FDA Label for Primaxin IV

1.1 Lower Respiratory Tract Infections

PRIMAXIN for intravenous use is indicated for the treatment of lower respiratory tract infections caused by susceptible strains of Staphylococcus aureus (penicillinase-producing isolates), Acinetobacter species, Enterobacter species, Escherichia coli, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella species, Serratia marcescens.

1.2 Urinary Tract Infections (Complicated And Uncomplicated)

PRIMAXIN is indicated for the treatment of urinary tract infections (complicated and uncomplicated) caused by susceptible strains of Enterococcus faecalis, Staphylococcus aureus (penicillinase-producing isolates), Enterobacter species, Escherichia coli, Klebsiella species, Morganella morganii, Proteus vulgaris, Providencia rettgeri, Pseudomonas aeruginosa.

1.3 Intra-Abdominal Infections

PRIMAXIN is indicated for the treatment of intra-abdominal infections caused by susceptible strains of Enterococcus faecalis, Staphylococcus aureus (penicillinase-producing isolates), Staphylococcus epidermidis, Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Morganella morganii, Proteus species, Pseudomonas aeruginosa, Bifidobacterium species, Clostridium species, Eubacterium species, Peptococcus species, Peptostreptococcus species, Propionibacterium species, Bacteroides species including B. fragilis, Fusobacterium species.

1.4 Gynecologic Infections

PRIMAXIN is indicated for the treatment of gynecologic infections caused by susceptible strains of Enterococcus faecalis, Staphylococcus aureus (penicillinase-producing isolates), Staphylococcus epidermidis, Streptococcus agalactiae (Group B streptococci), Enterobacter species, Escherichia coli, Gardnerella vaginalis, Klebsiella species, Proteus species, Bifidobacterium species, Peptococcus species, Peptostreptococcus species, Propionibacterium species, Bacteroides species including B. fragilis.

1.5 Bacterial Septicemia

PRIMAXIN is indicated for the treatment of bacterial septicemia caused by susceptible strains of Enterococcus faecalis, Staphylococcus aureus (penicillinase-producing isolates), Enterobacter species, Escherichia coli, Klebsiella species, Pseudomonas aeruginosa, Serratia species, Bacteroides species including B. fragilis.

1.6 Bone And Joint Infections

PRIMAXIN is indicated for the treatment of bone and joint infections caused by susceptible strains of Enterococcus faecalis, Staphylococcus aureus (penicillinase-producing isolates), Staphylococcus epidermidis, Enterobacter species, Pseudomonas aeruginosa.

1.7 Skin And Skin Structure Infections

PRIMAXIN is indicated for the treatment of skin and skin structure infections caused by susceptible strains of Enterococcus faecalis, Staphylococcus aureus (penicillinase-producing isolates), Staphylococcus epidermidis, Acinetobacter species, Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Morganella morganii, Proteus vulgaris, Providencia rettgeri, Pseudomonas aeruginosa, Serratia species, Peptococcus species, Peptostreptococcus species, Bacteroides species including B. fragilis, Fusobacterium species.

1.8 Endocarditis

PRIMAXIN is indicated for the treatment of endocarditis caused by susceptible strains of Staphylococcus aureus (penicillinase-producing isolates).

1.9 Limitations Of Use

• PRIMAXIN is not indicated in patients with meningitis because safety and efficacy have not been established.
• PRIMAXIN is not recommended in pediatric patients with CNS infections because of the risk of seizures [see Dosage and Administration (2.2), Warnings and Precautions (5.2), and Use in Specific Populations (8.4)].
• PRIMAXIN is not recommended in pediatric patients less than 30 kg with impaired renal function, as no data are available [see Use in Specific Populations (8.4), and Dosage and Administration (2.2)].
• Periodic assessment of organ system functions, including renal, hepatic and hematopoietic, is advisable during prolonged therapy.

1.10 Usage

To reduce the development of drug-resistant bacteria and maintain the effectiveness of PRIMAXIN and other antibacterial drugs, PRIMAXIN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

2.1 Dosage In Adults

For Intravenous Injection Only

• The dosage of PRIMAXIN in adult patients should be based on suspected or confirmed pathogen susceptibility as shown in Table 1 below. The dosage recommendations for PRIMAXIN represent the quantity of imipenem to be administered. An equivalent amount of cilastatin is also present in the solution.
• These doses should be used for patients with creatinine clearance of greater than or equal to 90 mL/min. A reduction in dose must be made for patients with creatinine clearance less than 90 mL/min as shown in Table 3 [see Dosage and Administration (2.3)].
• Recommend that the maximum total daily dosage not exceed 4 g/day.
• Administer 500 mg by intravenous infusion over 20 to 30 minutes.
• Administer 1000 mg by intravenous infusion over 40 to 60 minutes.
• In patients who develop nausea during the infusion, the rate of infusion may be slowed.

Table 1: Dosage of PRIMAXIN in Adult Patients with Creatinine Clearance Greater than or Equal to 90 mL/min

Suspected or Proven Pathogen Susceptibility	Dosage of PRIMAXIN
If the infection is suspected or proven to be due to a susceptible bacterial species	500 mg every 6 hours OR 1000 mg every 8 hours
If the infection is suspected or proven to be due to bacterial species with intermediate susceptibility (identified under column "I" in Table 10) [See Microbiology (12.4)]	1000 mg every 6 hours

2.2 Dosage In Pediatric Patients

PRIMAXIN is not recommended in pediatric patients with CNS infections because of the risk of seizures [see Use in Specific Populations (8.4)].

