Sodium Chloride Irrigant
FDA Label NDC 0264-2201

Each 100 mL contains:
Sodium Chloride USP 0.9 g; Water for Injection USP qs

pH adjusted with Hydrochloric Acid NF
pH: 5.0 (4.5–7.0)      Calculated Osmolarity: 310 mOsmol/liter

Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154

0.9% Sodium Chloride Irrigation USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents.

The formula of the active ingredient is:

The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert.

The PIC™ Container is PVC-free and DEHP-free.

0.9% Sodium Chloride Irrigation USP is utilized for a variety of clinical indications such as sterile irrigation of body cavities, tissues or wounds, indwelling urethral catheters, surgical drainage tubes, and for washing, rinsing or soaking surgical dressings, instruments and laboratory specimens. It also serves as a diluent or vehicle for drugs used for irrigation or other pharmaceutical preparations.

0.9% Sodium Chloride Irrigation USP provides an isotonic saline irrigation identical in composition with 0.9% Sodium Chloride Injection USP (normal saline).

Physiological irrigation solutions are considered generally compatible with living tissues and organs.

Sodium, the major cation of the extracellular fluid, functions primarily in the control of water distribution, fluid balance, and osmotic pressure of body fluids. Sodium is also associated with chloride and bicarbonate in the regulation of the acid-base equilibrium of body fluid.

Chloride, the major extracellular anion, closely follows the metabolism of sodium, and changes in the acid-base balance of the body are reflected by changes in the chloride concentration.

0.9% Sodium Chloride Irrigation USP is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.

0.9% Sodium Chloride Irrigation USP is not for injection by usual parenteral routes.

An electrolyte solution should not be used for irrigation during electrosurgical procedures.

FOR IRRIGATION ONLY. NOT FOR INJECTION.

Irrigating fluids have been demonstrated to enter the systemic circulation in relatively large volumes; thus, irrigation solutions must be regarded as systemic drugs. Absorption of large amounts can cause fluid and/or solute overload resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema.

The risk of dilutional states is inversely proportional to the electrolyte concentrations of the administered parenteral solutions. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentration.

Do not warm above 150°F (66°C).

After opening container, its contents should be used promptly to minimize the possibility of bacterial growth or pyrogen formation.

Discard unused portion of irrigating solution since it contains no preservatives.

Use aseptic technique when preparing and administering sterile irrigation solutions.

Use only if solution is clear and container and seal are intact.

Do not use for irrigation that may result in absorption of large amounts of fluid into the blood.

Caution should be observed when the solution is used for continuous irrigation or allowed to "dwell" inside body cavities because of possible absorption into the blood stream and the production of circulatory overload.

When used for irrigation via appropriate irrigation equipment, the administration set should be attached promptly. Unused portions should be discarded and a fresh container of appropriate size used for the start up of each cycle or repeat procedure. For repeated irrigations of urethral catheters, a separate container should be used for each patient.

Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance after prolonged irrigation, when fluid absorption is suspected, or whenever the condition of the patient warrants such evaluation.

Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic technique. Mix thoroughly. Do not store.

Studies with 0.9% Sodium Chloride Irrigation USP have not been performed to evaluate carcinogenic potential, mutagenic potential, or effects on fertility.

Animal reproduction studies have not been conducted with 0.9% Sodium Chloride Irrigation USP. It is also not known whether 0.9% Sodium Chloride Irrigation USP can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. 0.9% Sodium Chloride Irrigation USP should be given to a pregnant woman only if clearly needed.

Safety and effectiveness of 0.9% Sodium Chloride Irrigation USP during labor and delivery have not been established. Caution should be exercised, and the fluid balance, glucose and electrolyte concentrations, and acid-base balance, of both mother and fetus should be evaluated periodically or whenever warranted by the condition of the patient or fetus.

It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when 0.9% Sodium Chloride Irrigation USP is administered to a nursing woman.

The safety and effectiveness of 0.9% Sodium Chloride Irrigation USP in pediatric patients have not been established. Its limited use in pediatric patients has been inadequate to fully define proper dosage and limitations for use.

Clinical studies of 0.9% Sodium Chloride Irrigation USP did not include a sufficient number of patients age 65 years and over to determine whether they respond differently from younger subjects. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy.

This drug is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function. Frequent laboratory determinations and clinical evaluations are recommended to monitor changes in blood glucose, electrolyte concentrations, and renal function.

Possible adverse effects arising from the irrigation of body cavities, tissues, or indwelling catheters and tubes can be minimized when proper procedures are followed. Displaced catheters or drainage tubes can lead to irrigation or infiltration of unintended structures or cavities. Excessive volume or pressure during irrigation of closed cavities may cause undue distension or disruption of tissues. Accidental contamination from careless technique may transmit infection.

If an adverse reaction does occur, discontinue administration of the irrigant, evaluate the patient, institute appropriate therapeutic countermeasures, and save the remainder of the fluid for examination if deemed necessary.

In the event of overhydration or solute overload, reevaluate the patient's condition, and institute appropriate corrective treatment. Intravasular volume overload may respond to hemodialysis. See WARNINGS, PRECAUTIONS, and ADVERSE REACTIONS.

As required for irrigation.

When used as a diluent, or vehicle for other drugs, the drug manufacturer's recommendations should be followed.

Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store.

Solutions should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permits.

0.9% Sodium Chloride Irrigation USP is supplied sterile and nonpyrogenic in PIC™ (Plastic Irrigation Container). The 1000 mL and 500 mL containers are packaged 16 per case, the 2000 mL containers are packaged 8 per case, and the 4000 mL containers are packaged 4 per case.

Exposure of pharmaceutical products to heat should be minimized. Avoid excessive heat. Protect from freezing. It is recommended that the product be stored at room temperature (25°C); however, brief exposure up to 40°C does not adversely affect the product.

