Humalog
Product Images NDC 0002-7533

Product Visual Gallery

This gallery contains 93 technical images submitted to the FDA as part of the official labeling for Humalog (NDC 0002-7533). Unlike standard consumer photos, these assets often include clinical data figures, molecular chemical structures, and official manufacturer packaging layouts.

As provided by Eli Lilly And Company, these visuals offer a comprehensive scientific overview of the product's physical and chemical identity, aiding pharmacists and researchers in product verification and study.

FDA Label Image

Exclamation (Exclamation V2)

The image shows a vial containing diluent injection, solution from Eli Lilly and Company. The vial label indicates it is for drug processing use with available strengths including 1 mL/mL, 100 iU/mL, and 200 iU/mL.*

FDA Label Image

Figure (Humalog 5sec Clock)

An instructional illustration depicting a circular timer set to 5 seconds, indicating a timed step in a process related to the product. The image shows a bold arrow pointing to the 5-second mark on the circle.*

FDA Label Image

Figure (Humalog Qr)

Chemical structure diagram of the active ingredient diluent in injection solution form, as provided in the product labeling from Eli Lilly and Company.*

FDA Label Image

Package Carton – Humalog Cartridge 5ct X 3 mL (Humalog Cartridge Cart 004 05)

Packaging label for Humalog insulin lispro injection, U-100 strength, presented in 5 x 3 mL cartridges. The label highlights it is for single patient use only and prescription use. It includes detailed warnings, ingredients, and manufacturer information from Lilly USA, LLC.*

FDA Label Image

Figure 1 (Humalog F001 V3)

A line graph comparing blood glucose levels (mg/dL) over time (minutes) following administration of Humalog and Humulin R injections in subjects (n=10 each). The graph shows glucose concentration trends over 480 minutes with mean dose 15.4 units indicated.*

FDA Label Image

Figure 2 (Humalog F003 V2)

Line graph showing serum free insulin concentration (mU/L) over time (minutes) comparing Humalog and Humulin R insulin products, displaying changes in insulin levels over an 8-hour period with indication of mean dose at 15.4 units.*

FDA Label Image

Figure (Humalog Inj Sites V1)

An anatomical illustration showing injection sites on the human body for the product. The diagram highlights front and back views, with marked areas on the abdomen, thighs, and buttocks indicating recommended injection locations.*

FDA Label Image

Figure (Humalog Jr Ifu 1 V1)

Humalog Junior KwikPen insulin lispro injection pen device is shown, featuring a dosing dial and cap. The label includes the product name and indicates it is an injectable solution for subcutaneous use. The device is primarily gray with an orange and white label and is manufactured by Eli Lilly and Company.*

FDA Label Image

Figure (Humalog Jr Ifu 10 V2)

Packaging label showing a portion of a vial or syringe with a measurement scale marked at 0.5 mL. The label appears to be for a diluent injection solution by Eli Lilly and Company, intended as a drug for further processing. The image focuses on the measurement markings on the container.*

FDA Label Image

Figure (Humalog Jr Ifu 11 V2)

An illustration showing a close-up of a vial with a volume measurement window, marked with increments from 7 to 9, and a red arrow pointing upward at the vial's cap, indicating the action of removing or lifting the cap.*

FDA Label Image

Figure (Humalog Jr Ifu 12 V2)

An instructional diagram showing a close-up of a syringe barrel with a zoomed-in view highlighting the dosing scale. The scale includes visible markings for 3, 4, and 5 units, with a red arrow pointing specifically at the 4-unit mark. This illustration likely demonstrates the correct measurement or reading technique for the syringe dosage.*

FDA Label Image

Figure (Humalog Jr Ifu 13 V2)

An illustration showing a close-up view of a syringe barrel with a measurement scale marked in milliliters. A red arrow points to a section near the 1.0 mL mark on the syringe's measurement scale. The syringe is shown in a horizontal orientation with a transparent barrel and black plunger.*

FDA Label Image

Figure (Humalog Jr Ifu 14 V3)

