NDC 0990-7984 Sodium Chloride

Sodium Chloride

NDC Product Code 0990-7984

NDC 0990-7984-06

Package Description: 60 BAG in 1 CASE > 50 mL in 1 BAG

NDC 0990-7984-11

Package Description: 60 BAG in 1 CASE > 100 mL in 1 BAG

NDC 0990-7984-13

Package Description: 48 POUCH in 1 CASE > 1 BAG in 1 POUCH > 50 mL in 1 BAG

NDC 0990-7984-20

Package Description: 12 POUCH in 1 CASE > 4 BAG in 1 POUCH > 25 mL in 1 BAG

NDC 0990-7984-23

Package Description: 48 POUCH in 1 CASE > 1 BAG in 1 POUCH > 100 mL in 1 BAG

NDC 0990-7984-36

Package Description: 20 POUCH in 1 CASE > 4 BAG in 1 POUCH > 50 mL in 1 BAG

NDC 0990-7984-37

Package Description: 20 POUCH in 1 CASE > 4 BAG in 1 POUCH > 100 mL in 1 BAG

NDC Product Information

Sodium Chloride with NDC 0990-7984 is a a human prescription drug product labeled by Icu Medical Inc.. The generic name of Sodium Chloride is sodium chloride. The product's dosage form is injection, solution and is administered via intravenous form.

Labeler Name: Icu Medical Inc.

Dosage Form: Injection, Solution - A liquid preparation containing one or more drug substances dissolved in a suitable solvent or mixture of mutually miscible solvents that is suitable for injection.

Product Type: Human Prescription Drug What kind of product is this?
Indicates the type of product, such as Human Prescription Drug or Human Over the Counter Drug. This data element matches the “Document Type” field of the Structured Product Listing.

Sodium Chloride Active Ingredient(s)

What is the Active Ingredient(s) List?
This is the active ingredient list. Each ingredient name is the preferred term of the UNII code submitted.

  • SODIUM CHLORIDE 900 mg/100mL
  • SODIUM CHLORIDE 900 mg/100mL

Inactive Ingredient(s)

About the Inactive Ingredient(s)
The inactive ingredients are all the component of a medicinal product OTHER than the active ingredient(s). The acronym "UNII" stands for “Unique Ingredient Identifier” and is used to identify each inactive ingredient present in a product.

  • WATER (UNII: 059QF0KO0R)
  • WATER (UNII: 059QF0KO0R)
  • WATER (UNII: 059QF0KO0R)

Administration Route(s)

What are the Administration Route(s)?
The translation of the route code submitted by the firm, indicating route of administration.

  • Intravenous - Administration within or into a vein or veins.
  • Intravenous - Administration within or into a vein or veins.

Pharmacological Class(es)

What is a Pharmacological Class?
These are the reported pharmacological class categories corresponding to the SubstanceNames listed above.

  • Osmotic Laxative - [EPC] (Established Pharmacologic Class)
  • Increased Large Intestinal Motility - [PE] (Physiologic Effect)
  • Inhibition Large Intestine Fluid/Electrolyte Absorption - [PE] (Physiologic Effect)
  • Osmotic Activity - [MoA] (Mechanism of Action)
  • Osmotic Laxative - [EPC] (Established Pharmacologic Class)
  • Increased Large Intestinal Motility - [PE] (Physiologic Effect)
  • Inhibition Large Intestine Fluid/Electrolyte Absorption - [PE] (Physiologic Effect)
  • Osmotic Activity - [MoA] (Mechanism of Action)

Product Labeler Information

What is the Labeler Name?
Name of Company corresponding to the labeler code segment of the Product NDC.

Labeler Name: Icu Medical Inc.
Labeler Code: 0990
FDA Application Number: NDA016366 What is the FDA Application Number?
This corresponds to the NDA, ANDA, or BLA number reported by the labeler for products which have the corresponding Marketing Category designated. If the designated Marketing Category is OTC Monograph Final or OTC Monograph Not Final, then the Application number will be the CFR citation corresponding to the appropriate Monograph (e.g. “part 341”). For unapproved drugs, this field will be null.

Marketing Category: NDA - A product marketed under an approved New Drug Application. What is the Marketing Category?
Product types are broken down into several potential Marketing Categories, such as NDA/ANDA/BLA, OTC Monograph, or Unapproved Drug. One and only one Marketing Category may be chosen for a product, not all marketing categories are available to all product types. Currently, only final marketed product categories are included. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.

Start Marketing Date: 08-15-2019 What is the Start Marketing Date?
This is the date that the labeler indicates was the start of its marketing of the drug product.