PRIMAXIN is not recommended in pediatric patients <30 kg with renal impairment, as no data are available [see Use in Specific Populations (8.4)].

Based on studies in adults, the maximum total daily dose in pediatric patients should not exceed 4 g/day [see Dosage and Administration (2.1)].

The recommended dosage for pediatric patients with non-CNS infections is shown in Table 2 below:

2.3 Dosage In Adult Patients With Renal Impairment

Patients with creatinine clearance less than 90 mL/min require dosage reduction of PRIMAXIN as indicated in Table 3. The serum creatinine should represent a steady state of renal function. Use the Cockroft-Gault method described below to calculate the creatinine clearance:

In patients with creatinine clearances of less than 30 to greater than or equal to 15 mL/min, there may be an increased risk of seizures [see Warnings and Precautions (5.2) and Use in Specific Populations (8.6)]. Patients with creatinine clearance less than 15 mL/min should not receive PRIMAXIN unless hemodialysis is instituted within 48 hours. There is inadequate information to recommend usage of PRIMAXIN for patients undergoing peritoneal dialysis.

2.4 Dosage In Hemodialysis Patients

When treating patients with creatinine clearances of less than 15 mL/min who are undergoing hemodialysis, use the dosage recommendations for patients with creatinine clearances of less than 30 to greater than or equal to 15 mL/min in Table 3 above [see Dosage and Administration (2.3)]. Both imipenem and cilastatin are cleared from the circulation during hemodialysis. The patient should receive PRIMAXIN after hemodialysis and at intervals timed from the end of that hemodialysis session. Dialysis patients, especially those with background CNS disease, should be carefully monitored; for patients on hemodialysis, PRIMAXIN is recommended only when the benefit outweighs the potential risk of seizures. [See Warnings and Precautions (5.2)].

Other

PRIMAXIN Vials

• Do not use diluents containing benzyl alcohol to reconstitute PRIMAXIN for administration to neonates because it has been associated with toxicity in neonates. While toxicity has not been demonstrated in pediatric patients greater than three months of age, small pediatric patients in this age range may also be at risk for benzyl alcohol toxicity.
• Contents of the vials must be reconstituted by adding approximately 10 mL of the appropriate diluent to the vial. List of appropriate diluents are as follows:
  • 0.9% Sodium Chloride Injection
  • 5% or 10% Dextrose Injection
  • 5% Dextrose and 0.9% Sodium Chloride Injection
  • 5% Dextrose Injection with 0.225% or 0.45% saline solution
  • 5% Dextrose Injection with 0.15% potassium chloride solution
  • Mannitol 5% and 10%
  • Reconstituted Solutions of PRIMAXIN range from colorless to yellow. Variations of color within this range do not affect the potency of the product.
  • The reconstituted suspension must not be administered by direct Intravenous Infusion
  • After reconstitution, shake vial well and transfer the resulting suspension to 100 mL of an appropriate infusion solution before administering by intravenous infusion.
  • Repeat transfer of the resulting suspension with an additional 10 mL of infusion solution to ensure complete transfer of vial contents to the infusion solution. Agitate the resulting mixture until clear.
  • Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

  Vials (After Reconstitution)

  • PRIMAXIN, as supplied in single dose vials and reconstituted with the appropriate diluents [see Dosage and Administration (2.5)], maintains satisfactory potency for 4 hours at room temperature or for 24 hours under refrigeration (5°C). Do not freeze solutions of PRIMAXIN.

  Adult Patients

  During clinical investigations 1,723 patients were treated with PRIMAXIN. Table 4 shows the incidence of adverse reactions reported during the clinical investigations of adult patients treated with PRIMAXIN.

  Table 4: Incidence (%)

  Adverse reactions with an incidence ≥ 0.2% of PRIMAXIN-treated adult patients.

  of Adverse Reactions Reported During Clinical Investigations of Adult Patients Treated with PRIMAXIN

  Body System	Adverse Reactions	Frequency (%)
  Local Administration site	Phlebitis/thrombophlebitis	3.1%
  	Pain at the injection site	0.7%
  	Erythema at the injection site	0.4%
  	Vein induration	0.2%
  Gastrointestinal	Nausea	2.0%
  	Diarrhea	1.8%
  	Vomiting	1.5%
  Skin	Rash	0.9%
  	Pruritus	0.3%
  	Urticaria	0.2%
  Vascular	Hypotension	0.4%
  Body as a Whole	Fever	0.5%
  Nervous system	Seizures	0.4%
  	Dizziness	0.3%
  	Somnolence	0.2%

  Additional adverse reactions reported in less than 0.2% of the patients or reported since the drug was marketed are listed within each body system in order of decreasing severity (see Table 5).

  Table 5: Additional Adverse Reactions Occurring in Less than 0.2% of Adult Patients Listed within Each Body System in Order of Decreasing Severity

  Body System	Adverse Reactions
  Gastrointestinal	Pseudomembranous Colitis (the onset of Pseudomembranous colitis symptoms), Hemorrhagic Colitis
  	Gastroenteritis
  	Abdominal Pain
  	Glossitis
  	Tongue Papillar
  	Hypertrophy
  	Heartburn
  	Pharyngeal Pain
  	Increased Salivation
  CNS	Encephalopathy
  	Confusion
  	Myoclonus
  	Paresthesia
  	Vertigo
  	Headache
  Special Senses	Hearing Loss
  	Tinnitus
  Respiratory	Chest Discomfort
  	Dyspnea
  	Hyperventilation
  	Thoracic Spine Pain
  Cardiovascular	Palpitations
  	Tachycardia
  Skin	Erythema Multiforme
  	Angioneurotic Edema
  	Flushing
  	Cyanosis
  	Hyperhidrosis
  	Skin Texture Changes
  	Candidiasis
  	Pruritus Vulvae
  Local Administration site	Infused vein infection
  Body as a Whole	Polyarthralgia
  	Asthenia/Weakness
  Renal	Oliguria/Anuria
  	Polyuria

