Product Images Dianeal Low Calcium With Dextrose

Dextrose Hydrous is a USP grade product also known as (0-Glucopyranose monohydrate) that is commonly used as an excipient in the pharmaceutical industry. Unfortunately, the provided text is not sufficient to give a detailed description.*

The text describes a peritoneal dialysis solution called Dianeal PD-2 with 1.5% dextrose. It contains several ingredients including sodium chloride, calcium chloride, magnesium chloride, and sodium lactate. The solution is sterile and non-pyrogenic and should only be administered intraperitoneally under the direction of a physician. The package insert should be consulted for dosage information. The inner bag should be squeezed and inspected for leaks before use. The solution should only be used if it is clear, and any unused portion should be discarded. The product should be stored at room temperature until ready to use and protected from excessive heat. Baxter Healthcare Corporation is the manufacturer of the product.*

This is a description of the composition, instructions, and cautions regarding Baxter Dianeal PD-2, which is a peritoneal dialysis solution with 2.5% Dextrose, primarily used for intraperitoneal administration. The solution comes in 100ml containers and contains Dextrose, Sodium Chloride, Sodium Lactate, Calcium Chloride, and Magnesium Chloride among other things. It is important to only add Potassium Chloride under the direction of a physician and to properly inspect the container before use. If any leaks are found, the product should be discarded. It is also important to avoid excessive heat and store the solution in a moisture barrier overwrap until ready to use. The product is marked with the trademarks of Baxter International Inc and was made in the USA.*

This is a description of a solution used for Peritoneal Dialysis. The solution is called Dianeal PD-2 with 4.25%Dextrose and comes in a 3000ml container. It contains dextrose, sodium chloride, sodium lactate, calcium chloride, and magnesium chloride, with a pH of 5.2. The solution is sterile, nonpyrogenic, and can only be used for intraperitoneal administration under the direction of a physician. Caution should be exercised when using the solution, and unused portions must be discarded. Baxter Healthcare Corporation manufactures it, and it is made in the USA.*

This is a description of a medical product, which is a peritoneal dialysis solution used in the treatment of kidney failure. The product is called Baxter Dianeal Low Calcium and comes in a 100 ml container containing dextrose, sodium chloride, sodium lactate, calcium chloride, and magnesium chloride. The solution is sterile and nonpyrogenic, has a pH of 5.2, and has an osmolarity of 341 mOsmolL. It is indicated for intraperitoneal administration only and caution is advised when using it. The package insert should be reviewed for dosage information, and unused portions should be discarded properly. The product should be stored in a moisture barrier overwrap at room temperature and monitored for excessive heat. The product is manufactured by Baxter Healthcare Corporation, based in Illinois, USA.*

This is a description of a medical solution for peritoneal dialysis. The solution is called Dianeal and contains 2.5% dextrose, sodium chloride, sodium lactate, calcium chloride, and magnesium chloride. The solution is supplied in a 3000 mL container and contains excess up to 80 mL. The solution is stored at room temperature and should be used to the direction of the physician. There are instructions for addition of potassium chloride and cautions to discard unused portion after inspection of the inner bag to maintain sterility. The container is produced by Baxter, and Ambu-Flex Il is a plastic bag used for the container.*

This is a description of Baxter Dianeal Low Calcium Peritoneal Dialysis Solution with 4.25% Dextrose. The solution comes in a 3000 mL container, containing approximately 80 mL excess. Each 100 mL of the solution contains 4.25 g of dextrose hydrous USP, 538 mg of sodium chloride USP, 448 mg of sodium lactate, 18.3 mg of calcium chloride USP, and 5.08 mg of magnesium chloride USP, with a pH of 5.2. The osmolarity is 483 mOsmol/L. It is a sterile, nonpyrogenic solution for intraperitoneal administration only. There are certain cautions to be kept in mind while using this solution, such as squeezing and inspecting the inner bag for any leaks before use, and discarding unused portions. It should only be used under the direction of a physician. It is stored in a moisture barrier overwrap at room temperature.*

This is a description of a dialysis solution called Dianeal PD-2 made by the company Baxter. The solution is used for peritoneal dialysis and contains 1.5% dextrose, sodium chloride, sodium lactate, calcium chloride, and magnesium chloride. The solution is sterile and non-pyrogenic and must be used under the direction of a physician. The bag containing the solution must be inspected for leaks before use, and any unused portion should be discarded. The solution must be stored at room temperature until ready to use, and excessive heat should be avoided. The container for the solution is made of plastic and is trademarked by Baxter. The solution is made in the USA.*

