3m Soluprep S Solution
NDC 17518-083

The NDC code 17518-083 is assigned by the FDA to the product 3m Soluprep S. It is commonly known by its generic name, chlorhexidine gluconate and isopropyl alcohol. This pharmaceutical product is labeled by Solventum Us Llc and is currently categorized as listed product. The medication is a solution administered via topical route. In terms of distribution, this product is available in a single package configuration. The associated package NDC(s) include: 17518-083-02. Beyond standard identification, this entry provides technical data including pharmacologic classes, UNII ingredient references, and RxNorm cross-referencing for healthcare systems.

Use with care in premature infants or infants under 2 months of age. These products may cause irritation or chemical burns. discard the applicator after a single use along with any portion of the solution not required to cover the prepped area. It is not necessary to use the entire amount available. Getting Patient Ready for Solution:use in well-ventilated area do not microwave or heat the solution applicator apply to clean, completely dry, residue-free, intact skin when hair removal is necessary, use a surgical clipper on the morning of the surgery. If a wet shave is used, thoroughly remove all soap residues. Activating the Applicator:remove applicator from package; do not touch sponge with sponge face parallel to the floor, press the cap end of the applicator. Solution will begin to flow into sponge. When Applying Solution:completely wet the treatment area with antiseptic dry surgical sites (e.g., abdomen or arm): use repeated back-and-forth strokes for 30 seconds moist surgical sites (e.g., inguinal fold): use repeated back-and-forth strokes for 2 minutes maximal treatment area for one applicator is approximately 13.2 in. x 21.6 in. (285.2 in2). do not allow solution to pool; tuck prep towels to absorb solution, and then remove clean umbilicus with enclosed swabs when applicable. (Moisten swabs by pressing against solution-soaked sponge applicator.) avoid getting solution into hairy areas. Wet hair is flammable. Hair may take up to 1 hour to dry. when prepping skin folds, toes, or fingers, use a sterile-gloved hand to hold skin apart until completely dry. After Applying Solution:to reduce the risk of fire, wait until solution is completely dry (minimum of 3 minutes on hairless skin; up to 1 hour in hair) While Waiting for Solution to Completely Dry:do not drape or use ignition source (e.g., cautery, laser) check for pooled solution. Use sterile gauze to soak up pooled solution. Do not blot because it may remove solution from skin. remove wet materials from prep area. Replace if necessary. After Solution is Completely Dry:to reduce the risk of fire, begin draping and/or using cautery only after solution is completely dry and all wet materials are removed if incise drapes are used, apply directly to dry prep apply dressing following standard practices use with care in premature infants or infants under 2 months of age. These products may cause irritation or chemical burns. discard the applicator after a single use along with any portion of the solution not required to cover the prepped area. It is not necessary to use the entire amount available. Getting Patient Ready for Solution:use in well-ventilated area do not microwave or heat the solution applicator apply to clean, completely dry, residue-free, intact skin when hair removal is necessary, use a surgical clipper on the morning of the surgery. If a wet shave is used, thoroughly remove all soap residues. Activating the Applicator:remove applicator from package; do not touch sponge grasp products by wrapping hand and fingers around the labeled portion of the applicator. Place thumb on the lever with sponge face parallel to the floor, snap lever to allow fluid to flow into sponge. When Applying Solution:completely wet the treatment area with antiseptic dry surgical sites (e.g., abdomen or arm): use repeated back-and-forth strokes for 30 seconds moist surgical sites (e.g., inguinal fold): use repeated back-and-forth strokes for 2 minutes maximal treatment area for one applicator is approximately 8.4 in. x 15.6 in. (131.4 in2). do not allow solution to pool; tuck prep towels to absorb solution, and then remove avoid getting solution into hairy areas. Wet hair is flammable. Hair may take up to 1 hour to dry. when prepping skin folds, toes, or fingers, use a sterile-gloved hand to hold skin apart until completely dry. After Applying Solution:to reduce the risk of fire, wait until solution is completely dry (minimum of 3 minutes on hairless skin; up to 1 hour in hair) While Waiting for Solution to Completely Dry:do not drape or use ignition source (e.g., cautery, laser) check for pooled solution. Use sterile gauze to soak up pooled solution. Do not blot because it may remove solution from skin. remove wet materials from prep area. Replace if necessary. After Solution is Completely Dry:to reduce the risk of fire, begin draping and/or using cautery only after solution is completely dry and all wet materials are removed if incise drapes are used, apply directly to dry prep apply dressing following standard practices use with care in premature infants or infants under 2 months of age. These products may cause irritation or chemical burns. discard the applicator after a single use along with any portion of the solution not required to cover the prepped area. It is not necessary to use the entire amount available. Getting Patient Ready for Solution:use in well-ventilated area do not microwave or heat the solution applicator apply to clean, completely dry, residue-free, intact skin when hair removal is necessary, use a surgical clipper on the morning of the surgery. If a wet shave is used, thoroughly remove all soap residues. Activating the Applicator:remove applicator from package; do not touch sponge grasp product by wrapping hand and fingers around the labeled portion of the applicator. Place thumb on the lever with sponge face parallel to the floor, snap lever to allow fluid to flow into sponge. When Applying Solution:completely wet the treatment area with antiseptic dry surgical sites (e.g., abdomen or arm): use repeated back-and-forth strokes for 30 seconds moist surgical sites (e.g., inguinal fold): use repeated back-and-forth strokes for 2 minutes maximal treatment area for one applicator is approximately 8.4 in. x 15.6 in. (131.4 in2) do not allow solution to pool; tuck prep towels to absorb solution, and then remove avoid getting solution into hairy areas. Wet hair is flammable. Hair may take up to 1 hour to dry. when prepping skin folds, toes, or fingers, use a sterile-gloved hand to hold skin apart until completely dry. After Applying Solution:to reduce the risk of fire, wait until solution is completely dry (minimum of 3 minutes on hairless skin; up to 1 hour in hair) While Waiting for Solution to Completely Dry:do not drape or use ignition source (e.g., cautery, laser) check for pooled solution. Use sterile gauze to soak up pooled solution. Do not blot because it may remove solution from skin. remove wet materials from prep area. Replace if necessary. After Solution is Completely Dry:to reduce the risk of fire, begin draping and/or using cautery only after solution is completely dry and all wet materials are removed if incise drapes are used, apply directly to dry prep apply dressing following standard practices