  Adverse Laboratory Changes

  The following adverse laboratory changes were reported during clinical trials:

  Hepatic: Increased alanine aminotransferase (ALT or SGPT), aspartate aminotransferase (AST or SGOT), alkaline phosphatase, bilirubin, and lactate dehydrogenase (LDH)

  Hemic: Increased eosinophils, positive Coombs test, increased WBC, increased platelets, decreased hemoglobin and hematocrit, increased monocytes, abnormal prothrombin time, increased lymphocytes, increased basophils

  Electrolytes: Decreased serum sodium, increased potassium, increased chloride

  Renal: Increased BUN, creatinine

  Urinalysis: Presence of urine protein, urine red blood cells, urine white blood cells, urine casts, urine bilirubin, and urine urobilinogen.

  Pediatric Patients

  Table 6: Incidence (%)

  Adverse reactions that occurred in >1 % of PRIMAXIN-treated pediatric patients (greater than or equal to 3 months of age)

  of Adverse Reactions Reported During Clinical Investigations of Pediatric Patients Greater Than or Equal to 3 Months of Age Treated with PRIMAXIN

  Body System	Adverse Reactions	Frequency (%)
  Local Administration Site	Phlebitis	2.2%
  	Intravenous Site Irritation	1.1%
  Gastrointestinal	Diarrhea	3.9%
  	Gastroenteritis	1.1%
  	Vomiting	1.1%
  Skin	Rash	2.2%
  Renal	Urine Discoloration	1.1%

  Table 7: Incidence (%)

  Adverse reactions that occurred in >1 % of PRIMAXIN-treated pediatric patients (neonates to 3 months of age)

  of Adverse Reactions Reported During Clinical Investigations of Pediatric Patients Neonates to 3 Months of Age Treated with PRIMAXIN

  Body System	Adverse Reactions	Frequency (%)
  Gastrointestinal	Diarrhea	3%
  CNS	Convulsions	5.9%
  Cardiovascular	Tachycardia	1.5%
  Skin	Rash	1.5%
  Body as a Whole	Oral Candidiasis	1.5%
  Renal	Oliguria/Anuria	2.2%

  Adverse Laboratory Changes

  The following adverse laboratory changes were reported in studies of 178 pediatric patients 3 months of age: increased AST (SGOT), decreased hemoglobin/hematocrit, increased platelets, increased eosinophils, increased ALT (SGPT), increased urine protein, decreased neutrophils.

  The following adverse laboratory changes were reported in studies of 135 patients (neonates to 3 months of age): increased eosinophils, increased AST (SGPT), increased serum creatinine, increased/decreased platelet count, increased/decreased bilirubin, increased ALT (SGPT), increased alkaline phosphatase, increased/decreased hematocrit.

  Adverse Laboratory Changes

  Adverse laboratory changes reported since the drug was marketed were:

  Hematologic: agranulocytosis.

  Examination of published literature and spontaneous adverse reactions reports suggested a similar spectrum of adverse reactions in adult and pediatric patients.

  Pregnancy Category C:

  There are no adequate and well-controlled studies of PRIMAXIN in pregnant women. PRIMAXIN should be used during pregnancy only if the potential benefit justifies the potential risk to the mother and fetus.

  Developmental toxicity studies with imipenem and cilastatin sodium (alone or in combination) administered to monkeys, rabbits, rats, and mice revealed no evidence of teratogenicity. Imipenem was administered intravenously to rabbits and rats at doses up to 60 and 900 mg/kg/day, respectively, up to approximately 0.4 and 2.9 time the maximum recommended human daily dose as a component of PRIMAXIN, based on body surface area. Cilastatin sodium was given intravenously to rabbits at doses up to 300 mg/kg/day and to rats subcutaneously at doses up to 1000 mg/kg/day, up to approximately 1.9 and 3.2 times the maximum recommended human daily dose as a component of PRIMAXIN, based on body surface area. Imipenem-cilastatin sodium was given intravenously at doses up to 80 mg/kg/day and subcutaneously at doses up to 320 mg/kg/day to mice and rats (the higher dose is approximately equal to the highest recommended human daily dose based on body surface area). Intravenous doses of imipenem-cilastatin sodium at approximately 100 mg/kg/day (0.6 times the maximum recommended human daily dose, based on body surface area) administered to pregnant cynomolgus monkeys at an infusion rate mimicking human clinical use were not associated with teratogenicity, but there was an increase in embryonic loss relative to controls. However, an imipenem-cilastatin dose of 40 mg/kg given to pregnant cynomolgus monkeys by bolus intravenous injection caused significant maternal toxicity including death and embryofetal loss.

  No adverse effects on the fetus or on lactation were observed when imipenem-cilastatin sodium was administered subcutaneously to rats late in gestation at dosages up to 320 mg/kg/day, approximately equal to the highest recommended human dose (based on body surface area). Although a slight decrease in live fetal body weight was observed at the high dose, there were no adverse effects on fetal viability, growth or postnatal development of pups.

  Distribution

  The binding of imipenem to human serum proteins is approximately 20% and that of cilastatin is approximately 40%.

