Hydromorphone Hydrochloride
Product Images NDC 0409-3356

Product Visual Gallery

This gallery contains 32 technical images submitted to the FDA as part of the official labeling for Hydromorphone Hydrochloride (NDC 0409-3356). Unlike standard consumer photos, these assets often include clinical data figures, molecular chemical structures, and official manufacturer packaging layouts.

As provided by Hospira, Inc., these visuals offer a comprehensive scientific overview of the product's physical and chemical identity, aiding pharmacists and researchers in product verification and study.

FDA Label Image

Chemical Structure (Hydromorphone 01)

Chemical structure of Hydromorphone Hydrochloride showing its molecular framework with labeled functional groups, including hydroxyl, carbonyl, and amine components along with the hydrochloride salt indicated.*

FDA Label Image

Logo (Hydromorphone 02)

FDA Label Image

Image (Hydromorphone 03)

An instructional illustration showing hands holding a vial and syringe, depicting correct preparation steps for drawing medication. A magnified inset highlights measurement markings on the syringe, emphasizing accuracy in dosage.*

FDA Label Image

Image (Hydromorphone 04)

An instructional illustration showing hands adjusting or activating a device attached to a syringe. The syringe contains a solution, likely Hydromorphone Hydrochloride, and the illustration emphasizes turning or unscrewing the device at the syringe tip.*

FDA Label Image

Image (Hydromorphone 05)

An instructional illustration showing a hand holding a vial with a syringe inserted into the top. A close-up inset highlights the vial stopper, which is labeled with a raised number "2" and the word "PUSH." This figure visually communicates how to access the vial's contents using a syringe.*

FDA Label Image

Image (Hydromorphone 06)

An instructional illustration depicting a person holding a syringe with one hand and using the other hand to rotate or pull back the plunger. The image demonstrates a step in preparing or using an injectable medication, likely related to Hydromorphone Hydrochloride.*

FDA Label Image

Image (Hydromorphone 07)

An instructional illustration showing a pair of gloved hands preparing to attach a needle to a prefilled syringe. The syringe contains a liquid medication, with a close-up circle highlighting the syringe tip connection where the needle will be attached.*

FDA Label Image

Image (Hydromorphone 08)

An instructional illustration showing a gloved hand holding a syringe with the plunger being pulled upward, indicated by a large arrow. The image likely demonstrates how to draw medication into the syringe but includes no text or specific product information.*

FDA Label Image

Image (Hydromorphone 09)

An instructional illustration showing the preparation of a syringe with Hydromorphone Hydrochloride injection. The image highlights the rotation of the syringe plunger to draw the medication, with an inset zooming in on the syringe barrel markings for accurate dosing. Hands are depicted holding and operating the syringe.*

FDA Label Image

Principal Display Panel (1 mg/mL Ampule Label)

Label for Hydromorphone Hydrochloride Injection, USP, 1 mg/mL in a 1 mL single-use ampul. The label indicates it is Rx only and includes manufacturer Hospira, Inc., Lake Forest, IL. The label also advises to protect the product from light.*

FDA Label Image

Principal Display Panel (1 mg/mL Ampule Box)

Carton packaging label for Hydromorphone Hydrochloride Injection, USP 1 mg/mL by Hospira, Inc. It contains 1 mL single-use ampuls, 10 per carton. The label states the product is for intravenous, intramuscular, or subcutaneous use, includes storage instructions to protect from light and keep at controlled room temperature, and features the NDC 0409-2552-01 code and Hospira branding.*

FDA Label Image

Principal Display Panel (2 mg/mL Ampule Label)

Label for Hydromorphone Hydrochloride Injection, USP 2 mg/mL single-use ampul. The label indicates Rx only, with a volume of 1 mL per ampul. It is manufactured by Hospira, Inc., Lake Forest, IL. NDC 0409-3356-11 is displayed along with a lot number and a note to protect from light.*

FDA Label Image

Principal Display Panel (2 mg/mL Ampule Box)

