marketed product categories are included. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.

Pro-san Lv Plus Activator Images

Pro-san Lv Plus Activator Animal Product Labeling Information

The product labeling information includes all published material associated to a drug. Product labeling documents include information like generic names, active ingredients, ingredient strength dosage, routes of administration, appearance, usage, warnings, inactive ingredients, etc.

Table of Contents



Active Ingredient



Lactic Acid...........2.6%


INERT INGREDIENTS
Glycerin, Surfactants, Viscosity Builders, Food Grade Dyes and Stabilizing Agents


Indications And Usage



GENERAL RECOMMENDATIONS

To make a ready-to-use solution of Pro-San LV + teat dip, add equal volumes of Pro-San LV + Activator and Pro-San LV + Base into a clean dip cup/container and mix until the color is uniform throughout. Do not dilute. Do not mix with any other products. Mix only the amount needed for a 24 hour period. Discard any unused teat dip. Unused teat dip may be diluted with water and safely flushed down the drain.

RECOMMENDED PROCEDURES FOR TEAT SANITATION
A. PRE-MILKING (PRE-DIPPING)
1. Remove visible soils from the teats
2. Observe foremilk by stripping two or three streams of milk into a strip cup.
3. Dip or spray the cow's teats full length with READY-TO-USE PRO-SAN LV + TEAT DIP.
4. Wait at least 15-30 seconds.
5. Remove all teat dip by thoroughly drying the teats, teat orifices and udder with a clean, single service paper towel(s) to avoid contamination
of milk.
6. Attach milking unit.
B. POST-MILKING (POST-DIPPING)
Immediately after milking, dip or spray all teats full length with READY-TO-USE PRO-SAN LV + TEAT DIP. Ensure good coverage of all sides of the teats and teat orifices. Allow to dry. Do not wipe. Do not turn cows out in freezing weather until teat dip is completely dry.r until teat dip is completely dry.


Warning



Do not dilute this product.
Do not return teat dip left in the teat dipper to storage container.
Ensure that dipped teats are dry before exposing the animals to weather conditions which may cause damage to the teats.
Store at room temperature. Always store away from direct sunlight.

Protect this product from freezing. However, freezing will not affect PRO-SAN ACTIVATOR provided that the contents are thawed completely and agitated thoroughly before mixing base and activator together.

CAUTION: KEEP OUT OF REACH OF CHILDREN.
AVOID CONTACT WITH FOOD. DO NOT TAKE INTERNALLY.


First Aid Procedures



EYE CONTACT: Rinse cautiously with fresh, tepid water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing for 15 minutes. Get immediate medical advice/attention. SKIN CONTACT: For RTU products wash any sensitive areas. INGESTION: Do not induce vomiting. Never give anything by mouth to an unconscious person. Drink large amounts of water. If vomiting occurs, keep airways open. Keep head lower than the hips to prevent aspiration into the lungs. Get immediate medical advice/attention.

ALWAYS SEEK IMMEDIATE MEDICAL ATTENTION

FOR MEDICAL EMERGENCIES CALL 1-800-424-9300


* The information on this page is for an ANIMAL PRODUCT, please review the complete disclaimer below.