  Imipenem has been shown to penetrate into human tissues, including vitreous humor, aqueous humor, lung, peritoneal fluid, CSF, bone, interstitial fluid, skin, and fascia. As there are no adequate and well-controlled studies of imipenem treatment in these additional body sites, the clinical significance of these tissue concentration data is unknown.

  After a 1 gram dose of PRIMAXIN, the following average levels of imipenem were measured (usually at 1 hour post dose except where indicated) in the tissues and fluids listed in Table 9:

  Table 9: Average Levels of Imipenem

  Tissue or Fluid	N	Imipenem Level mcg/mL or mcg/g	Range
  Vitreous Humor	3	3.4 (3.5 hours post dose)	2.88–3.6
  Aqueous Humor	5	2.99 (2 hours post dose)	2.4–3.9
  Lung Tissue	8	5.6 (median)	3.5–15.5
  Sputum	1	2.1	—
  Pleural	1	22.0	—
  Peritoneal	12	23.9 S.D.±5.3 (2 hours post dose)	—
  Bile	2	5.3 (2.25 hours post dose)	4.6–6.0
  CSF (uninflamed)	5	1.0 (4 hours post dose)	0.26–2.0
  CSF (inflamed)	7	2.6 (2 hours post dose)	0.5–5.5
  Fallopian Tubes	1	13.6	—
  Endometrium	1	11.1	—
  Myometrium	1	5.0	—
  Bone	10	2.6	0.4–5.4
  Interstitial Fluid	12	16.4	10.0–22.6
  Skin	12	4.4	NA
  Fascia	12	4.4	NA

  Metabolism

  Imipenem, when administered alone, is metabolized in the kidneys by dehydropeptidase I, resulting in relatively low levels in urine. Cilastatin sodium, an inhibitor of this enzyme, effectively prevents renal metabolism of imipenem so that when imipenem and cilastatin sodium are given concomitantly, adequate antibacterial levels of imipenem are achieved in the urine.

  Elimination

  The plasma half-life of each component is approximately 1 hour. Approximately 70% of the administered imipenem is recovered in the urine within 10 hours after which no further urinary excretion is detectable. Urine concentrations of imipenem in excess of 10 mcg/mL can be maintained for up to 8 hours with PRIMAXIN at the 500-mg dose. Approximately 70% of the cilastatin sodium dose is recovered in the urine within 10 hours of administration of PRIMAXIN. Imipenem-cilastatin sodium is hemodialyzable [see Overdosage (10)].

  No accumulation of imipenem/cilastatin in plasma or urine is observed with regimens administered as frequently as every 6 hours in patients with normal renal function.

  Specific Populations

  Geriatric Patients

  In healthy elderly volunteers (65 to 75 years of age with normal renal function for their age), the pharmacokinetics of a single dose of imipenem 500 mg and cilastatin 500 mg administered intravenously over 20 minutes are consistent with those expected in subjects with slight renal impairment for which no dosage alteration is considered necessary. The mean plasma half-lives of imipenem and cilastatin are 91 ± 7 minutes and 69 ± 15 minutes, respectively. Multiple dosing has no effect on the pharmacokinetics of either imipenem or cilastatin, and no accumulation of imipenem/cilastatin is observed.

  Pediatric Patients

  Doses of 25 mg/kg/dose in patients 3 months to <3 years of age, and 15 mg/kg/dose in patients 3-12 years of age were associated with mean trough plasma concentrations of imipenem of 1.1±0.4 mcg/mL and 0.6±0.2 mcg/mL following multiple 60-minute infusions, respectively; trough urinary concentrations of imipenem were in excess of 10 mcg/mL for both doses. These doses have provided adequate plasma and urine concentrations for the treatment of non-CNS infections.

  In a dose-ranging study of smaller premature infants (670-1,890 g) in the first week of life, a dose of 20 mg/kg q12h by 15-30 minutes infusion was associated with mean peak and trough plasma imipenem concentrations of 43 mcg/mL and 1.7 mcg/mL after multiple doses, respectively. However, moderate accumulation of cilastatin in neonates may occur following multiple doses of PRIMAXIN. The safety of this accumulation is unknown.

  Mechanism of Action

  PRIMAXIN is a combination of imipenem and cilastatin. The bactericidal activity of imipenem results from the inhibition of cell wall synthesis. Its greatest affinity is for penicillin binding proteins (PBPs) 1A, 1B, 2, 4, 5 and 6 of Escherichia coli, and 1A, 1B, 2, 4 and 5 of Pseudomonas aeruginosa. The lethal effect is related to binding to PBP 2 and PBP 1B.

  Imipenem has a high degree of stability in the presence of beta-lactamases, both penicillinases and cephalosporinases produced by Gram-negative and Gram-positive bacteria. It is a potent inhibitor of beta-lactamases from certain Gram-negative bacteria which are inherently resistant to most beta-lactam antibacterials, e.g., Pseudomonas aeruginosa, Serratia spp., and Enterobacter spp.

  Resistance

  Imipenem is inactive in vitro against Enterococcus faecium, Stenotrophomonas maltophilia and some isolates of Burkholderia cepacia. Methicillin-resistant staphylococci should be reported as resistant to imipenem.

  Interaction with Other Antimicrobials

  In vitro tests show imipenem to act synergistically with aminoglycoside antibacterials against some isolates of Pseudomonas aeruginosa.

  Antimicrobial Activity

  Imipenem has been shown to be active against most isolates of the following microorganisms, both in vitro and in clinical infections [see Indications and Usage (1.1)].