Packaging label for Hydromorphone HCl Injection, USP 2 mg/mL, 1 mL single-use ampuls, containing 10 ampuls per carton. The label indicates use for intravenous, intramuscular, or subcutaneous administration and lists storage instructions. The labeler is Hospira, Inc., and the NDC is 0409-3356-01.*

FDA Label Image

Principal Display Panel (4 mg/mL Ampule Label)

Label of Hydromorphone Hydrochloride Injection, USP 4 mg/mL in a 1 mL single-use ampul. The label includes dosage strength, drug name, and manufacturer Hospira, Inc., Lake Forest, IL. It also indicates 'Rx only' and includes storage instructions to protect from light.*

FDA Label Image

Principal Display Panel (4 mg/mL Ampule Box)

Packaging label for Hydromorphone HCl Injection, USP 4 mg/mL, 1 mL single-use ampuls, with 10 ampuls per package. The label includes administration information indicating use for intravenous, intramuscular, or subcutaneous injection. It features storage instructions, warnings to protect from light, and the Hospira, Inc. logo and name. The label also shows the NDC 0409-2540-01 and Rx only designation.*

FDA Label Image

Principal Display Panel (2 mg/mL Vial Label)

Label for Hydromorphone Hydrochloride Injection, USP, 2 mg/mL in a 1 mL single-dose vial. The label indicates it is Rx only and includes storage instructions to protect from light. Distributed by Hospira, Inc., Lake Forest, IL. The label features the NDC number, lot/expiration placeholders, and the Hospira logo.*

FDA Label Image

Principal Display Panel (2 mg/mL Vial Tray)

Box label for Hydromorphone Hydrochloride Injection, USP 2 mg/mL, distributed by Hospira, Inc. The packaging indicates 1 mL single-dose vials with 25 vials per carton, intended for intravenous, intramuscular, or subcutaneous use. The label includes storage instructions and a barcode.*

FDA Label Image

Principal Display Panel (1 mg/mL Cartridge Label)

Label for Hydromorphone Hydrochloride Injection USP 1 mg/mL in a 1 mL single-dose cartridge with Luer lock. The label states it is sterile, for RX only, and distributed by Hospira, Inc. It includes volume markings, lot and expiration date fields, and a note to protect from light.*

FDA Label Image

Principal Display Panel (1 mg/mL Cartridge Carton)

Packaging label for Hydromorphone Hydrochloride Injection, USP 1 mg/mL single-dose sterile cartridge units. The label states 10 Carpuject sterile cartridge units with Luer Lock, distributed by Hospira, Inc. It is indicated for intravenous, intramuscular, or subcutaneous use. The label details storage instructions and cautions including protection from light.*

FDA Label Image

Principal Display Panel (1 mg/mL Syringe Label)

Hydromorphone Hydrochloride 1 mg/mL injection single-dose vial label by Hospira, Inc. The label includes a volume scale marked at 0.5 mL and 1 mL, an NDC number 0409-1283-09, and placeholders for lot and expiration information. It also has warnings such as Protect From Light and indicates Rx only.*

FDA Label Image

Principal Display Panel (1 mg/mL Syringe Label)

Label for Hydromorphone Hydrochloride Injection, USP 1 mg/mL in a 1 mL single-dose syringe with Luer Lock. The product is distributed by Hospira, Inc. The label includes storage instructions to protect from light and displays a barcode and lot/expiration date fields.*

FDA Label Image

Principal Display Panel (1 mg/mL Syringe Carton)

Packaging label for Hydromorphone HCl Injection USP 1 mg/mL in a box containing 10 single-dose prefilled syringes with Luer Lock. The label indicates the product is for intravenous, intramuscular, or subcutaneous use. The labeler is Hospira, Inc. The box includes storage instructions and a barcode.*

FDA Label Image

Principal Display Panel (0.5 mL Syringe Label)

Hydromorphone Hydrochloride 0.5 mg/0.5 mL injection vial label. The label includes the dosage strength, volume, NDC number 0409-1283-04, indicates single-dose use, and displays storage instructions to protect from light. The labeler is Hospira, Inc.*