An instructional illustration showing a hand holding a syringe at the waistband of a person's pants, demonstrating how to administer an injection, likely subcutaneous, into the abdominal area.*

FDA Label Image

Figure (Humalog Jr Ifu 15 V3)

An illustration showing a close-up view of a syringe or injection vial with a measurement scale indicating dosage increments from 0 to 1 mL. The image highlights the measurement markings for precise dosing of a solution.*

FDA Label Image

Figure (Humalog Jr Ifu 16 V3)

An instructional illustration showing a hand holding an injection pen or syringe, with a cap being removed by pulling it away, indicated by a red arrow. The image demonstrates how to prepare the injection device for use with a diluent injection solution.*

FDA Label Image

Figure (Humalog Jr Ifu 17 V3)

An instructional illustration showing a hand holding a vial or syringe with a red ribbon or strip wrapped around the neck. The drawing style is simple, focusing on the handling of the injection device, likely related to the diluent injection solution.*

FDA Label Image

Figure (Humalog Jr Ifu 18 V3)

An instructional illustration showing a pen-like injection device with its cap on the left and an arrow pointing to the right, indicating removal of the cap from the device. No text or branding is visible in the image.*

FDA Label Image

Figure (Humalog Jr Ifu 2 V1)

An instructional diagram of the HUMALOG Junior KwikPen showing its parts including Pen Cap with Cap Clip, Cartridge Holder with Rubber Seal and Plunger, Pen Body with Label, Dose Indicator, Dose Window, and Dose Knob. It also illustrates Pen Needle Parts—Outer Needle Shield, Inner Needle Shield, Needle, and Paper Tab—alongside a separate image of the Dose Knob.*

FDA Label Image

Figure (Humalog Jr Ifu 3 V2)

An instructional diagram showing an injection device with a large red arrow pointing left, indicating the direction for removing or sliding a component, likely a cap or cover, from the device tip.*

FDA Label Image

Figure (Humalog Jr Ifu 4 V1)

An instructional illustration showing a person's hand twisting the cap off a small vial or container, indicated by a red curved arrow demonstrating the removal direction.*

FDA Label Image

Figure (Humalog Jr Ifu 5 V1)

Illustration showing the process of attaching or securing a needle cap or cover onto a syringe tip by twisting or rotating, indicated by a red arrow wrapping around the connection point.*

FDA Label Image

Figure (Humalog Jr Ifu 6 V1)

An instructional diagram showing a step to keep the outer needle shield and discard the inner needle shield from a syringe. It includes images of a syringe part with labels 'Keep Outer Needle Shield' and 'Throw Away Inner Needle Shield' along with a red arrow pointing left.*

FDA Label Image

Figure (Humalog Jr Ifu 7 V2)

An illustration showing a close-up of a syringe with a dosage window marked with measurement lines, and a red arrow pointing upward, indicating a step likely related to adjusting or removing the syringe cap or plunger.*

FDA Label Image

Figure (Humalog Jr Ifu 8 V2)

An instructional illustration showing hands holding and rotating a syringe with a solution inside. The image demonstrates proper mixing or preparation technique for an injectable solution, indicating rotation of the syringe by the fingers.*

FDA Label Image

Figure (Humalog Jr Ifu 9 V2)

An instructional illustration showing a hand holding a syringe with a vial or cartridge. The image includes a magnified inset highlighting the syringe needle and its positioning. An arrow pointing upward at the bottom suggests a motion or direction for using the syringe.*

FDA Label Image

Package Carton – Humalog Junior Kwikpen (Humalog Jr Pen Carton 035 02)

Packaging label for Humalog Junior KwikPen insulin lispro injection, 100 units per mL (U-100), prefilled in 5 x 3 mL pens. The label indicates it is for single patient use only and includes storage and warning information. Marketed by Lilly USA, LLC, with instructions and contact information provided.*

FDA Label Image

Primary Structure (Humalog Structure V1)