  Aerobic bacteria

  Gram-positive bacteria

  •  Enterococcus faecalis
  •  Staphylococcus aureus
  •  Staphylococcus epidermidis
  •  Streptococcus agalactiae (Group B streptococci)
  •  Streptococcus pneumoniae
  •  Streptococcus pyogenes

  Gram-negative bacteria

  •  Acinetobacter spp.
  •  Citrobacter spp.
  •  Enterobacter spp.
  •  Escherichia coli
  •  Gardnerella vaginalis
  •  Haemophilus influenzae
  •  Haemophilus parainfluenzae
  •  Klebsiella spp.
  •  Morganella morganii
  •  Proteus vulgaris
  •  Providencia rettgeri
  •  Pseudomonas aeruginosa
  •  Serratia spp., including S. marcescens

  Anaerobic bacteria

  Gram positive bacteria

  •  Bifidobacterium spp.
  •  Clostridium spp.
  •  Eubacterium spp.
  •  Peptococcus spp.
  •  Peptostreptococcus spp.
  •  Propionibacterium spp.

  Gram-negative bacteria

  •  Bacteroides spp., including B. fragilis
  •  Fusobacterium spp.

  The following in vitro data are available, but their clinical significance is unknown. At least 90 percent of the following bacteria exhibit an in vitro minimum inhibitory concentration (MIC) less than or equal to the susceptible breakpoint for imipenem against isolates of similar genus or organism group. However, the efficacy of imipenem in treating clinical infections due to these bacteria has not been established in adequate and well-controlled clinical trials.

  Aerobic bacteria

  Gram-positive bacteria

  •  Bacillus spp.
  •  Listeria monocytogenes
  •  Nocardia spp.
  •  Staphylococcus saprophyticus
  •  Group C streptococci
  •  Group G streptococci
  •  Viridans group streptococci

  Gram-negativebacteria

  •  Aeromonas hydrophila
  •  Alcaligenes spp.
  •  Capnocytophaga spp.
  •  Haemophilus ducreyi
  •  Neisseria gonorrhoeae
  •  Pasteurella spp.
  •  Providencia stuartii

  Anaerobic bacteria

  •  Prevotella bivia
  •  Prevotella disiens
  •  Prevotella melaninogenica
  •  Veillonella spp.

  Susceptibility Test Methods

  When available, the clinical microbiology laboratory should provide cumulative reports of in vitro susceptibility tests results for antimicrobial drugs used in local hospitals and practice areas to the physician as periodic reports that describe the susceptibility profile of nosocomial and community-acquired pathogens. These reports should aid the physician in selecting an antibacterial drug for treatment.

  Dilution Techniques:

  Quantitative methods are used to determine antimicrobial MICs. These MICs provide estimates of the susceptibility of bacteria to antimicrobial compounds. The MICs should be determined using a standardized test method (broth and/or agar).^1,2 The MIC values should be interpreted according to breakpoints provided in Table 10.

  Diffusion Techniques:

  Quantitative methods that require measurement of zone diameters can also provide reproducible estimates of the susceptibility of bacteria to antimicrobial compounds. The zone size should be determined using a standardized test method.^2,3 This procedure uses paper disks impregnated with 10-mcg of imipenem to test the susceptibility of bacteria to imipenem. The disk diffusion breakpoints are provided in Table 10.

  Anaerobic Techniques:

  For anaerobic bacteria, the susceptibility to imipenem can be determined by a standardized test method.⁴ The MIC values obtained should be interpreted according to the breakpoints provided in Table 10.

  Table 10: Susceptibility Test Interpretive Criteria for Imipenem

  Interpretive criteria are based on a dosing regimen of 500 mg every 6 hours or 1000 mg every 8 hours.

  	Minimum Inhibitory Concentrations MIC (mcg/mL)			Disk Diffusion (zone diameters in mm)
  Pathogen	S	I	R	S	I	R
  Susceptibility of staphylococci to imipenem may be deduced from testing penicillin and either cefoxitin or oxacillin.2
  Enterobacteriaceae	≤1	2 Use 1000 mg every 6 hours for bacteria with intermediate susceptibility in patients with creatinine clearance greater than or equal to 90 mL/min.	≥4	≥23	20-22	≤19
  Pseudomonas aeruginosa	≤2	4	≥8	≥19	16-18	≤15
  Acinetobacter spp.	≤2	4	≥8	≥22	19-21	≤18
  Haemophilus influenza and H. parainfluenzae The current absence of data on resistant isolates precludes defining any category other than 'Susceptible'. If isolates yield MIC results other than susceptible, they should be submitted to a reference laboratory for additional testing.	≤4	-	-	≥16	-	-
  Streptococcus pneumoniae For non-meningitis S. pneumoniae isolates, penicillin MICs ≤0.06 mcg/mL (or oxacillin zones ≥20 mm) indicate susceptibility to imipenem.	≤0.12	0.25-0.5	≥1	-	-	-
  Anaerobes	≤4	8	≥16	-	-	-

  A report of "Susceptible" (S) indicates that the antimicrobial drug is likely to inhibit growth of the pathogen if the antimicrobial drug reaches the concentration usually achievable at the site of infection. A report of "Intermediate" (I) indicates that the result should be considered equivocal, and, if the microorganism is not fully susceptible to alternative clinically feasible drugs, the test should be repeated. This category implies possible clinical applicability in body sites where the drug is physiologically concentrated or in situations where a high dosage of the drug can be used. This category also provides a buffer zone that prevents small uncontrolled technical factors from causing major discrepancies in interpretation. A report of "Resistant" (R) indicates that the antimicrobial drug is not likely to inhibit growth of the pathogen if the antimicrobial drug reaches the concentrations usually achievable at the infection site; other therapy should be selected.

