FDA Label for Vegalab Puretabs
View Indications, Usage & Precautions
Vegalab Puretabs Product Label
The following document was submitted to the FDA by the labeler of this product Vegalab Llc. The document includes published materials associated whith this product with the essential scientific information about this product as well as other prescribing information. Product labels may durg indications and usage, generic names, contraindications, active ingredients, strength dosage, routes of administration, appearance, warnings, inactive ingredients, etc.
Active Ingredients:
Benzalkonium Chloride 1%
Purpose:
Disinfectant
Warnings:
For external use only. Flammable. Keep away from geat or flame.
Do Not Use Section:
- Do not eat.
- Use only for indicated purpose
When Using This Product:
Keep out of eyes, ears, and mouth. In case of contact with eyes, rinse eyes thoroughly with water.
Use(S):
Sterilizing drinking water of viruses, bacteria, bacteria removal and infection prevention effect.
Directions:
- Put 1 tablet of disinfectant in 2.5-5 gallons of water and wait for 5-15 minutes.
- For clear water 5 min wait time and 5 gallons of water.
- For cloudy water up to 15 min wait time and 2.5 gallons of water.
Ask Doctor:
In case of adverse skin reaction, visit a hospital and follow your doctor's instructions.
Keep Out Of Reach Of Children:
Keep out of reach of Children
Other Information:
- Sealed storage lengthnes the storge period
- Avoid direct sunlight and store in a cool, dry place.
Inactive Ingredient(S):
Sodium chlorite, Sodium sulfite, Citric acid, Maleic acid
Storage:
Avoid direct sunlight and store in a cool, dry place
Precautions:
1. Don not eat.
2. Keep out of reach of infants and children
3. Do not let the contents come into contact with your eyes.
4. Do not use for any purpose other than those indicated.
5. Please follow the instructions and precautions to use.
First Aid:
1. If contents are ingested or swallowed, take first aid and consult a doctor immediately.
2. If it gets into your eyes, flush with running water and follow your doctor's instructions.
3. In case of skin reaction, visit the hospital and follow your doctor's instructions.
Dosage:
Add 1 tablet of disinfectant to 2.5-5 gallon of tap water and wait 5-15 minutes. For clear water 5 min wait time and 5 gallons of water. For cloudy water up to 15 min wait time and 2.5 gallons of water.
1) Fill a 2.5-5 gallon container with water
2) Add 1 tablet disinfectant to water (do not add water to tablets)
3) Wait 5-15 minutes, pour diluted water into the sprayer and spray an apporpriate amount on the area that needs disinfection.
* Please review the disclaimer below.
