Cyclophosphamide Intalere Choice Representative Container Lbl 10019-935-25 (Image 02)
Container LabelNDC 10019-935-25
Cyclophosphamide
for Injection, USP
500 mg/vial
CYTOTOXIC AGENT
FOR SINGLE DOSE USE
STERILE, NON-PYROGENIC
FOR PARENTERAL USE
Rx only
460-629-01
INTALERE CHOICE Logo
Manufactured for Intalere Choice
by Baxter Healthcare Corporation Deerfield, IL 60015 USA
Made in Germany
Each vial contains 500 mg cyclophosphamide.
For IV Infusion Use: Add 25 mL
Sterile Water for Injection, USP, and shake
vigorously to dissolve the drug.
For Direct Injection Use: Add 25 mL
0.9% Sodium Chloride Injection, USP, and
shake vigorously to dissolve the drug.
See insert for indications and dosage
schedule. Store vial at or below 25°C (77°F)
[see USP Controlled Room Temperature].
Bar Code
(01)00310019935256
USA HA-65-01-631 C767
LOT/EXP:
Representative Cyclophosphamide Intalere Ndc 10019-935-01 Panel 1 (Image 03)
Z:\ni\sgl_spl_2018\cyclophosphamide Anda 040745 Intalere Pkging Update Vv 06042018\ha-80-02-316_panel 2.jpgrepresentative Cyclophosphamide Intalere Ndc 10019-935-01 Panel 2 (Image 04)
Carton LabelNDC 10019-935-01
Cyclophosphamide
for Injection, USP
500 mg/vial
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
Cyclophosphamide
for Injection, USP
500 mg/vial
Barcode
HA-80-02-136
USA
Each vial contains 500 mg cyclophosphamide.
For IV Infusion Use:
Add 25 mL Sterile Water for Injection,
USP, and shake vigorously to dissolve
the drug.
For Direct Injection Use: Add 25 mL
0.9% Sodium Chloride Injection, USP,
and shake vigorously to dissolve
the drug.
Store vial at or below 25°C (77°F)
[see USP Controlled Room Temperature].
DOSAGE: See accompanying literature
for directions for use. Should not be
prescribed without thorough knowledge
of dose, indications and toxicity as
contained in accompanying literature.
CYTOTOXIC AGENT
FOR SINGLE DOSE USE
STERILE, NON-PYROGENIC
FOR PARENTERAL USE
C
632
NDC 10019-935-01
Cyclophosphamide
for Injection, USP
500 mg/vial
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
LOT/EXP:
263B5148
Bar Code
NDC 10019-935-01
Cyclophosphamide
for Injection, USP
500 mg
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
Cyclophosphamide Intalere Choice Representative Container Lbl 10019-936-60 (Image 05)
Container LabelNDC 10019-936-50
Cyclophosphamide
for Injection, USP
1 gram/vial
CYTOTOXIC AGENT
FOR SINGLE DOSE USE
STERILE, NON-PYROGENIC
FOR PARENTERAL USE
INTALERE CHOICE Logo
Manufactured for Intalere Choice
by Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
Each vial contains 1 gram cyclophosphamide.
For IV Infusion Use: Add 50 mL
Sterile Water for Injection, USP, and shake
vigorously to dissolve the drug.
For Direct Injection Use: Add 50 mL
0.9% Sodium Chloride Injection, USP, and
shake vigorously to dissolve the drug.
See insert for indications and dosage
schedule. Store vial at or below 25°C (77°F)
[see USP Controlled Room Temperature].
Bar Code
(01)00310019936505
USA HA-65-01-632 C 768
LOT/EXP:
Cyclophosphamide Intalere Representative Carton Lbl 10019-936-01 Panel 1 (Image 06)
Cyclophosphamide Intalere Representative Carton Lbl 10019-936-01 Panel 2 (Image 07)
Carton LabelNDC 10019-936-01
Cyclophosphamide
for Injection, USP
1 gram/vial
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
Cyclophosphamide
for Injection, USP
1 gram/vial
Bar Code
HA-80-02-317
USA
Each vial contains 1 g cyclophosphamide.
For IV Infusion Use:
Add 50 mL Sterile Water for Injection,
USP, and shake vigorously to dissolve
the drug.
For Direct Injection Use: Add 50 mL
0.9% Sodium Chloride Injection, USP,
and shake vigorously to dissolve
the drug.
Store vial at or below 25°C (77°F)
[see USP Controlled Room Temperature].
DOSAGE: See accompanying literature
for directions for use. Should not be
prescribed without thorough knowledge
of dose, indications and toxicity as
contained in accompanying literature.