  Quality Control

  Standardized susceptibility test procedures require the use of laboratory controls to monitor and ensure the accuracy and precision of supplies and reagents used in the assay, and the techniques of the individuals performing the test.^1,2,3,4 Standard imipenem powder should provide the following range of MIC values noted in Table 11. For the diffusion technique using the 10 mcg disk, the criteria in Table 11 should be achieved.

  Table 11: Acceptable Quality Control Ranges for Imipenem

  Microorganism	Minimum Inhibitory Concentrations (mcg/mL)	Disk Diffusion (zone diameters in mm)
  Bacteroides fragilis ATCC 25285 Quality control ranges for agar dilution testing	0.03-0.125 0.03 – 0.25 Quality control ranges for broth microdilution testing	-
  Bacteroides thetaiotaomicron ATCC 29741	0.125-0.5 0.25 – 1.0	-
  Eggerthella lenta ATCC 43055	0.125-0.5 0.25 – 2.0	-
  Enterococcus faecalis ATCC 29212	0.5-2	-
  Escherichia coli ATCC 25922	0.06-0.25	26-32
  Haemophilus influenzae ATCC 49247	-	21-29
  Haemophilus influenzae ATCC 49766	0.25-1	-
  Staphylococcus aureus ATCC 29213	0.015-0.06	-
  Pseudomonas aeruginosa ATCC 27853	1-4	20-28
  Streptococcus pneumoniae ATCC 49619	0.03-0.12	-

  Before Reconstitution:

  The dry powder should be stored at a temperature below 25°C (77°F).

  Merck Sharp & Dohme Corp., a subsidiary
  MERCK & CO., INC., Whitehouse Station, NJ 08889, USA

  Copyright © 2016 Merck Sharp & Dohme Corp., a subsidiary of Merck & Co., Inc.
  All rights reserved.

  uspi-mk0787B-iv-1712r040

  
  

2.7 Incompatibility And Compatibility Of Primaxin With Other Antibacterial Drugs

• Do not mix PRIMAXIN with, or physically add to, other antibacterial drugs
• PRIMAXIN may be administered concomitantly with other antibacterial drugs, such as aminoglycosides.

3 Dosage Forms And Strengths

For Injection PRIMAXIN is a sterile powder mixture for reconstitution in single-dose containers including vials containing:

• 500 mg imipenem (anhydrous equivalent) and 500 mg cilastatin sodium

4 Contraindications

PRIMAXIN is contraindicated in patients who have shown hypersensitivity to any component of this product.

5.1 Hypersensitivity Reactions

Serious and occasionally fatal hypersensitivity (anaphylactic) reactions have been reported in patients receiving therapy with beta-lactams. These reactions are more likely to occur in individuals with a history of sensitivity to multiple allergens. There have been reports of individuals with a history of penicillin hypersensitivity who have experienced severe hypersensitivity reactions when treated with another beta-lactam. Before initiating therapy with PRIMAXIN, careful inquiry should be made concerning previous hypersensitivity reactions to penicillins, cephalosporins, other beta-lactams and other allergens. If an allergic reaction to PRIMAXIN occurs, discontinue the drug immediately. Serious anaphylactic reactions require immediate emergency treatment as clinically indicated.

5.2 Seizure Potential

Seizures and other CNS adverse experiences, such as confusional states and myoclonic activity, have been reported during treatment with PRIMAXIN, especially when recommended dosages were exceeded [see Adverse Reactions (6.1, 6.2)]. These experiences have occurred most commonly in patients with CNS disorders (e.g., brain lesions or history of seizures) and/or compromised renal function [see Use in Specific Populations (8.6)]. However, there have been reports of CNS adverse experiences in patients who had no recognized or documented underlying CNS disorder or compromised renal function.

Anticonvulsant therapy should be continued in patients with known seizure disorders. If focal tremors, myoclonus, or seizures occur, patients should be evaluated neurologically, placed on anticonvulsant therapy if not already instituted, and the dosage of PRIMAXIN re-examined to determine whether it should be decreased or the antibacterial drug discontinued.

5.3 Increased Seizure Potential Due To Interaction With Valproic Acid

Case reports in the literature have shown that co-administration of carbapenems, including PRIMAXIN, to patients receiving valproic acid or divalproex sodium results in a reduction in valproic acid concentrations. The valproic acid concentrations may drop below the therapeutic range as a result of this interaction, therefore increasing the risk of breakthrough seizures. Increasing the dose of valproic acid or divalproex sodium may not be sufficient to overcome this interaction. The concomitant use of PRIMAXIN and valproic acid/divalproex sodium is generally not recommended. Antibacterials other than carbapenems should be considered to treat infections in patients whose seizures are well controlled on valproic acid or divalproex sodium. If administration of PRIMAXIN is necessary, supplemental anti-convulsant therapy should be considered [see Drug Interactions (7.3)]. Close adherence to the recommended dosage and dosage schedules is urged, especially in patients with known factors that predispose to convulsive activity.

5.4 Clostridium Difficile-Associated Diarrhea (Cdad)

Clostridium difficile associated diarrhea (CDAD) has been reported with use of nearly all antibacterial agents, including PRIMAXIN, and may range in severity from mild diarrhea to fatal colitis. Treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of C. difficile.

C. difficile produces toxins A and B which contribute to the development of CDAD.

Hypertoxin producing strains of C. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibacterial drug use. Careful medical history is necessary since CDAD has been reported to occur over two months after the administration of antibacterial agents.

