Oxygen Gas
FDA Label NDC 65119-345

OXYGEN COMPRESSED UN 1072 OXYGEN U.S.P.
               WARNING: HIGH PRESSURE OXIDIZING GAS VIGOROUSLY ACCELERATES COMBUSTION STORE AND USE WITH ADEQUATE VENTILATION.  USE A BACK FLOW DEVICE IN THE PIPING.  CYLINDER TEMPERATURE SHOULD NOT EXCEED 52 C (125 F).  Keep oil, grease and combustibles away.  Open valve slowly
               Use only with equipment cleaned for oxygen service and rated for cylinder pressure3.  User shall secure cylinder in use and in storage.  
               Close valve after each use; and when empty.  Keep valve protective cap in place when not in sue, if so equipped.  Use in accordance with MSDS.
               WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation.  For all other                                          medical applications RX only.
               Uninterrupted use of high concentrations of oxygen over a long duration without monitoring its effect on oxygen content of arterial blood may be harmful.  Use
               only pressure reducing equipment and apparatus designed for oxygen.  Do not attempt to use on patients who have stopped breathing unless
               used in conjunction with resuscitative equipment.  Produced by Air Liquefaction
               Do not remove this label
               Made in the USA  Rev 1008

Shoulder Label (Airweld Hp O2)

OXYGEN
REFRIGERATED LIQUID
OXYGEN 2
U.S.P. UN 1073
Gross Wt. ______ Lbs. ______ oz.
Net Wt. ________ Lbs. ______ oz.
Size ____________ Contents _____ Liters
Oxygen produced by Air Liquefaction ALWAYS KEEP CONTAINER IN UPRIGHT POSITION.
WARNING EXTREMELY COLD OXIDIZING LIQUID AND GAS UNDER PRESSURE VIGOROUSLY ACCELERATES COMBUSTION.  COMBUSTIBLES IN CONTACT WITH LIQUID OXYGEN MAY EXPLODE ON IGNITION OR IMPACT.  CAN CAUSE SEVERE FROSTBITE.  USE IN ACCORDANCE WITH OXYGEN, REFRIGERATED LIQUID MSDS.  DO NOT CHANGE OR FORCE FIT CONNECTIONS. USE A BACK FLOW PREVENTATIVE DEVICE IN THE PIPING.  CONTAINER TEMPERATURE SHOULD NOT EXCEED 52° C (125° f)
Keep oil, grease, and combustibles away.  Use only with equipment cleaned for oxygen service.  Use only with pressure reducing equipment and apparatus designed for oxygen.  Store and use with adequate ventilation.  Do not get liquid in eyes, on skin or clothing.  For liquid withdrawal, wear face shield and gloves.  Don not drop.  Use hand truck specifically designed for liquid cylinder movement.  Avoid spills.  Do not walk on or roll equipment over spills.  Close valve after each use and when empty.
WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation.  For all other medical applications, RX only.  Uninterrupted use of high concentrations of oxygen over a long duration without monitoring its effect on oxygen content of arterial blood may be harmful.  Do not attempt to use on patients who have stopped breathing unless used in conjunctions with resuscitative equipment.  Keep out of reach of children.  In case of frostbite, obtain medical treatment immediately
Do not remove this label CAS 7782-44-7 REV 10/08

Liquid Label (Airweld Liq O2)

Lot Number ________  Serial Number_______  Amount ___________________ LBS., GALS., Liters, CU., FT.

USP Tests
Test  ID – ODOR – ASSAY
LIMITS OK – NONE – 99.0%
RESULT


CUSTOMER WITNESSED TEST YES__  NO __ 
METHOD OF ANALYSIS FOR ASSAY IS THE PARAMAGNETIC OXYGEN ANALYZER
MANUFACTURER ______ MODEL #___________  S
CUSTOMER WITNESSED TEST YES__ NO__
SUPPLIERS SIGNATURE _____________________  DATE____
CUSTOMERS SIGNATURE ________________________  DATE_________

MEDICAL GASES
LIQUID OXYGEN, DELIVERY TAG
FILLED AND DISTRIBUTED BY
THIS VESSEL CONTAINS OXYGEN USP (see reverse side for test results)
OXYGEN PRODUCED BY THE AIR LIQUEFACTION PROCESS