Animal NDC 29983-1064-8 Assure-m

N/a

Assure-m Animal Product Label Images

Assure-m Animal Product Labeling Information

The product labeling information includes all published material associated to a drug. Product labeling documents include information like generic names, active ingredients, ingredient strength dosage, routes of administration, appearance, usage, warnings, inactive ingredients, etc.

Product Labeling Index

Active Ingredients

Active Hydrogen Peroxide...........0.60%Lactic Acid……………………….…………0.70%Benzoic Acid...............................0.20%

Inert Ingredients

Glycerin..........................................6.00%Other Inerts:................................92.50%(includes Buffering Agents, Stabilizing Agents, Wetting Agents and Colorants)TOTAL.................100%

General Recommendations

1. Use teat dip applicators made of plastic or other non-corrosive materials. Do not use cups made of aluminum.2. When solution in the teat dip cup becomes visibly dirty, discard remaining contents and refill cup with fresh teat dip.3. Do not use this product for cleaning or sanitizing equipment.4. Wash Teat Dip cups after each milking.

Caution

KEEP OUT OF REACH OF CHILDREN

Protect Eyes And Mucous Membranes From Contact With This Product.First Aid Procedures

EYE CONTACT: IMMEDIATELY FLUSH EYE WITH LARGE AMOUNTS OF FRESH, TEPID WATER FOR 15 MINUTES. HOLD EYELID OPEN TO ENSURE COMPLETE IRRIGATION OF EYE AND LID TISSUES. TILT HEAD TO THE SIDE AND IRRIGATE THE EYE FROM THE BRIDGE OF THE NOSE TO THE OUTSIDE OF THE FACE. IF IRRITAITION DEVELOPS CONSULT A PHYSICIAN.SKIN CONTACT: WASH ANY SENSITIVE AREAS.INGESTION: DRINK TWO GLASSES OF WATER AND CONSULT A PHYSICIANALWAYS SEEK IMMEDIATE MEDICAL ATTENTIONFOR MEDICAL EMERGENCIES CALL 1-800-424-9300

Recommended Procedures For Teat Sanitation:

A. PRE-MILKING (PRE-DIPPING)1. Remove visible soils from the teats.2. Observe formilk by stripping two or three streams of milk into a strip cup.3. Dip or spray the cow's teats full length with ASSURE-M Teat Dip.4. Wait approximately 30 seconds.5. Remove all teat dip by thoroughly drying the teats and teat orifices and udder (if foaming or spraying) with a clean, single service paper towels(s).6. Attach milking unit.B. POST-MILKING (POST-DIPPING)1. Immediately after milking, dip or spray all teats full length with ASSURE-M Teat Dip. Ensure good coverage of all sides of the teats and teat orifices.A PART OF THE COMPLETE IBA SANITATION PROGRAM

* The information on this page is for an ANIMAL PRODUCT, please review the complete disclaimer below.