An active ingredient is the substance responsible for the medicinal effects of a product specified by the substance's molecular structure or if the molecular structure is not known, defined by an unambiguous definition that identifies the substance. Each active ingredient name is the preferred term of the UNII code submitted.

• CHLORHEXIDINE GLUCONATE 20 mg/mL
• ISOPROPYL ALCOHOL .7 mL/mL

RxNorm is a normalized naming system for generic and branded drugs that assigns unique concept identifier(s) known as RxCUIs to NDC products.The NDC to RxNorm Crosswalk for this produdct indicates multiple concept unique identifiers (RXCUIs) are associated with this product:

• RxCUI: 2629724 - SoluPrep 2 % / 70 % Topical Solution
• RxCUI: 2629724 - chlorhexidine gluconate 20 MG/ML / isopropyl alcohol 0.7 ML/ML Topical Solution [Soluprep]
• RxCUI: 2629724 - SoluPrep (chlorhexidine gluconate 2 % / isopropyl alcohol 70 % ) Topical Solution
• RxCUI: 858726 - chlorhexidine gluconate 2 % / isopropyl alcohol 70 % Topical Solution
• RxCUI: 858726 - chlorhexidine gluconate 20 MG/ML / isopropyl alcohol 0.7 ML/ML Topical Solution

A pharmacologic class is a group of drugs that share the same scientifically documented properties. The following is a list of the reported pharmacologic class(es) corresponding to the active ingredients of this product.

• Decreased Cell Wall Integrity - [PE] (Physiologic Effect)