Daptomycin Injection, Powder, Lyophilized, For Solution
NDC 16714-892

View dosage, usage, ingredients, routes, and UNII mappings.
Table of Contents
  1. Product Information
  2. Product Packages
  3. What is NDC 16714-892?
  4. Daptomycin Uses
  5. Active Ingredients
  6. Active Ingredients UNII Codes
  7. Inactive Ingredients UNII Codes
  8. NDC to RxNorm Crosswalk
  9. Pharmacologic Classes
  10. Patient Education

Product Information

This product is approaching its end of marketing date. An upcoming end of marketing date means the product has been delisted but will remain in the NDC database until the end of marketing date is reached. In most cases, the FDA advises firms to use the expiration date of the last lot produced as the end marketing date, reflecting the possibility that the product may still be available even after manufacturing has stopped.

Daptomycin is a ANDA-approved product labeled by Northstar Rxllc. This medication is an antibiotic used to treat serious bacterial infections. It is supplied as a injection, powder, lyophilized, for solution for intravenous administration. This product entry covers the primary NDC 16714-892 and its associated package configuration. This profile includes active and inactive ingredient UNII references and FDA labeling data.

Primary Identification

NDC Product Code:
16714-892
Proprietary Name:
Daptomycin
Non-Proprietary Name: [1]
Daptomycin
Substance Name: [2]
Daptomycin
NDC Directory Status:
Human Prescription Drug
Product Type: [3]
ACTIVE PRODUCT INCLUDED in the NDC Directory
Code Navigator:

Clinical Specifications

Dosage Form:
Injection, Powder, Lyophilized, For Solution - A dosage form intended for the solution prepared by lyophilization ("freeze drying"), a process which involves the removal of water from products in the frozen state at extremely low pressures; this is intended for subsequent addition of liquid to create a solution that conforms in all respects to the requirements for Injections.
Administration Route(s): [4]
Intravenous - Administration within or into a vein or veins.

Labeler & Regulatory Data

Labeler Name: [5]
Northstar Rxllc
Labeler Code:
16714
Product Label ID:
1c5dee92-299e-26f6-6332-e6a8fd376526
HCPCS Code:
J0878 - INJECTION, DAPTOMYCIN, 1 MG
FDA Application Number: [6]
ANDA208375
Marketing Category: [8]
ANDA - A product marketed under an approved Abbreviated New Drug Application.

Marketing Timeline

Start Marketing Date: [9]
06-13-2022
End Marketing Date: [10]
06-30-2026
Exclude Flag: [12]
N

Code Structure Chart

Product Details

What is NDC 16714-892?

The NDC code 16714-892 is assigned by the FDA to the product Daptomycin. This pharmaceutical product is labeled by Northstar Rxllc and is currently categorized as listed product. The medication is a injection, powder, lyophilized, for solution administered via intravenous route. In terms of distribution, this product is available in a single package configuration. The associated package NDC(s) include: 16714-892-01. Beyond standard identification, this entry provides technical data including pharmacologic classes, UNII ingredient references, and RxNorm cross-referencing for healthcare systems.

What are the uses of this product?

This medication is an antibiotic used to treat serious bacterial infections. It works by stopping the growth of bacteria. This medication is not recommended for use in children younger than 12 months due to possible risk of serious side effects.

What are Active Ingredients of this product?

An active ingredient is the substance responsible for the medicinal effects of a product specified by the substance's molecular structure or if the molecular structure is not known, defined by an unambiguous definition that identifies the substance. Each active ingredient name is the preferred term of the UNII code submitted.

Which are the associated UNII Codes?

The UNII codes for the active ingredients in this product are:

Which are the Inactive Ingredients associated UNII Codes?

The inactive ingredients are all the component of a medicinal product OTHER than the active ingredient(s). The acronym "UNII" stands for “Unique Ingredient Identifier” and is used to identify each inactive ingredient present in a product. The UNII codes for the inactive ingredients in this product are:

What is the NDC to RxNorm Crosswalk for this product?

RxNorm is a normalized naming system for generic and branded drugs that assigns unique concept identifier(s) known as RxCUIs to NDC products.The NDC to RxNorm Crosswalk for this produdct indicates multiple concept unique identifiers (RXCUIs) are associated with this product:

Which are the Pharmacologic Classes of this product?

A pharmacologic class is a group of drugs that share the same scientifically documented properties. The following is a list of the reported pharmacologic class(es) corresponding to the active ingredients of this product.

* Please review the full disclaimer at the bottom of this page.