Chemical structure diagram showing the amino acid sequence of the A-Chain and B-Chain of a protein, with numbered residues and disulfide bonds connecting chains, depicting the molecular structure of the active ingredient or peptide.*

FDA Label Image

Figure (Humalog Tp Ifu 1 V1)

Humalog Tempo Pen insulin lispro injection pen device with a teal body and a white label featuring red accents. The label includes the product name, insulin type, and a numeric dosage scale on a blue section near the purple cap. Also noted is that the device is for single patient use only. The labeler is Eli Lilly and Company.*

FDA Label Image

Figure (Humalog Tp Ifu 11 V1)

An instructional illustration showing a person injecting a solution into the abdomen area. The image highlights the correct injection technique, with one hand pinching the skin and the other holding a syringe with the needle angled into the skin fold.*

FDA Label Image

Figure (Humalog Tp Ifu 12 V1)

An illustration showing part of a medical injection device with a blue body and a maroon cap or plunger. A small rectangular white label with the numbers "0 10" is visible on the blue portion, likely indicating measurement markings or settings relevant to dosing.*

FDA Label Image

Figure (Humalog Tp Ifu 13 V2)

An instructional illustration showing the step of removing the cap from an injector pen device by pulling it off in the direction indicated by a red arrow. The image depicts a blue injector pen with a transparent middle section and a separate blue cap positioned to the left.*

FDA Label Image

Figure (Humalog Tp Ifu 2 V1)

An instructional diagram of the parts of a Tempo Pen injector and its needle components. It labels the Pen Cap with Cap Clip, Cartridge Holder with Rubber Seal and Plunger, Pen Body with Label and Dose Indicator including Dose Window, Dose Knob, Outer Needle Shield, Inner Needle Shield, Needle with Paper Tab, and a separate illustration of the Dose Knob viewed from the front.*

FDA Label Image

Figure (Humalog Tp Ifu 3 V2)

An instructional illustration showing a step where a blue injector device is being separated from a clear vial or cartridge. A red arrow points leftward, indicating the direction to pull the injector away from the vial, demonstrating disconnection or removal.*

FDA Label Image

Figure (Humalog Tp Ifu 4 V1)

An instructional illustration showing a syringe with measurement markings from 1 to 4 and a purple plunger partially pulled back. A red arrow points upward along the plunger, indicating the direction to pull the syringe plunger for drawing or measuring liquid.*

FDA Label Image

Figure (Humalog Tp Ifu 5 V2)

An instructional diagram showing a hand adjusting the dose knob of an injection device. The magnified inset highlights the dose knob mechanism with a visual representation of dye or liquid droplets, indicating dose setting or delivery.*

FDA Label Image

Figure (Humalog Tp Ifu 6 V1)

A close-up image of a diluent injection solution vial with a purple screw cap, showing a partial label with numeric markings indicating volume. The product is a diluent for injection available in various strengths, manufactured by Eli Lilly and Company.*

FDA Label Image

Figure (Humalog Tp Ifu 7 V1)

An instructional illustration showing a close-up of a device or syringe with a numeric scale ranging from 6 to 10, and a red arrow pointing upwards at the 8 mark, indicating an adjustment or measurement step. The image includes gloved fingers operating the device.*

FDA Label Image

Figure (Humalog Tp Ifu 8 V1)

An illustration showing a close-up view of a syringe or dosing device with a transparent window displaying measurement markings. A red arrow points to the marking at 12 units, indicating a precise dose setting.*

FDA Label Image

Figure (Humalog Tp Ifu 9 V1)

An instructional diagram showing a syringe with measurement markings. A red arrow points to the space between the 24 and 26 markings on the syringe, indicating a specific volume to be drawn or measured.*

FDA Label Image

Package Carton – Humalog Tempo Pen (Humalog Tpen Carton 047 00)

Packaging label for Humalog Tempo Pen insulin lispro injection, 100 units per mL U-100 strength. The label indicates a 5 x 3 mL prefilled pen pack, a prefilled insulin delivery device for subcutaneous use. The labeler is Eli Lilly and Company, with storage and usage instructions, warnings, and contact information included.*

