NDC 0990-7077 Potassium Chloride

Potassium Chloride

NDC Product Code 0990-7077

NDC Product Information

Potassium Chloride with NDC 0990-7077 is a a human prescription drug product labeled by Icu Medical Inc.. The generic name of Potassium Chloride is potassium chloride. The product's dosage form is injection, solution and is administered via intravenous form.

Labeler Name: Icu Medical Inc.

Dosage Form: Injection, Solution - A liquid preparation containing one or more drug substances dissolved in a suitable solvent or mixture of mutually miscible solvents that is suitable for injection.

Product Type: Human Prescription Drug Additional informationCallout TooltipWhat kind of product is this?
Indicates the type of product, such as Human Prescription Drug or Human Over the Counter Drug. This data element matches the “Document Type” field of the Structured Product Listing.

Potassium Chloride Active Ingredient(s)

Additional informationCallout TooltipWhat is the Active Ingredient(s) List?
This is the active ingredient list. Each ingredient name is the preferred term of the UNII code submitted.

  • POTASSIUM CHLORIDE 400 meq/1000mL

Inactive Ingredient(s)

Additional informationCallout TooltipAbout the Inactive Ingredient(s)
The inactive ingredients are all the component of a medicinal product OTHER than the active ingredient(s). The acronym "UNII" stands for “Unique Ingredient Identifier” and is used to identify each inactive ingredient present in a product.

  • WATER (UNII: 059QF0KO0R)
  • WATER (UNII: 059QF0KO0R)
  • WATER (UNII: 059QF0KO0R)

Administration Route(s)

Additional informationCallout TooltipWhat are the Administration Route(s)?
The translation of the route code submitted by the firm, indicating route of administration.

  • Intravenous - Administration within or into a vein or veins.

Pharmacological Class(es)

Additional informationCallout TooltipWhat is a Pharmacological Class?
These are the reported pharmacological class categories corresponding to the SubstanceNames listed above.

  • Potassium Compounds - [CS]
  • Potassium Salt - [EPC] (Established Pharmacologic Class)
  • Osmotic Laxative - [EPC] (Established Pharmacologic Class)
  • Increased Large Intestinal Motility - [PE] (Physiologic Effect)
  • Inhibition Large Intestine Fluid/Electrolyte Absorption - [PE] (Physiologic Effect)
  • Osmotic Activity - [MoA] (Mechanism of Action)

Product Labeler Information

Additional informationCallout TooltipWhat is the Labeler Name?
Name of Company corresponding to the labeler code segment of the Product NDC.

Labeler Name: Icu Medical Inc.
Labeler Code: 0990
FDA Application Number: NDA020161 Additional informationCallout TooltipWhat is the FDA Application Number?
This corresponds to the NDA, ANDA, or BLA number reported by the labeler for products which have the corresponding Marketing Category designated. If the designated Marketing Category is OTC Monograph Final or OTC Monograph Not Final, then the Application number will be the CFR citation corresponding to the appropriate Monograph (e.g. “part 341”). For unapproved drugs, this field will be null.

Marketing Category: NDA - A product marketed under an approved New Drug Application. Additional informationCallout TooltipWhat is the Marketing Category?
Product types are broken down into several potential Marketing Categories, such as NDA/ANDA/BLA, OTC Monograph, or Unapproved Drug. One and only one Marketing Category may be chosen for a product, not all marketing categories are available to all product types. Currently, only final marketed product categories are included. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.

Start Marketing Date: 04-01-2019 Additional informationCallout TooltipWhat is the Start Marketing Date?
This is the date that the labeler indicates was the start of its marketing of the drug product.

Listing Expiration Date: 12-31-2020 Additional informationCallout TooltipWhat is the Listing Expiration Date?
This is the date when the listing record will expire if not updated or certified by the product labeler.

Exclude Flag: N Additional informationCallout TooltipWhat is the NDC Exclude Flag?
This field indicates whether the product has been removed/excluded from the NDC Directory for failure to respond to FDA’s requests for correction to deficient or non-compliant submissions. Values = ‘Y’ or ‘N’.

* Please review the disclaimer below.

Potassium Chloride Product Label Images

Potassium Chloride Product Labeling Information

The product labeling information includes all published material associated to a drug. Product labeling documents include information like generic names, active ingredients, ingredient strength dosage, routes of administration, appearance, usage, warnings, inactive ingredients, etc.