Listing Expiration Date: 12-31-2020 What is the Listing Expiration Date?
This is the date when the listing record will expire if not updated or certified by the product labeler.

Exclude Flag: N What is the NDC Exclude Flag?
This field indicates whether the product has been removed/excluded from the NDC Directory for failure to respond to FDA’s requests for correction to deficient or non-compliant submissions. Values = ‘Y’ or ‘N’.

* Please review the disclaimer below.

Sodium Chloride Product Labeling Information

The product labeling information includes all published material associated to a drug. Product labeling documents include information like generic names, active ingredients, ingredient strength dosage, routes of administration, appearance, usage, warnings, inactive ingredients, etc.

Product Labeling Index

Other

Flexible Plastic Container                                                                                                               Rx only

Description

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration.For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.).For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.).The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers.The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded.The solutions are parenteral fluid and electrolyte replenishers.Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water.Water for Injection, USP is chemically designated H2O.The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

Clinical Pharmacology

When administered intravenously, these solutions provide a source of water and electrolytes.Solutions which provide combinations of hypotonic or isotonic concentrations of sodium chloride are suitable for parenteral maintenance or replacement of water and electrolyte requirements.Isotonic concentrations of sodium chloride are suitable for parenteral replacement of chloride losses that exceed or equal the sodium loss. Hypotonic concentrations of sodium chloride are suited for parenteral maintenance of water requirements when only small quantities of salt are desired. A hypertonic concentration of sodium chloride may be used to repair severe salt depletion syndrome. Sodium chloride in water dissociates to provide sodium (Na+) and chloride (Cl−) ions. Sodium (Na+) is the principal cation of the extracellular fluid and plays a large part in the therapy of fluid and electrolyte disturbances. Chloride (Cl−) has an integral role in buffering action when oxygen and carbon dioxide exchange occurs in the red blood cells. The distribution and excretion of sodium (Na+) and chloride (Cl−) are largely under the control of the kidney which maintains a balance between intake and output.Water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. Average normal adult daily requirements range from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production).Water balance is maintained by various regulatory mechanisms. Water distribution depends primarily on the concentration of electrolytes in the body compartments and sodium (Na+) plays a major role in maintaining physiologic equilibrium.

Indications And Usage

Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.

Contraindications

None known.

Warnings

Sodium Chloride Injection, USP should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency and in clinical states in which there exists edema with sodium retention.The intravenous administration of Sodium Chloride Injection, USP can cause fluid and/or solute overloading resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema.The risk of dilutive states is inversely proportional to the electrolyte concentration of the injections. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentrations of the injections.In patients with diminished renal function, administration of Sodium Chloride Injection, USP may result in sodium retention.

Precautions

GeneralDo not use plastic containers in series connections. Such use could result in air embolism due to residual air being drawn from the primary container before administration of the fluid from the secondary container is completed.Pressurizing intravenous solutions contained in flexible plastic containers to increase flow rates can result in air embolism if the residual air in the container is not fully evacuated prior to administration.Use of a vented intravenous administration set with the vent in the open position could result in air embolism. Vented intravenous administration sets with the vent in the open position should not be used with flexible plastic containers.Laboratory TestsClinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation.

Drug Interactions

Caution must be exercised in the administration of Sodium Chloride Injection, USP to patients receiving corticosteroids or corticotropin.Carcinogenesis, Mutagenesis, Impairment of Fertility Studies have not been performed with Sodium Chloride Injection, USP to evaluate the potential for carcinogenesis, mutagenesis or impairment of fertility.Pregnancy: Teratogenic EffectsPregnancy Category C Animal reproduction studies have not been conducted with Sodium Chloride Injection, USP. It is also not known whether Sodium Chloride Injection, USP can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Sodium Chloride Injection, USP should be given to a pregnant woman only if clearly needed.Labor and DeliveryStudies have not been conducted to evaluate the effects of Sodium Chloride Injection, USP on labor and delivery. Caution should be exercised when administering this drug during labor and delivery.Nursing Mothers It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when Sodium Chloride Injection, USP is administered to a nursing mother.Pediatric Use The use of Sodium Chloride Injection, USP in pediatric patients is based on clinical practice.Plasma electrolyte concentrations should be closely monitored in the pediatric population as this population may have impaired ability to regulate fluids and electrolytes.The infusion of hypotonic fluids (0.45% Sodium Chloride Injection, USP) together with the non-osmotic secretion of ADH may result in hyponatremia in patients with acute volume depletion. Hyponatremia can lead to headache, nausea, seizures, lethargy, coma, cerebral edema and death, therefore acute symptomatic hyponatremic encephalopathy is considered a medical emergency.Geriatric Use Clinical studies of Sodium Chloride Injection, USP did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects. Other reported clinical experience has not identified differences in responses between elderly and younger patients. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or drug therapy.This drug is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function.Do not administer unless solution is clear and container is undamaged. Discard unused portion.