Patient Education

Daptomycin Injection


Daptomycin injection is used to treat certain blood infections or serious skin infections caused by bacteria in adults and children 1 year of age and older. Daptomycin injection is in a class of medications called cyclic lipopeptide antibiotics. It works by killing bacteria. Antibiotics such as daptomycin injection will not work for treating colds, flu, or other viral infections. Using antibiotics when they are not needed increases your risk of getting an infection later that resists antibiotic treatment.
[Learn More]


Antibiotics


What are antibiotics?

Antibiotics are medicines that fight bacterial infections in people and animals. They work by killing the bacteria or by making it hard for the bacteria to grow and multiply.

Antibiotics can be taken in different ways:

  • Orally (by mouth). This could be pills, capsules, or liquids.
  • Topically. This might be a cream, spray, or ointment that you put on your skin. It could also be eye ointment, eye drops, or ear drops.
  • Through an injection or intravenously (IV). This is usually for more serious infections.

What do antibiotics treat?

Antibiotics only treat certain bacterial infections, such as strep throat, urinary tract infections, and E. coli.

You may not need to take antibiotics for some bacterial infections. For example, you might not need them for many sinus infections or some ear infections. Taking antibiotics when they're not needed won't help you, and they can have side effects. Your health care provider can decide the best treatment for you when you're sick. Don't ask your provider to prescribe an antibiotic for you.

Do antibiotics treat viral infections?

Antibiotics do not work on viral infections. For example, you shouldn't take antibiotics for:

What are the side effects of antibiotics?

The side effects of antibiotics range from minor to very severe. Some of the common side effects include:

More serious side effects can include:

Call your health care provider if you develop any side effects while taking your antibiotic.

Why is it important to take antibiotics only when they're needed?

You should only take antibiotics when they are needed because they can cause side effects and can contribute to antibiotic resistance. Antibiotic resistance happens when the bacteria change and become able to resist the effects of an antibiotic. This means that the bacteria continue to grow.

How do I use antibiotics correctly?

When you take antibiotics, it is important that you take them responsibly:

  • Always follow the directions carefully. Finish your medicine even if you feel better. If you stop taking them too soon, some bacteria may survive and re-infect you.
  • Don't save your antibiotics for later.
  • Don't share your antibiotic with others.
  • Don't take antibiotics prescribed for someone else. This may delay the best treatment for you, make you even sicker, or cause side effects.

Centers for Disease Control and Prevention


[Learn More]


* Please review the full disclaimer at the bottom of this page.

Product & Regulatory Definitions
What is the Non-Proprietary Name? The non-proprietary name is sometimes called the generic name. The generic name usually includes the active ingredient(s) of the product.
What is the Substance Name? An active ingredient is the substance responsible for the medicinal effects of a product specified by the substance's molecular structure or if the molecular structure is not known, defined by an unambiguous definition that identifies the substance. Each active ingredient name is the preferred term of the UNII code submitted.
What kind of product is this? Indicates the type of product, such as Human Prescription Drug or Human Over the Counter Drug. This data element matches the “Document Type” field of the Structured Product Listing.
What are the Administration Routes? The translation of the route code submitted by the firm, indicating route of administration.
What is the Labeler Name? Name of Company corresponding to the labeler code segment of the Product NDC.
What is the FDA Application Number? This corresponds to the NDA, ANDA, or BLA number reported by the labeler for products which have the corresponding Marketing Category designated. If the designated Marketing Category is OTC Monograph Final or OTC Monograph Not Final, then the Application number will be the CFR citation corresponding to the appropriate Monograph (e.g. “part 341”). For unapproved drugs, this field will be null.
What is the Marketing Category? Product types are broken down into several potential Marketing Categories, such as NDA/ANDA/BLA, OTC Monograph, or Unapproved Drug. One and only one Marketing Category may be chosen for a product, not all marketing categories are available to all product types. Currently, only final marketed product categories are included. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.
What is the Start Marketing Date? This is the date that the labeler indicates was the start of its marketing of the drug product.
What is the End Marketing Date? This is the date the product will no longer be available on the market. If a product is no longer being manufactured, in most cases, the FDA recommends firms use the expiration date of the last lot produced as the EndMarketingDate, to reflect the potential for drug product to remain available after manufacturing has ceased. Products that are the subject of ongoing manufacturing will not ordinarily have any EndMarketingDate. Products with a value in the EndMarketingDate will be removed from the NDC Directory when the EndMarketingDate is reached.
What is the NDC Exclude Flag? This field indicates whether the product has been removed/excluded from the NDC Directory for failure to respond to FDA"s requests for correction to deficient or non-compliant submissions, or because the listing certification is expired, or because the listing data was inactivated by FDA, or because it was discontinued by the labeler. Possible values in this field are: "D", "E", "I", "N", "U".