Oxygen
FDA Label NDC 48664-001

Full FDA labeling including Indications, Dosage, Usage, and Precautions

Structured Product Label

The following Structured Product Label (SPL) was submitted to the FDA by Weiler Welding Company for the product Oxygen (NDC 48664-001). This document serves as the official prescribing information, containing essential scientific data and clinical materials required for healthcare providers and patients.

This specific version of the label includes detailed information regarding package label.principal display panel, and other regulatory disclosures. Use the navigation below to review specific sections of the FDA submission.

Package Label.Principal Display Panel

USP

[
OXYGEN 2 SYMBOL]

UN1073

ALWAYS KEEP CONTAINER IN UPRIGHT POSITION
CONTENTS: _______________________________________

LOT #: ____________________________________________

WARNING:For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, only.    Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Use only with pressure reducing equipment and apparatus designed for oxygen. Do not attempt to use on patients who have stopped breathing, unless used in conjunction with resuscitative equipment.

    Produced by Air Liquefaction.

WARNING:
EXTREMELY COLD OXIDIZING LIQUID AND GAD UNDER PRESSURE.
    VIGOROUSLY ACCELERATES COMBUSTION.
    COMBUSTIBLES IN CONTACT WITH LIQUID OXYGEN MAY EXPLODE ON IGNITION OR IMPACT.
    CAN CAUSE SEVERE FROSTBITE.

    Keep oil, grease, and combustibles away.
    Use only with equipment cleaned for oxygen service.
    Store and use with adequate ventilation.
    Do not get liquid in eyes, on skin, or clothing.
    For liquid withdrawal, wear face shield and gloves.
    Do not drop. Use suitable hand truck for container movement.
    Avoid spills. Do not walk on or roll equipment over spills.
    Cylinder temperature should not exceed 52 degrees C (125 degrees F)
    Close valve after each use and when empty.
    Use in accordance with the Material Safety Data Sheet (MSDS).

FIRST AID: IN CASE OF FROSTBITE, obtain medical treatment immediately.

    CAS: 7782-44-7

    DO NOT REMOVE THIS PRODUCT LABEL.

[Weiler Welding Logo]

2400 SANDRIDGE DR. DAYTON, OHIO
8598 INDUSTRY PARK DR. PIQUA, OHIO
2865 SELLARS ROAD MORAINE, OHIO
5 EAST MAIN RICHMOND, INDIANA

EMERGENCY RESPONSE NUMBER: 1-800-424-9300

Image Of Liquid Oxygen Label (Loxygen)

Image Of Liquid Oxygen Label (Loxygen)

* Please review the disclaimer below.