FDA Label Image

Figure (Humalog U100 Ifu 1 V3)

Humalog KwikPen insulin lispro injection pen device featuring a blue plastic body with a white and maroon label. The label displays the inscription 'Humalog KwikPen insulin lispro injection' along with the phrase 'For Single Patient Use Only' and shows a dose indicator window near the pen tip.*

FDA Label Image

Figure (Humalog U100 Ifu 10 V2)

Packaging label of a diluent injection solution vial with a visible portion of a measurement scale or marking on the vial. The label shows a blue background with a white area containing measurement markings. The vial cap is also blue, matching the label's color scheme. No specific strength or volume markings are fully visible.*

FDA Label Image

Figure (Humalog U100 Ifu 11 V2)

An instructional illustration showing a close-up of a hand holding and adjusting a blue dosing device or syringe with a visible volume scale indicating increments between 8 and 10 mL. A red arrow points upward, suggesting an action to turn or slide the device to set the dose.*

FDA Label Image

Figure (Humalog U100 Ifu 12 V2)

An illustration showing a dosing window on an injection vial or pen device. The window displays numeric dosage markings from 10 to 12, with a red arrow pointing specifically at the 12 unit mark, indicating a dosage selection or setting mechanism.*

FDA Label Image

Figure (Humalog U100 Ifu 13 V2)

An instructional diagram showing a close-up view of a measuring scale with numbered increments from 0 to 8 and a highlighted window displaying the numbers 24 and 26. A red arrow points to the number 26, indicating a specific measurement. The image likely illustrates dose or volume adjustment on a medical device or syringe.*

FDA Label Image

Figure (Humalog U100 Ifu 16 V1)

An instructional diagram showing a person administering an injection. The illustration depicts one hand holding a syringe and the other hand stabilizing the injection site on the upper arm near the shoulder area.*

FDA Label Image

Figure (Humalog U100 Ifu 18 V1)

An instructional illustration showing a hand holding a syringe with a protective cap being removed by pulling it away from the syringe. The syringe barrel has visible measurement markings indicating volume in milliliters.*

FDA Label Image

Figure (Humalog U100 Ifu 19 V1)

An instructional illustration showing a hand holding a syringe. The syringe has measurement markings and a red spiral band around its barrel, likely demonstrating a step in using or preparing the injection solution labeled as diluent by Eli Lilly and Company.*

FDA Label Image

Figure (Humalog U100 Ifu 2 V3)

An instructional diagram of a KwikPen insulin injection device showing labeled parts including the cap clip, pen clip, rubber seal, cartridge holder, plunger, label, pen body, dose indicator, dose knob, and dose window. Additional labeled parts illustrate the pen needle assembly (outer needle shield, inner needle shield, needle, paper tab) and a separate view of the dose knob.*

FDA Label Image

Figure (Humalog U100 Ifu 20 V3)

An instructional diagram showing a diluent injection solution pen device with a removable blue cap. A red arrow points to the left, indicating the removal direction of the cap from the pen. The pen has measurement markings visible on its clear section and a blue body, consistent with use in preparing or administering the diluent injection.*

FDA Label Image

Figure (Humalog U100 Ifu 3 V2)

An instructional illustration showing the removal of a blue cap from a white injection vial or syringe. A red arrow points leftward, indicating the direction to pull the cap off before use. The image conveys a step in preparing an injection solution for administration.*

FDA Label Image

Figure (Humalog U100 Ifu 4 V1)

An instructional illustration depicting a hand twisting to open a small vial or ampule cap, indicating how to access the contents for further processing or mixing.*

FDA Label Image

Figure (Humalog U100 Ifu 5 V1)

An instructional illustration showing the removal of a red protective seal from the tip of a diluent injection solution vial or syringe. The image emphasizes peeling back the seal to access the contents. No text or other product details are visible.*

