FDA Label for Air
View Indications, Usage & Precautions
Air Product Label
The following document was submitted to the FDA by the labeler of this product Mitchell Welding Supply. The document includes published materials associated whith this product with the essential scientific information about this product as well as other prescribing information. Product labels may durg indications and usage, generic names, contraindications, active ingredients, strength dosage, routes of administration, appearance, warnings, inactive ingredients, etc.
Package Label.Principal Display Panel
AIR, COMPRESSED
UN1002
Medical Air, USP
Rx only. WARNING: Administration of Medical Air may be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and administration of Medical Air and is familiar with the indications, effects, dosages, methods, and frequency, and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken.
WARNING: CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. SUPPORTS COMBUSTION. Obtain, read and follow all safety instructions before use. Use a back flow preventive device in the piping. Mixture of Oxygen USP and Nitrogen NF. Use only with equipment rated for cylinder pressure. Do not open valve until connected to equipment prepared for use. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52 C (125 F). Read and follow the Safety Data Sheet (SDS) before use.
CAS: 132259-10-0 DO NOT REMOVE THIS PRODUCT LABEL.
MWS
Mitchell Welding Supply
3539 Highway 271
Tyler, TX 75708
903-593-7343
www.mitchellwelding.com
CONTENTS: LTRS: CU.FT.
AIR, COMPRESSED
UN1002
MEDICAL AIR, USP
CONTENTS: LTRS: CU.FT.
WARNING: Rx only. Administration of Medical Air may be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and administration of Medical Air and is familiar with the indications, effects, dosages, methods, and frequency, and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken.
WARNING: CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. SUPPORTS COMBUSTION. Obtain, read and follow all safety instructions before use. Use a back flow preventive device in the piping. Use only with equipment rated for cylinder pressure. Do not open valve until connected to equipment prepared for use. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52 C (125 F). Read and follow the Safety Data Sheet (SDS) before use.
CAS: 132259-10-0
DO NOT REMOVE THIS PRODUCT LABEL.
MWS
Mitchell Welding Supply
3539 Highway 271
Tyler, TX 75708
903-593-7343
www.mitchellwelding.com
* Please review the disclaimer below.