Nitrous Oxide Gas
FDA Label NDC 54218-800

Full FDA labeling including Indications, Dosage, Usage, and Precautions

Structured Product Label

The following Structured Product Label (SPL) was submitted to the FDA by United States Welding, Inc. for the product Nitrous Oxide (NDC 54218-800). This document serves as the official prescribing information, containing essential scientific data and clinical materials required for healthcare providers and patients.

This specific version of the label includes detailed information regarding nitrous oxide usp label, general warnings and precautions, and other regulatory disclosures. Use the navigation below to review specific sections of the FDA submission.

Label Section Quick Index

Nitrous Oxide Usp Label

NITROUS OXIDE USP UN 1070Rx ONLYNON-FLAMMABLE GAS - 2 OXIDIZER - 5.1First Aid: IF INHALED, remove to fresh air.  If not breathing, give artificial respiration.  If breathing is difficult, give oxygen.  Call a physician.In case of Frostbite, obtain medical treatment immediatelyDO NOT REMOVE THIS PRODUCT LABELCAS 10024-97-234436 (R 04/05)

NITROUS OXIDE USP UN 1070

Rx ONLY

NON-FLAMMABLE GAS - 2 OXIDIZER - 5.1

First Aid: IF INHALED, remove to fresh air.  If not
breathing, give artificial respiration.  If breathing is difficult,
give oxygen.  Call a physician.

In case of Frostbite, obtain medical treatment immediately

DO NOT REMOVE THIS PRODUCT LABEL

CAS 10024-97-2

47736 (R 06/06)

General Warnings And Precautions

WARNING: Administration of Nitrous Oxide may be hazardous or contraindicated.  For use only by or under the supervision of a licensed practitionerwho is experienced in the use and administration of Nitrous Oxide, and is familiar with the indications, effects, dosages, methods, and frequency and duration of administration, and with the hazards, contraindications and side effects and the precautions to be taken.WARNING:        HIGH PRESSURE OXIDIZING LIQUID AND GAS.                        VIGOROUSLY ACCELERATES COMBUSTION.                        CAN CAUSE RAPID SUFFOCATION.                      CAN CAUSE ANESTHETIC EFFECTS.                         MAY CAUSE FROSTBITE.Avoid breathing gas.  Store and use with adequate ventilation.  Keep oil and grease away.  Use only with equipment cleaned for oxygen and ratedfor cylinder pressure.  Do not get liquid in eyes, on skin, or clothing. Cylinder temperature should not exceed 52 C (125 F)  Open valve slowly.  Close valveafter each use and when empty.  Use a back flow preventive device in the piping.  Use in accordance with the Material Safety Data Sheet (MSDS)

* Please review the disclaimer below.