FDA Label Image

Figure (Humalog U100 Ifu 6 V1)

An instructional diagram showing the removal and disposal of needle shields for an injection solution. It illustrates keeping the outer needle shield on and throwing away the inner needle shield before use.*

FDA Label Image

Figure (Humalog U100 Ifu 7 V2)

An instructional diagram featuring a close-up view of a measuring scale marked with units 0, 1, 2, and 4, alongside a red arrow pointing upward, suggesting an adjustment or movement action.*

FDA Label Image

Figure (Humalog U100 Ifu 8 V2)

An instructional illustration showing a hand preparing a syringe with a liquid solution. One hand holds the syringe while the other hand is adjusting the plunger, demonstrating the technique for drawing or expelling fluid from the syringe.*

FDA Label Image

Figure (Humalog U100 Ifu 9 V2)

An instructional illustration depicting a hand holding a syringe with a diluent solution for injection. The image includes a magnified circular inset showing a close-up detail of the syringe tip or needle preparation, indicating a step in the process using an arrow pointing upward from a part of the syringe.*

FDA Label Image

Package Carton – Humalog Kwikpen 5ct (Humalog U100 Kpen Carton 017 04)

Packaging label for Humalog KwikPen insulin lispro injection, U-100 strength with 100 units per mL, in a prefilled insulin delivery device. The label indicates a pack of 5 x 3 mL prefilled pens, marked by Lilly USA, LLC. It includes warnings, usage instructions, and contact information, emphasizing single patient use and that needles are not included.*

FDA Label Image

Figure (Humalog U200 Ifu 1 V3)

Humalog KwikPen insulin lispro injection pen showing a dark gray pen with a label indicating it is for single patient use only and contains 200 units per mL. The pen features a dosage window displaying a dose number and a purple ring detail near the cap. The labeler is Eli Lilly and Company.*

FDA Label Image

Figure (Humalog U200 Ifu 10 V2)

An instructional illustration depicting a hand holding a vial labeled with a yellow tag, connected to a syringe. The image includes a zoomed-in circular inset showing a close-up of the syringe needle inserted into the vial. A red arrow at the bottom indicates an upward motion, suggesting the action of pulling or drawing liquid from the vial into the syringe.*

FDA Label Image

Figure (Humalog U200 Ifu 11 V1)

Packaging label showing a vial containing diluent in injection solution form. The label displays a measurement scale with visible graduations indicating volume in milliliters. The vial is capped and the label shows partial numerical markings for dosage measurement. The product is labeled under Eli Lilly and Company.*

FDA Label Image

Figure (Humalog U200 Ifu 12 V2)

Illustration showing a close-up of a hand pulling a tab marked with the number 8 and an upward-pointing red arrow, indicating the action of removing or opening a component, likely related to preparing or accessing the diluent injection solution.*

FDA Label Image

Figure (Humalog U200 Ifu 13 V3)

An illustration showing a measurement scale on an injection syringe with a red arrow pointing at the level marked 12, indicating a volume measurement for dosing or preparation.*

FDA Label Image

Figure (Humalog U200 Ifu 14 V2)

An instructional diagram showing a close-up of a measuring scale with numbers 24 and 26 prominently displayed, and a red arrow pointing to the number 26 on the scale. The image appears to guide precise measurement related to the diluent injection solution by Eli Lilly and Company.*

FDA Label Image

Figure (Humalog U200 Ifu 16 V2)

An instructional illustration showing a person inserting a syringe needle into the skin of their abdomen, likely demonstrating the proper technique for injection administration.*

FDA Label Image

Figure (Humalog U200 Ifu 19 V3)

An instructional diagram showing a hand holding an injection solution pen labeled with a caution symbol. The hand is removing or detaching the pen's protective cap, indicated by a red arrow pointing away from the pen tip.*

FDA Label Image

Figure (Humalog U200 Ifu 2 V1)