FDA Label Image

Principal Display Panel (0.5 mL Syringe Label)

Label for Hydromorphone Hydrochloride Injection, USP 0.5 mg/0.5 mL in a 0.5 mL single-dose syringe with Luer Lock. The label includes proprietary iSecure Syringe branding, directions to protect from light, and distribution information by Hospira, Inc., Lake Forest, IL. It also features a barcode, lot, and expiration date placeholders and a twist-to-open safety strip.*

FDA Label Image

Principal Display Panel (0.5 mL Syringe Carton)

Hydromorphone Hydrochloride Injection, USP 0.5 mg/0.5 mL in a box design for 10 single-dose prefilled syringes with Luer Lock by Hospira, Inc. The packaging includes directions for intravenous, intramuscular, or subcutaneous use and features the Hospira logo. The label also states storage conditions and warns to protect from light.*

FDA Label Image

Principal Display Panel (2 mg/mL Cartridge Label)

Label for Hydromorphone Hydrochloride Injection, USP 2 mg/mL, a sterile single-dose cartridge unit with Luer Lock. The label includes volume markings from 0.5 mL to 2 mL, the NDC code 0409-1312-03, and states it is distributed by Hospira, Inc., Lake Forest, IL. There are lot and expiration date placeholders and a barcode present.*

FDA Label Image

Principal Display Panel (2 mg/mL Cartridge Carton)

Carton label for Hydromorphone Hydrochloride Injection, USP 2 mg/mL by Hospira, Inc. This package contains 10 single-dose Carpuject sterile cartridge units with Luer Lock, designed for intravenous, intramuscular, or subcutaneous use. The label includes storage instructions, usage warnings, and distributor information for Hospira, Inc.*

FDA Label Image

Principal Display Panel (2 mg/mL Syringe Label)

Label for Hydromorphone Hydrochloride Injection, USP 2 mg/mL by Hospira, Inc. The label indicates 1 mL single-dose vial with NDC 0409-1312-09, Rx only. It includes a barcode, lot number, and expiration date fields. The label also instructs to protect from light.*

FDA Label Image

Principal Display Panel (2 mg/mL Syringe Label)

Label for Hydromorphone Hydrochloride Injection, USP 2 mg/mL in a 1 mL single-dose syringe with Luer Lock. The label indicates the product is distributed by Hospira, Inc., Lake Forest, IL, and includes warnings to protect from light and instructions to twist to open. The label also displays the NDC 0409-1312-09 and a lot and expiration date section.*

FDA Label Image

Principal Display Panel (2 mg/mL Syringe Carton)

Carton label for Hydromorphone Hydrochloride Injection, USP 2 mg/mL in single-dose prefilled syringes with Luer Lock. The package contains 10 syringes of 1 mL each. Labeler is Hospira, Inc. Indications for intravenous, intramuscular, or subcutaneous use are mentioned. The label includes storage instructions and a barcode.*

FDA Label Image

Principal Display Panel (4 mg/mL Cartridge Label)

Label for Hydromorphone Hydrochloride Injection, USP 4 mg/mL in a 1 mL single-dose Sterile Cartridge Unit with Luer Lock by Hospira, Inc. The label includes dosing marks up to 2 mL, barcode, lot number, and expiration date fields, and warnings to protect from light.*

FDA Label Image

Principal Display Panel (4 mg/mL Cartridge Carton)

Packaging label for Hydromorphone Hydrochloride Injection, USP 4 mg/mL by Hospira, Inc. The label indicates a 1 mL single-dose package containing 10 Carpuject sterile cartridge units with Luer Lock. Information includes administration routes (intravenous, intramuscular, subcutaneous), storage instructions, and warnings. The label features a tamper detection package marked Slim-Pak.*

* About these descriptions: Image descriptions on this page are generated by automated AI analysis of the product label images from the manufacturer's FDA label submission (SPL). They are provided for reference only and may contain errors or omissions. Always rely on the printed label itself and the official FDA labeling, and consult a pharmacist or healthcare professional with any questions about this product.