Product Labeling Index


This Potassium Chloride Injection is a sterile, nonpyrogenic, highly concentrated, ready-to-use solution of Potassium Chloride, USP in Water for Injection, USP for electrolyte replenishment in a single dose container for intravenous administration. It contains no antimicrobial agents. PotassiumChlorideInjection mEq Potassium/ ContainerComposition(g/L)PotassiumChloride, USP(KCl)Osmolarity*(mOsmol/L)(calc)pHIonic Concentration(mEq/L)PotassiumChloride10 mEq/100 mL7.452005.8(4.0 to 8.0)10010010 mEq/50 mL 20 mEq/100 mL 14.94005.8(4.0 to 8.0)20020020 mEq/50 mL 40 mEq/100 mL 29.87995.8(4.0 to 8.0)400400 *Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Administration of substantially hypertonic solutions (≥600 mOsmol/L) may cause vein damage. This flexible plastic container is fabricated from a specially formulated polyvinylchloride. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain of its chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials.

Clinical Pharmacology

Potassium is the major cation of body cells (160 mEq/liter of intracellular water) and is concerned with the maintenance of body fluid composition and electrolyte balance. Potassium participates in carbohydrate utilization, protein synthesis, and is critical in the regulation of nerve conduction and muscle contraction, particularly in the heart. Chloride, the major extracellular anion, closely follows the metabolism of sodium, and changes in the acid-base of the body are reflected by changes in the chloride concentration. Normally about 80 to 90% of the potassium intake is excreted in the urine, the remainder in the stools and to a small extent, in the perspiration. The kidney does not conserve potassium well so that during fasting, or in patients on a potassium-free diet, potassium loss from the body continues resulting in potassium depletion. A deficiency of either potassium or chloride will lead to a deficit of the other.

Indications And Usage

Potassium Chloride Injection is indicated in the treatment of potassium deficiency states when oral replacement is not feasible. THIS HIGHLY CONCENTRATED, READY-TO-USE POTASSIUM CHLORIDE INJECTION IS INTENDED FOR THE MAINTENANCE OF SERUM K + LEVELS AND FOR POTASSIUM SUPPLEMENTATION IN FLUID RESTRICTED PATIENTS WHO CANNOT ACCOMMODATE ADDITIONAL VOLUMES OF FLUID ASSOCIATED WITH POTASSIUM SOLUTIONS OF LOWER CONCENTRATION. When using these products, these patients should be on continuous cardiac monitoring and frequent testing for serum potassium concentration and acid-base balance.


Potassium Chloride Injection is contraindicated in diseases where high potassium levels may be encountered, and in patients with hyperkalemia, renal failure and in conditions in which potassium retention is present.


THIS HIGHLY CONCENTRATED, READY-TO-USE POTASSIUM CHLORIDE INJECTION IS INTENDED FOR THE MAINTENANCE OF SERUM K + LEVELS AND FOR POTASSIUM SUPPLEMENTATION IN FLUID RESTRICTED PATIENTS WHO CANNOT ACCOMMODATE ADDITIONAL VOLUMES OF FLUID ASSOCIATED WITH POTASSIUM SOLUTIONS OF LOWER CONCENTRATION. TO AVOID POTASSIUM INTOXICATION, DO NOT INFUSE THESE SOLUTIONS RAPIDLY. PATIENTS REQUIRING HIGHLY CONCENTRATED SOLUTIONS SHOULD BE KEPT ON CONTINUOUS CARDIAC MONITORING AND UNDERGO FREQUENT TESTING FOR SERUM POTASSIUM AND ACID-BASE BALANCE, ESPECIALLY IF THEY RECEIVE DIGITALIS. In patients with renal insufficiency, administration of potassium chloride may cause potassium intoxication and life-threatening hyperkalemia. Administer intravenously only with a calibrated infusion device at a slow, controlled rate. (See DOSAGE AND ADMINISTRATION.) Because pain associated with peripheral infusion of Potassium Chloride solution has been reported, whenever possible administration via a central route is recommended for thorough dilution by the blood stream and avoidance of extravasation. Highest concentrations (300 and 400 mEq/L) should be exclusively administered via central route. The administration of intravenous solutions can cause fluid and/or solute overload resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema. The risk of dilutional states is inversely proportional to the electrolyte concentration. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentration.

Laboratory Tests

Serum potassium levels are not necessarily indicative of tissue potassium levels. Solutions containing potassium should be used with caution in the presence of cardiac or renal disease. Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation. Significant deviations from normal concentrations may require the use of additional electrolyte supplements, or the use of electrolyte-free dextrose solutions to which individualized electrolyte supplements may be added.