A yellow warning label with black text advising not to transfer the solution to a syringe due to risk of severe overdose. The label emphasizes safety precautions for handling the drug for further processing, diluent injection solution by Eli Lilly and Company.*

FDA Label Image

Figure (Humalog U200 Ifu 20 V3)

An illustration showing a hand holding a syringe labeled as a diluent injection solution. The syringe is capped and has a yellow label with a red spiral band around it, indicating preparation or handling instructions.*

FDA Label Image

Figure (Humalog U200 Ifu 21 V3)

An instructional illustration showing an ampule with a yellow warning label. A red arrow indicates the direction to snap the ampule open at the neck. This diagram appears to demonstrate how to open the diluent injection solution ampule by Eli Lilly and Company.*

FDA Label Image

Figure (Humalog U200 Ifu 3 V3)

An illustration diagram showing detailed parts of a KwikPen insulin injection device and its needle components. The pen parts labeled include the pen cap with cap clip, rubber seal, cartridge holder with a caution label, plunger, pen body with label, dose window, dose indicator, and dose knob. Needle parts are displayed separately, including outer needle shield, inner needle shield, needle (not included), and paper tab.*

FDA Label Image

Figure (Humalog U200 Ifu 4 V2)

An instructional diagram showing a needle being withdrawn from a vial or syringe. The arrow points left, indicating the direction to pull the needle away from the vial or syringe. This image likely illustrates safe handling or preparation procedures for an injectable solution.*

FDA Label Image

Figure (Humalog U200 Ifu 5 V2)

Illustration showing a hand twisting or removing the cap from a vial, indicating the first step in preparing an injection. An arrow highlights the motion of removing the cap.*

FDA Label Image

Figure (Humalog U200 Ifu 6 V2)

An instructional illustration showing the removal of a protective cap from a syringe. The visual features a needle cover being twisted or pulled off, indicated by red arrows, demonstrating the first step in preparing the syringe for use.*

FDA Label Image

Figure (Humalog U200 Ifu 7 V2)

An instructional diagram showing the removal process of a needle shield. It illustrates keeping the outer needle shield while discarding the inner needle shield by pulling it off as indicated by an arrow pointing left.*

FDA Label Image

Figure (Humalog U200 Ifu 8 V2)

An instructional illustration showing a close-up of a syringe or pen device. The image highlights a dosage window with markings for 0, 1, and 2, and an arrow pointing upward, indicating an action such as adjusting or setting the dose on the device.*

FDA Label Image

Figure (Humalog U200 Ifu 9 V2)

Illustration showing hands holding and touching a syringe or injection pen labeled as a diluent solution for injection. The image indicates a user interaction with the syringe, possibly demonstrating preparation or activation steps.*

FDA Label Image

Package Carton (HUMALOG U200 KwikPen 2ct)

Packaging label for Humalog KwikPen insulin lispro injection, 200 units per mL (U-200), in prefilled injection solution form. The box contains 2 x 3 mL prefilled pens for subcutaneous use, marketed by Lilly USA, LLC. The label includes dosing warnings, usage instructions, and barcodes.*

FDA Label Image

Package Carton – Humalog 10 mL Vial 1ct (Humalog Vial Carton 23 02)

Packaging label for Humalog U-100 insulin lispro injection, 100 units per mL, 10 mL vial. The label includes the brand name Humalog, active ingredient insulin lispro injection, dosage strength U-100, and manufacturer Lilly USA, LLC. Additional details include storage instructions to refrigerate and not freeze, warnings about insulin dosage changes, and contact information for Lilly.*

FDA Label Image

Figure (Humalog Vial Ifu 1 V5)

Packaging label of Humalog insulin lispro injection in a 10 mL vial. The label shows the product name Humalog, indicating it is insulin lispro, with labeling for 100 units per mL. The vial includes a protective cap and a rubber stopper beneath the cap. The labeler is Eli Lilly and Company.*

FDA Label Image

Figure (Humalog Vial Ifu 10)