CYTOTOXIC AGENT
FOR SINGLE DOSE USE
STERILE, NON-PYROGENIC
FOR PARENTERAL USE
C
631
NDC 10019-936-01
Cyclophosphamide
for Injection, USP
1 gram/vial
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
LOT/EXP:
NDC 10019-936-01
Cyclophosphamide
for Injection, USP
1 gram/vial
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
Cyclophosphamide Intalere Representative Container Lbl 10019-937-10 (Image 08)
Container LabelNDC 10019-937-10
Cyclophosphamide
for Injection, USP
2 gram/vial
CYTOTOXIC AGENT
FOR SINGLE DOSE USE
STERILE, NON-PYROGENIC
FOR PARENTERAL USE
Rx only
INTALERE CHOICE Logo
Manufactured for Intalere Choice
by Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
LOT/EXP:
Each vial contains 2 g cyclophosphamide.
For IV Infusion Use: Add 100 mL
Sterile Water for Injection, USP, and shake
vigorously to dissolve the drug.
For Direct Injection Use: Add 100 mL
0.9% Sodium Chloride Injection, USP, and
shake vigorously to dissolve the drug.
See insert for indications and dosage
schedule. Store vial at or below 25°C (77°F)
[see USP Controlled Room Temperature].
Bar Code
(01)00310019937106
USA HA-65-01-633 C769
Representative Cyclophosphamide Intelere Carton Lbl Ndc 10019-937-01 Panel 1 (Image 09)
Representative Cyclophosphamide Intelere Carton Lbl Ndc 10019-937-01 Panel 2 (Image 10)
Carton LabelNDC 10019-937-01
Cyclophosphamide
for Injection, USP
2 gram/vial
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
Cyclophosphamide
for Injection, USP
2 gram/vial
Barcode
HA-80-02-318
USA
Each vial contains 2 g cyclophosphamide.
For IV Infusion Use: Add 100 mL Sterile Water
for Injection, USP, and shake vigorously to
dissolve the drug.
For Direct Injection Use: Add 100 mL
0.9% Sodium Chloride Injection, USP,
and shake vigorously to dissolve the drug.
Store vial at or below 25°C (77°F)
[see USP Controlled Room Temperature].
DOSAGE: See accompanying literature for
directions for use. Should not be prescribed
without thorough knowledge of dose,
indications and toxicity as contained in
accompanying literature.
CYTOTOXIC AGENT
FOR SINGLE DOSE USE
STERILE, NON-PYROGENIC
FOR PARENTERAL USE
C
630
NDC 10019-937-01
Cyclophosphamide
for Injection, USP
2 gram/vial
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
LOT/EXP:
2638B5152
Barcode
NDC 10019-937-01
Cyclophosphamide
for Injection, USP
2 gram/vial
Rx only
MUST BE DILUTED
FOR IV INFUSION
OR DIRECT INJECTION USE
1 Single Dose Vial
INTALERE CHOICE Logo
Manufactured for
Intalere Choice by
Baxter Healthcare Corporation
Deerfield, IL 60015 USA
Made in Germany
Representative Shipper Label 10019-935-01 (Image 11)
Shipper LabelSerialization barcode
INTALERECHOICE®
Cyclophosphamide for Injection, USP 500 mg
Store at or below 25°C (77°F).
NDC 10019-935-01
120 Packs, each containing 1 x 500 mg Single Dose Vials
Manufactured by Baxter Healthcare Corporation, Deerfield, IL 60015 USA
EXP: MMM JJJJ LOT: JMXXXA QTY: 00
Barcode
(17) 000000 (10) JMXXXA (30) 00
Barcode
(1) 50310019935015 (21) 123456789012
Baxter Product Code: 2638B5148
USA 55382622
Representative Shipper Label 10019-936-01 (Image 12)
Shipper LabelSerialization barcode
INTALERECHOICE®
Cyclophosphamide for Injection, USP 2 g
Store at or below 25°C (77°F).
NDC 10019-936-01
120 Packs, each containing 1 x 1 g Single Dose Vials
Manufactured by Baxter Healthcare Corporation, Deerfield, IL 60015 USA
EXP: MMM JJJJ LOT: JMXXXA QTY: 00
Barcode
(17) 000000 (10) JMXXXA (30) 00
Barcode
(1) 50310019936012 (21) 123456789012
Baxter Product Code: 2638B5150
USA 55382632
Representative Shipper Label 10019-937-01 (Image 13)
Shipper LabelSerialization barcode
INTALERECHOICE®
Cyclophosphamide for Injection, USP 2 g
Store at or below 25°C (77°F).
NDC 10019-937-01
60 Packs, each containing 1 x 2 g Single Dose Vials
Manufactured by Baxter Healthcare Corporation, Deerfield, IL 60015 USA
EXP: MMM JJJJ LOT: JMXXXA QTY: 00
Barcode
(17) 000000 (10) JMXXXA (30) 00
Barcode
(1) 50310019937019 (21) 123456789012
Baxter Product Code: 2638B5152
USA 55382642