Pregnancy Category C. Animal reproduction studies have not been conducted with potassium chloride. It is also not known whether potassium chloride can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Potassium chloride should be given to a pregnant woman only if clearly needed.

Pediatric Use:

These products should not be used in pediatric patients at this time. Do not administer unless solution is clear and seal is intact.

Adverse Reactions

Potassium intoxication with mild or severe hyperkalemia has been reported. The signs and symptoms of intoxication include paresthesia of the extremities, areflexia, muscular or respiratory paralysis, mental confusion, weakness, hypotension, cardiac arrhythmia, heart block, electrographic abnormalities and cardiac arrest. EKG abnormalities serve as a clinical reflection of the seriousness of changes in serum potassium concentrations: peaked T waves and prolonged P-R intervals usually occur with modest elevations above the upper limit of normal potassium concentrations; P waves disappear, the QRS complex widens, and eventual asystole usually occurs with higher elevations. Reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia. Infusion of highly concentrated potassium chloride solutions may cause local pain and vein irritation. (See WARNINGS). Reactions reported with the use of potassium-containing solutions include nausea, vomiting, and abdominal pain and diarrhea. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.


  • In the event of hyperkalemia, discontinue the infusion immediately and institute corrective therapy to reduce serum potassium levels as necessary. The use of potassium containing foods or medications must also be eliminated. Treatment of mild to severe hyperkalemia with signs and symptoms of potassium intoxication includes the following: Dextrose Injection, USP, 10% or 25%, containing 10 units of crystalline insulin per 20 grams of dextrose administered intravenously, 300 to 500 mL per hour. Absorption and exchange of potassium using sodium or ammonium cycle cation exchange resin, orally and as retention enema. Hemodialysis and peritoneal dialysis. In cases of digitalization, too rapid a lowering of plasma potassium concentration can cause digitalis toxicity.

Dosage And Administration

  • The dose and rate of administration are dependent upon the specific condition of each patient. Administer intravenously only with a calibrated infusion device at a slow, controlled rate. Because pain associated with peripheral infusion of Potassium Chloride solution has been reported, whenever possible, administration via central route is recommended for thorough dilution by the blood stream and avoidance of extravasation. Highest concentrations (300 and 400 mEq/L) should be exclusively administered via central route. Recommended administration rates should not usually exceed 10 mEq/hour or 200 mEq for a 24-hour period if the serum potassium level is greater than 2.5 mEq/liter. In urgent cases where the serum potassium level is less than 2 mEq/liter or where severe hypokalemia is a threat (serum potassium level less than 2 mEq/liter and electrocardiographic changes and/or muscle paralysis), rates up to 40 mEq/hour or 400 mEq over a 24-hour period can be administered very carefully when guided by continuous monitoring of the EKG and frequent serum K+ determinations to avoid hyperkalemia and cardiac arrest. Parenteral drug products should be inspected visually for particulate matter and discoloration, whenever solution and container permit. Use of a final filter is recommended during administration of all parenteral solutions where possible. Do not add supplementary medication.Preparation for Administration(Use aseptic technique)Close flow control clamp of administration set.Remove cover from outlet port at bottom of container. Insert piercing pin of administration set into port with a twisting motion until the set is firmly seated. NOTE: See full directions on administration set carton. Suspend container from hanger. Squeeze and release drip chamber to establish proper fluid level in chamber. Open flow control clamp and clear air from set. Close clamp. Attach set to venipuncture device. If device is not indwelling, prime and make venipuncture. Regulate rate of administration with flow control clamp. WARNING: Do not use flexible container in series connections. Do not add supplementary medication. Such use could result in air embolism due to residual air being drawn from the primary container before administration of the fluid from the secondary container is completed.

How Supplied

Potassium Chloride Injection in flexible plastic containers is available as follows: NDC No.Potassium per container 0409–7074–26 10 mEq/100 mL0990-7074-2610 mEq/100 mL0409–7075–1410 mEq/50 mL0990-7075-1410 mEq/50 mL0409–7075–2620 mEq/100 mL0990-7075-2620 mEq/100 mL0409–7077–1420 mEq/50 mL0990-7077-1420 mEq/50 mL0409–7077–2640 mEq/100 mL0990-7077-2640 mEq/100 mLICU Medical is transitioning NDC codes from "0409" to a "0990" labeler code. Both NDC codes are expected to be in the market for a period of time. Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature.] Revised: June, 2018EN-4654ICU Medical, Inc., Lake Forest, Illinois, 60045, USA

* Please review the disclaimer below.

Previous Code
Next Code