FDA Label for Oxygen
View Indications, Usage & Precautions
Oxygen Product Label
The following document was submitted to the FDA by the labeler of this product A & B Welding Supply Co.. The document includes published materials associated whith this product with the essential scientific information about this product as well as other prescribing information. Product labels may durg indications and usage, generic names, contraindications, active ingredients, strength dosage, routes of administration, appearance, warnings, inactive ingredients, etc.
Package Label.Principal Display Panel
OXYGEN,
COMPRESSED
USP
U.N. 1072
OXYGEN 2
17033 (R 04/05)
WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, RX ONLY. Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Use only with pressure reducing equipment and apparatus designed for oxygen. Do not attempt to use on patients who have stopped breathing, unless used in conjunction with resuscitative equipment. Produced by Air Liquefaction.
WARNING: HIGH PRESSURE OXIDIZING GAS. VIGOROUSLY ACCELERATES COMBUSTION. Keep oil and grease away. Open valve slowly. Store and use with adequate ventilation. Use only with equipment cleaned for oxygen service and rated for cylinder pressure. Use a back flow preventive device in the piping. Close valve after each use and when empty. Cylinder temperature should not exceed 52 degrees C (125 degrees F). Use in accordance with the Material Safety Data Sheet (MSDS).
CAS: 7782-44-7
DO NOT REMOVE THIS PRODUCT LABEL.
DISTRIBUTED BY:
A and B WELDING SUPPLY CO.
RAPID CITY, S.D.
CONTENTS: LTRS: CU.FT.
Oxygen,
Refrigerated
Liquid
USP
UN 1073
OXYGEN 2
LOT:
CONTENTS: LITERS
ALWAYS KEEP CONTAINER IN UPRIGHT POSITION.
WARNING: EXTREMELY COLD OXIDIZING LIQUID AND GAS UNDER PRESSURE.
VIGOROUSLY ACCELERATES COMBUSTION.
COMBUSTIBLES IN CONTACT WITH LIQUID OXYGEN MAY EXPLODE ON IGNITION OR IMPACT.
CAN CAUSE SEVERE FROSTBITE.
Keep oil, grease and combustibles away.
Use only with equipment cleaned for oxygen service.
Store and use with adequate ventilation.
Do not get liquid in eyes, on skin or clothing.
For liquid withdrawal, wear face shield and gloves.
Do not drop. Use suitable hand truck for container movement.
Avoid spills. Do not walk on or roll equipment over spills.
Close valve after each use and when empty.
Use in accordance with Material Safety Data Sheet(MSDS).
FIRST AID: IN CASE OF FROSTBITE, obtain medical treatment immediately.
WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx ONLY.
Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect of arterial blood, may be harmful. Use only with pressure reducing equipment and apparatus designed for oxygen. Do not attempt to use on patients who have stopped breathing, unless used in conjunction with resuscitative equipment.
DO NOT REMOVE THIS PRODUCT LABEL.
Filled and Distributed by:
A and B WELDING SUPPLY CO.
914 E. Chicago St.
RAPID CITY, S.D. 57701
605-343-5365
OXYGEN, COMPRESSED USP
UN1072
OXYGEN 2
Contents LTRS CU.FT.
WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only. Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Use only with pressure reducing equipment and apparatus designed for oxygen. Do not attempt to use on patients who have stopped breathing, unless used in conjunction with resuscitative equipment. Produced by Air Liquefaction.
WARNING: HIGH PRESSURE OXIDIZING GAS. VIGOROUSLY ACCELERATES COMBUSTION. Keep oil and grease away. Open valve slowly. Store and use with adequate ventilation. Use only with equipment cleaned for oxygen service and rated for cylinder pressure. Use a back flow preventive device in the piping. Close valve after each use and when empty. Cylinder temperature should not exceed 52 degrees C (125 degrees F). Use is accordance with the Material Safety Data Sheet (MSDS). DO NOT REMOVE THIS PRODUCT LABEL.
FILLED AND DISTRIBUTED BY:
A and B WELDING SUPPLY CO., INC.
914 E CHICAGO ST. RAPID CITY, SD 57701
605-343-5365
* Please review the disclaimer below.