Adverse Reactions

Reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia.If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.In addition to the above listed adverse reactions hyponatremia has been reported for 0.45% Sodium Chloride Injection, USP (see Pediatric Use section).

Overdosage

In the event of overhydration or solute overload, re-evaluate the patient and institute appropriate corrective measures. (See WARNINGS, PRECAUTIONS, and ADVERSE REACTIONS.)

Dosage And Administration

The dose is dependent upon the age, weight and clinical condition of the patient.Additives may be incompatible. Consult with pharmacist, if available. When introducing additives, use aseptic technique, mix thoroughly and do not store.Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. (See PRECAUTIONS.)

Instructions For Use

  • To OpenTear outer wrap at notch and remove solution container. If supplemental medication is desired, follow directions below before preparing for administration. Some opacity of the plastic due to moisture absorption during the sterilization process may be observed. This is normal and does not affect the solution quality or safety. The opacity will diminish gradually.To Add Medication1.Prepare additive port. 2.Using aseptic technique and an additive delivery needle of appropriate length, puncture resealable additive port at target area, inner diaphragm and inject. Withdraw needle after injecting medication.3.The additive port may be protected by covering with an additive cap.4.Mix container contents thoroughly.Preparation for Administration(Use aseptic technique)1.Close flow control clamp of administration set.2.Remove cover from outlet port at bottom of container.3.Insert piercing pin of administration set into port with a twisting motion until the set is firmly seated. NOTE: See full directions on administration set carton.4.Suspend container from hanger.5.Squeeze and release drip chamber to establish proper fluid level in chamber.6.Open flow control clamp and clear air from set. Close clamp.7.Attach set to venipuncture device. If device is not indwelling, prime and make venipuncture.8.Regulate rate of administration with flow control clamp.WARNING: Do not use flexible container in series connections.

How Supplied

Sodium Chloride Injection, USP is supplied in single-dose flexible plastic containers in various sizes and concentrations as shown in the accompanying Table.NDC No.ProductContainer size mL0409-7730-36Manufactured by ICU Medical, Inc., Lake Forest, Illinois, 60045, USA0.45% Sodium Chloride Inj., USP500990-7730-360.45% Sodium Chloride Inj., USP500409-7730-370.45% Sodium Chloride Inj., USP1000990-7730-370.45% Sodium Chloride Inj., USP1000409-7985-020.45% Sodium Chloride Inj., USP2500990-7985-020.45% Sodium Chloride Inj., USP2500409-7985-03Manufactured for ICU Medical, Inc., Lake Forest, Illinois, 60045, USA0.45% Sodium Chloride Inj., USP5000990-7985-030.45% Sodium Chloride Inj., USP5000409-7985-09,0.45% Sodium Chloride Inj., USP10000990-7985-09,0.45% Sodium Chloride Inj., USP10000409-7984-200.9% Sodium Chloride Inj., USP250990-7984-200.9% Sodium Chloride Inj., USP250409-7984-360.9% Sodium Chloride Inj., USP500990-7984-360.9% Sodium Chloride Inj., USP500409-7984-130.9% Sodium Chloride Inj., USP500990-7984-130.9% Sodium Chloride Inj., USP500409-7984-370.9% Sodium Chloride Inj., USP1000990-7984-370.9% Sodium Chloride Inj., USP1000409-7984-230.9% Sodium Chloride Inj., USP1000990-7984-230.9% Sodium Chloride Inj., USP1000409-7983-610.9% Sodium Chloride Inj., USP1500990-7983-610.9% Sodium Chloride Inj., USP1500409-7983-02,0.9% Sodium Chloride Inj., USP2500990-7983-02,0.9% Sodium Chloride Inj., USP2500409-7983-530.9% Sodium Chloride Inj., USP2500990-7983-530.9% Sodium Chloride Inj., USP2500409-7983-030.9% Sodium Chloride Inj., USP5000990-7983-030.9% Sodium Chloride Inj., USP5000409-7983-550.9% Sodium Chloride Inj., USP5000990-7983-550.9% Sodium Chloride Inj., USP5000409-7983-09,0.9% Sodium Chloride Inj., USP10000990-7983-09,0.9% Sodium Chloride Inj., USP1000ICU Medical is transitioning NDC codes from "0409" to "0990" labeler code. Both NDC codes are expected to be in the market for a period of time.Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature.] Protect from freezing.Revised: 1/2018EN-4686

* Please review the disclaimer below.