This is a description of Baxter Dianeal PD-2 Peritoneal Dialysis Solution with 2.5% Dextrose. The solution contains dextrose, sodium chloride, sodium lactate, calcium chloride, and magnesium chloride. This solution is sterile and non-pyrogenic, and potassium chloride should only be added under the direction of a physician. This solution is for intraperitoneal administration only and should be dosed as directed by a physician. The unit should be stored in moisture barrier overwrap at room temperature until ready to use.*

This is a description of a pharmaceutical solution for intraperitoneal administration called "Dianeal PD-2 Peritoneal Dialysis Solution with 4.25% Dextrose" manufactured by Baxter. The solution contains 425 g Dextrose Hydrous USP, 53 mg Sodium Chloride USP, 442 mg Sodium Lactate, 257 mg Calcium Chloride USP, and 0.8 mg Magnesium Chloride USP. The total osmolarity is 485 mosmal L (Calc). The package insert must be read for full information, and the solution must only be used as directed by a physician. Caution is advised while squeezing and inspecting the inner bag which maintains product sterility; it should be discarded if leaks are detected. The unit should not be used if the solution is not clear, and the unused portion of the solution should be discarded. It must be stored at room temperature and protected from excessive heat. The package insert carries a warning that extensive use of this solution during a single peritoneal dialysis procedure can remove significant amounts of water from the patient, and the solution is recommended for intraperitoneal administration only. Unfortunately, the text does not provide any context or further explanation.*

This is a description of a Peritoneal Dialysis Solution from Baxter that should be administered under the direction of a physician. The solution comes in a 100mL container and contains 1.5% Dextrose, 538 mg sodium chloride, 448 mg sodium lactate, 183 mg calcium chloride, and 5.08 mg magnesium chloride. It is low in calcium with only 2.5 mEqg/L, and has a pH of 5.2. The package insert should be read for full information. The solution is sterile, non-pyrogenic, and should only be used for intraperitoneal administration. It should be stored in a moisture barrier overwrap at room temperature until ready to use. This solution should be used cautiously and only as directed by a physician.*

This is a medical intraperitoneal dialysis solution of Baxter's brand, called Dianeal Low Calcium. Its composition includes 2.5% Dextrose, Sodium Chloride, Sodium Lactate, Calcium Chloride, and Magnesium Chloride. It is sterile, nonpyrogenic, and should be stored at room temperature until ready to use. The dosage must be administered as directed by a physician. The package insert should be thoroughly read for more information. The solution comes in UltraBag containers made of PL 146 plastic.*

This is a product description for Baxter's Dianeal Low Calcium Peritoneal Dialysis Solution. The solution comes in a 100 mL container and contains 4.25 g of dextrose, 538 mg of sodium chloride, 448 mg of sodium lactate, 16.3 mg of calcium chloride, and 5.08 mg of magnesium chloride. The product is sterile and nonpyrogenic and should only be used for intraperitoneal administration as directed by a physician. Caution should be exercised when using this product, as excessive use can result in water removal from the patient during one peritoneal dialysis procedure. The bag should be inspected for leaks and discarded if any are found. The product should not be used if the solution is not clear, and any unused portion should be discarded. The product should be stored at room temperature until ready to use, and the insert should be consulted for full information. The manufacturer is Baxter Healthcare Corporation, and the product is made in the USA.*

This is a product description for Baxter's Dianeal Low Calcium Peritoneal Dialysis Solution with 1.5% Dextrose. The solution has a net volume of 5000mL and an NDC number of 0941-0484-01. It is intended for intraperitoneal administration only and must be stored at room temperature and protected from moisture. The solution contains 2.5 mEg/L of calcium and 1.5% dextrose. The package contains dosage information and cautions about inspecting the product for sterility, discarding leaks and used portions, and not using the solution if it is discolored. Lastly, Baxter and Dianeal are both trademarks of Baxter International.*

This is a description of a medical solution for peritoneal dialysis. The text provides the brand names of the product, Baxter and Dianeal, and information about the solution itself, such as its low calcium content and its 2.5% dextrose concentration. The text also includes details about how the solution should be used, such as cautioning to inspect the container, discarding any unused portion, and storing it in a certain temperature range. There is a warning to only add potassium under the direction of a medical professional.*

This is a description of a peritoneal dialysis solution manufactured by Baxter called Dianeal. The product is intended for intraperitoneal administration only and caution must be taken to ensure sterility. The solution comes in a 100 mL container and contains 4.25% dextrose and low calcium (2.5 mEq/L). It is important to check the inner bag for leaks and to discard any unused portion of the solution. The product is nonpyrogenic and must be stored at room temperature until ready for use. The text also includes the product's OMR or barcode number.*