If CDAD is suspected or confirmed, ongoing antibacterial drug use not directed against C. difficile may need to be discontinued. Appropriate fluid and electrolyte management, protein supplementation, antibacterial drug treatment of C. difficile, and surgical evaluation should be instituted as clinically indicated.

5.5 Development Of Drug-Resistant Bacteria

As with other antibacterial drugs, prolonged use of PRIMAXIN may result in overgrowth of nonsusceptible organisms. Repeated evaluation of the patient's condition is essential. If superinfection occurs during therapy, appropriate measures should be taken.

Prescribing PRIMAXIN in the absence of a proven or strongly suspected bacterial infection or a prophylactic indication is unlikely to provide benefit to the patient and increases the risk of the development of drug-resistant bacteria.

6 Adverse Reactions

The following serious adverse reactions are described in greater detail in the Warnings and Precautions section.

• Hypersensitivity Reactions [see Warnings and Precautions (5.1)]
• Seizure Potential [see Warnings and Precautions (5.2)]
• Increased Seizure Potential Due to Interaction with Valproic Acid [see Warnings and Precautions (5.3)]
• Clostridium difficile-Associated Diarrhea (CDAD) [see Warnings and Precautions (5.4)]
• Development of Drug-Resistant Bacteria [see Warnings and Precautions (5.5)]

6.1 Clinical Trials Experience

Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice.

6.2 Postmarketing Experience

The following adverse reactions have been identified during post-approval use of PRIMAXIN. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure.

7.1 Ganciclovir

Generalized seizures have been reported in patients who received ganciclovir and PRIMAXIN. These drugs should not be used concomitantly with PRIMAXIN unless the potential benefits outweigh the risks.

7.2 Probenecid

Concomitant administration of PRIMAXIN and probenecid results in increases in the plasma level and half-life of imipenem. Therefore, it is not recommended that probenecid be given concomitantly with PRIMAXIN.

7.3 Valproic Acid

Case reports in the literature have shown that co-administration of carbapenems, including PRIMAXIN, to patients receiving valproic acid or divalproex sodium results in a reduction in valproic acid concentrations. The valproic acid concentrations may drop below the therapeutic range as a result of this interaction, therefore increasing the risk of breakthrough seizures. Although the mechanism of this interaction is unknown, data from in vitro and animal studies suggest that carbapenems may inhibit the hydrolysis of valproic acid's glucuronide metabolite (VPA-g) back to valproic acid, thus decreasing the serum concentrations of valproic acid [see Warnings and Precautions (5.3)]. The concomitant use of PRIMAXIN and valproic acid/divalproex sodium is generally not recommended. Antibacterials other than carbapenems should be considered to treat infections in patients whose seizures are well-controlled on valproic acid or divalproex sodium.

8.3 Nursing Mothers

It is not known whether imipenem-cilastatin sodium is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when PRIMAXIN is administered to a nursing woman.

8.4 Pediatric Use

Use of PRIMAXIN in pediatric patients is supported by evidence from adequate and well-controlled trials of PRIMAXIN in adults and clinical studies in pediatric patients [see Dosage and Administration (2.2) and Clinical Pharmacology (12.3)].

PRIMAXIN is not recommended in pediatric patients with CNS infections because of the risk of seizures.

PRIMAXIN is not recommended in pediatric patients less than 30 kg with renal impairment, as no data are available.

8.5 Geriatric Use

Of the approximately 3600 subjects ≥18 years of age in clinical studies of PRIMAXIN, including postmarketing studies, approximately 2800 received PRIMAXIN. Of the subjects who received PRIMAXIN, data are available on approximately 800 subjects who were 65 and over, including approximately 300 subjects who were 75 and over. No overall differences in safety or effectiveness were observed between these subjects and younger subjects. Other reported clinical experience has not identified differences in responses between the elderly and younger patients, but greater sensitivity of some older individuals cannot be ruled out.

This drug is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function.

No dosage adjustment is required based on age [see Clinical Pharmacology (12.3)]. Dosage adjustment in the case of renal impairment is necessary [see Dosage and Administration (2.3)].

8.6 Renal Impairment

Dosage adjustment is necessary in patients with renal impairment [see Dosage and Administration (2.3)]. Adult patients with creatinine clearances of less than or equal to 30 mL/min, whether or not undergoing hemodialysis, had a higher risk of seizure activity than those without impairment of renal function [see Warnings and Precautions (5.2)]. Therefore, close adherence to the dosing guidelines and regular monitoring of creatinine clearance for these patients is recommended.

10 Overdosage

In the case of overdosage, discontinue PRIMAXIN, treat symptomatically, and institute supportive measures as required. PRIMAXIN is hemodialyzable.

11 Description

PRIMAXIN (imipenem and cilastatin) for Injection is a sterile formulation of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor with sodium bicarbonate added as a buffer. PRIMAXIN is an antibacterial drug for intravenous administration.

