Oxygen, Compressed
FDA Label NDC 61336-001

Full FDA labeling including Indications, Dosage, Usage, and Precautions

Structured Product Label

The following Structured Product Label (SPL) was submitted to the FDA by Gulf State Chemical And Welding Supply Inc. for the product Oxygen, Compressed (NDC 61336-001). This document serves as the official prescribing information, containing essential scientific data and clinical materials required for healthcare providers and patients.

This specific version of the label includes detailed information regarding oxygen, compressed usp 0.49 liters (15c/f) (61336-001-00) | oxygen, compressed usp 0.82 liters (25c/f) (61336-001-01) | oxygen, compressed usp 4.11 liters (125c/f) (61336-001-02) | oxygen, compressed usp 9.24 liters (281c/f) (61336-001-03) | oxygen, compressed usp 180 liters (61336-001-04), and other regulatory disclosures. Use the navigation below to review specific sections of the FDA submission.

Label Section Quick Index

Oxygen, Compressed Usp 0.49 Liters (15C/F) (61336-001-00) | Oxygen, Compressed Usp 0.82 Liters (25C/F) (61336-001-01) | Oxygen, Compressed Usp 4.11 Liters (125C/F) (61336-001-02) | Oxygen, Compressed Usp 9.24 Liters (281C/F) (61336-001-03) | Oxygen, Compressed Usp 180 Liters (61336-001-04)

WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical application, Rx only.

Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Use only with pressure reducing equipment and apparatus designed for oxygen. Do not attempt to use on patients who have stopped breathing, unless used in conjunction with resuscitative equipment.

Produced by Air Liquefaction.

WARNING: HIGH PRESSURE OXIDIZING GAS. VIGOROUSLY ACCELERATES COMBUSTION.

Keep oil and grease away. Open valve slowly. Store and use with adequate ventilation. Use only with equipment cleaned for Oxygen service and rated for cylinder pressure. Use a back flow preventive device in the piping. Close valve after each use and when empty. Cylinder temperature should not exceed 52 degrees C (125 degrees F)

Use in accordance with the Material Safety Data Sheet (MSDS).

GULF STATE WELDING SUPPLY

16834 SW 16TH STREET BLOUNTSTOWN, FL 32424

850-674-4511

Oxygen (Oxygen)

Oxygen (Oxygen)

* Please review the disclaimer below.