Do not warm above 150°F (66°C).

Not for injection.

Aseptic technique is required.

• Caution – Before use, perform the following checks:
  
  (a)  Read the label. Ensure solution is the one ordered and is within the expiration date.
  
  (b)  Invert container and inspect the solution in good light for cloudiness, haze, or particulate matter; check the
         container for leakage or damage. Any container which is suspect should not be used.
  
  Use only if solution is clear and container and seal are intact
  
  Single unit container. Discard unused portion.
  
• Outer Closure Removal – Grasp the container with one hand and turn the breakaway ring counterclockwise with the other hand until slight resistance is felt. Then, twisting the container in the opposite direction, turn the breakaway ring sharply until the entire outer cap is loose and can be lifted off.
  
  

  Figure 1 (Sodium Chloride Irrigation In Pic 1)

  
  
• Connect the administration set through the sterile set port according to set instructions or remove screw cap and pour.
  
  

  Figure 2 (Sodium Chloride Irrigation In Pic 2)

  
  
• Do not warm above 150°F (66°C) to assure minimal bottle distortion. Keep bottles upright.

0.9% Sodium Chloride
Irrigation USP

Isotonic Solution for Irrigation

REF R5200-01
NDC 0264-2201-00

1000 mL
PIC™ Container

Lot
Exp.

Y37-002-348

Each 100 mL contains:
Sodium Chloride USP 0.9 g
Water for Injection USP qs
pH adjusted with Hydrochloric
Acid NF

pH: 5.0 (4.5-7.0)
Calc. Osmolarity: 310 mOsmol/liter

Electrolytes (mEq/liter):
Sodium 154     Chloride 154

Sterile, nonpyrogenic. Single unit
container. Discard unused portion.

Not for Injection. Use only if solution
is clear and container and seal are
intact.

Warning: Do not warm above
150°F (66°C).

Recommended Storage:
Room temperature (25°C). Avoid
excessive heat. Protect from freezing.

See Package Insert.

Rx only

PVC-free and DEHP-free

B. Braun Medical Inc.
Irvine, CA 92614-5895 USA
Made in USA

PIC is a trademark of
B. Braun Medical Inc.

1000 mL Container Label R5200-01 (Sodium Chloride Irrigation In Pic 3)

0.9% Sodium Chloride
Irrigation USP

Isotonic Solution for Irrigation

REF R5201-01
NDC 0264-2201-10

500 mL
PIC™ Container

Lot
Exp.

Y37-002-347

Each 100 mL contains:
Sodium Chloride USP 0.9 g
Water for Injection USP qs
pH adjusted with Hydrochloric
Acid NF

pH: 5.0 (4.5-7.0)
Calc. Osmolarity: 310 mOsmol/liter

Electrolytes (mEq/liter):
Sodium 154     Chloride 154

Sterile, nonpyrogenic. Single unit
container. Discard unused portion.

Not for Injection. Use only if solution
is clear and container and seal are
intact.

Warning: Do not warm above
150°F (66°C).

Recommended Storage:
Room temperature (25°C). Avoid
excessive heat. Protect from freezing.
See Package Insert.

Rx only

PVC-free and DEHP-free

B. Braun Medical Inc.
Irvine, CA 92614-5895 USA
Made in USA

PIC is a trademark of
B. Braun Medical Inc.

500 mL Container Label R5201-01 (Sodium Chloride Irrigation In Pic 4)

0.9% Sodium Chloride
Irrigation USP

Isotonic Solution for Irrigation

REF R5205-01
NDC 0264-2201-50

2000 mL
PIC™ Container

Lot
Exp.

Y37-002-349

Each 100 mL contains:
Sodium Chloride USP 0.9 g
Water for Injection USP qs
pH adjusted with Hydrochloric
Acid NF

pH: 5.0 (4.5-7.0)
Calc. Osmolarity: 310 mOsmol/liter

Electrolytes (mEq/liter):
Sodium 154     Chloride 154

Sterile, nonpyrogenic. Single unit
container. Discard unused portion.

Not for Injection. Use only if solution
is clear and container and seal are
intact.

Warning: Do not warm above
150°F (66°C).

Recommended Storage:
Room temperature (25°C). Avoid
excessive heat. Protect from freezing.

See Package Insert.

Rx only

PVC-free and DEHP-free

B. Braun Medical Inc.
Irvine, CA 92614-5895 USA
Made in USA

PIC is a trademark of
B. Braun Medical Inc.

2000 mL Container Label R5205-01 (Sodium Chloride Irrigation In Pic 5)

0.9% Sodium Chloride
Irrigation USP

Isotonic Solution for Irrigation

REF R5207
NDC 0264-2201-70

4000 mL
PIC™ Container

Lot
Exp.

Y37-002-350

Each 100 mL contains:
Sodium Chloride USP 0.9 g
Water for Injection USP qs
pH adjusted with Hydrochloric
Acid NF

pH: 5.0 (4.5-7.0)
Calc. Osmolarity: 310 mOsmol/liter

Electrolytes (mEq/liter):
Sodium 154     Chloride 154

Sterile, nonpyrogenic. Single unit
container. Discard unused portion.

Not for Injection. Use only if solution
is clear and container and seal are
intact.

Warning: Do not warm above
150°F (66°C).

Recommended Storage:
Room temperature (25°C). Avoid
excessive heat. Protect from freezing.
See Package Insert.

Rx only

PVC-free and DEHP-free

B. Braun Medical Inc.
Irvine, CA 92614-5895 USA
Made in USA

PIC is a trademark of
B. Braun Medical Inc.

4000 mL Container Label R5207 (Sodium Chloride Irrigation In Pic 6)