An instructional illustration showing two hands drawing liquid from a vial into a syringe. A close-up inset highlights the syringe barrel marked with volume measurements, focusing on the liquid level around 30 units.*

FDA Label Image

Figure (Humalog Vial Ifu 11)

An instructional illustration showing a hand holding a vial and another hand drawing liquid from the vial using a syringe. An arrow indicates the motion of inserting the syringe into the vial to withdraw the solution. This diagram likely demonstrates the proper technique for preparing an injection solution.*

FDA Label Image

Figure (Humalog Vial Ifu 12 V2)

An anatomical diagram showing preferred injection sites on the front and back of a human body. The front view highlights areas on the abdomen and outer thighs, while the back view highlights areas on the lower back and upper buttocks.*

FDA Label Image

Figure (Humalog Vial Ifu 13)

An instructional illustration showing a person holding a syringe and injecting into the skin of the abdomen, with an arrow indicating the direction of injection. The image appears to demonstrate the proper technique for subcutaneous injection.*

FDA Label Image

Figure (Humalog Vial Ifu 14)

An instructional diagram showing an injection being administered into the lower back or flank area of a person's body. One hand is holding the injection device, while the other hand is stabilizing the area. The illustration includes an arrow indicating the direction of needle insertion.*

FDA Label Image

Figure (Humalog Vial Ifu 15)

An instructional illustration showing a hand holding a syringe injecting into the skin of a person's abdomen, demonstrating the correct injection technique for the diluent solution.*

FDA Label Image

Figure (Humalog Vial Ifu 2 V3)

An instructional diagram of a syringe showing its parts labeled as Needle Shield, Needle, Plunger Tip, Syringe Body, and Plunger. The image highlights a 20-unit dose example on the syringe scale, with a close-up inset illustrating the plunger tip position at 20 units.*

FDA Label Image

Figure (Humalog Vial Ifu 3)

An instructional illustration showing a hand holding a vial and another hand lifting or removing the vial's cap by grasping it from the top. The vial appears to be a small injection solution container, and an arrow indicates the upward movement of the cap removal.*

FDA Label Image

Figure (Humalog Vial Ifu 4)

An instructional illustration showing a person holding a small vial with one hand while using the other hand to twist and remove the vial's protective cap. The image demonstrates the proper technique for opening the vial.*

FDA Label Image

Figure (Humalog Vial Ifu 5)

Instructional illustration showing a hand holding a syringe with a needle and a vial or container. The image highlights the syringe's volume markings up to 40 units and includes a downward arrow indicating an injection or withdrawal motion, likely demonstrating preparation or administration technique for an injectable solution.*

FDA Label Image

Figure (Humalog Vial Ifu 6)

An instructional illustration showing two hands preparing an injection. One hand holds a vial or ampule, and the other hand holds a syringe with the needle being inserted into the vial or ampule, indicated by an arrow pointing downwards. This likely depicts the step of drawing solution into the syringe for an injection.*

FDA Label Image

Figure (Humalog Vial Ifu 7)

An instructional illustration showing a hand holding a syringe and inserting it into a small vial or ampule, demonstrating the process of drawing solution from the vial into the syringe. The image includes an arrow indicating the direction of syringe insertion.*

FDA Label Image

Figure (Humalog Vial Ifu 8)

An instructional illustration showing a hand holding a vial and another hand inserting a syringe needle into the vial. A downward arrow indicates the motion of inserting the needle. An inset shows a close-up view of a syringe barrel marked with measurement increments up to 40 units.*

FDA Label Image

Figure (Humalog Vial Ifu 9)

An instructional illustration showing hands preparing an injection using a vial and a syringe. One hand holds the vial upside down while the other hand pulls back the syringe plunger to draw liquid from the vial.*

* About these descriptions: Image descriptions on this page are generated by automated AI analysis of the product label images from the manufacturer's FDA label submission (SPL). They are provided for reference only and may contain errors or omissions. Always rely on the printed label itself and the official FDA labeling, and consult a pharmacist or healthcare professional with any questions about this product.