Imipenem (N-formimidoylthienamycin monohydrate) is a crystalline derivative of thienamycin, which is produced by Streptomyces cattleya. Its chemical name is (5R,6S)-3-[[2-(formimidoylamino)ethyl]thio]-6-[(R)-1-hydroxyethyl]-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monohydrate. It is an off-white, nonhygroscopic crystalline compound with a molecular weight of 317.37. It is sparingly soluble in water and slightly soluble in methanol. Its empirical formula is C₁₂H₁₇N₃O₄S∙H₂O, and its structural formula is:

Chemical Structure - primaxin iv 01

Cilastatin sodium is the sodium salt of a derivatized heptenoic acid. Its chemical name is sodium (Z)-7[[(R)-2-amino-2-carboxyethyl]thio]-2-[(S)-2,2-dimethylcyclopropanecarboxamido]-2-heptenoate. It is an off-white to yellowish-white, hygroscopic, amorphous compound with a molecular weight of 380.43. It is very soluble in water and in methanol. Its empirical formula is C₁₆H₂₅N₂O₅SNa, and its structural formula is:

PRIMAXIN is buffered to provide solutions in the pH range of 6.5 to 8.5. There is no significant change in pH when solutions are prepared and used as directed. [See How Supplied/ Storage and Handling (16.1).] PRIMAXIN 500 contains 37.5 mg of sodium (1.6 mEq). Solutions of PRIMAXIN range from colorless to yellow. Variations of color within this range do not affect the potency of the product.

12.1 Mechanism Of Action

PRIMAXIN is a combination of imipenem and cilastatin. Imipenem is a penem antibacterial drug [see Microbiology (12.4)]. Cilastatin sodium is a renal dehydropeptidase inhibitor that limits the renal metabolism of imipenem.

12.3 Pharmacokinetics

Intravenous infusion of PRIMAXIN over 20 minutes results in peak plasma levels of imipenem antimicrobial activity that range from 21 to 58 mcg/mL for the 500 mg dose, and from 41 to 83 mcg/mL for the 1000 mg dose. At these doses, plasma levels of imipenem antimicrobial activity decline to below 1 mcg/mL or less in 4 to 6 hours. Peak plasma levels of cilastatin following a 20-minute intravenous infusion of PRIMAXIN range from 31 to 49 mcg/mL for the 500 mg dose, and from 56 to 88 mcg/mL for the 1000 mg dose.

13.1 Carcinogenesis, Mutagenesis, Impairment Of Fertility

Long term studies in animals have not been performed to evaluate carcinogenic potential of imipenem-cilastatin. A variety of bacterial and mammalian tests were performed to evaluate genetic toxicity. The tests used were: V79 mammalian cell mutagenesis assay (cilastatin sodium alone and imipenem alone), Ames test (cilastatin sodium alone and imipenem alone), unscheduled DNA synthesis assay (imipenem-cilastatin sodium) and in vivo mouse cytogenetics test (imipenem-cilastatin sodium). None of these tests showed any evidence of genetic alterations.

Impairment of fertility or reproductive performance was not observed in male and female rats given imipenem-cilastatin at intravenous doses up to 80 mg/kg/day and at a subcutaneous dose of 320 mg/kg/day. In rats, a dose of 320 mg/kg/day was approximately equal to the highest recommended human dose based on body surface area.

15 References

• Clinical and Laboratory Standards Institute (CLSI). Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria that Grow Aerobically; Approved Standard - Tenth Edition. CLSI document M07-A10, Clinical and Laboratory Standards Institute, 950 West Valley Road, Suite 2500, Wayne, Pennsylvania 19087, USA, 2015.
• Clinical and Laboratory Standards Institute (CLSI). Performance Standards for Antimicrobial Susceptibility Testing; Twenty-sixth Informational Supplement, CLSI document M100-S26, Clinical and Laboratory Standards Institute, 950 West Valley Road, Suite 2500, Wayne, Pennsylvania 19087, USA, 2016.
• Clinical and Laboratory Standards Institute (CLSI). Performance Standards for Antimicrobial Disk Diffusion Susceptibility Tests; Approved Standard – Twelfth Edition. CLSI document M02-A12, Clinical and Laboratory Standards Institute, 950 West Valley Road, Suite 2500, Wayne, Pennsylvania 19087, USA, 2015.
• Clinical and Laboratory Standards Institute (CLSI). Methods for Antimicrobial Susceptibility Testing of Anaerobic Bacteria; Approved Standard – Eighth Edition. CLSI document M11-A8 Clinical and Laboratory Standards Institute, 950 West Valley Road, Suite 2500, Wayne, Pennsylvania 19087, USA 2012.

16.1 How Supplied

PRIMAXIN is supplied as a sterile powder mixture in single dose containers including vials containing imipenem (anhydrous equivalent) and cilastatin sodium as follows:

17 Patient Counseling Information

Advise the patient to read the FDA-approved patient labeling (Instructions for Use).

• Advise patients that allergic reactions, including serious allergic reactions, could occur and that serious reactions require immediate treatment. They should report any previous hypersensitivity reactions to PRIMAXIN, other carbapenems, beta-lactams or other allergens.
• Counsel patients that antibacterial drugs including PRIMAXIN should only be used to treat bacterial infections. They do not treat viral infections (e.g., the common cold). When PRIMAXIN is prescribed to treat a bacterial infection, patients should be told that although it is common to feel better early in the course of therapy, the medication should be taken exactly as directed. Skipping doses or not completing the full course of therapy may (1) decrease the effectiveness of the immediate treatment and (2) increase the likelihood that bacteria will develop resistance and will not be treatable by PRIMAXIN or other antibacterial drugs in the future.
• Counsel patients to inform their physician:
  • if they have central nervous system disorders such as stroke or history of seizures. Seizures have been reported during treatment with PRIMAXIN and with closely related antibacterial drugs.
  • if they are taking valproic acid or sodium valproate. Valproic acid concentrations in the blood may drop below the therapeutic range upon co-administration with PRIMAXIN. If treatment with PRIMAXIN is necessary and continued, alternative or supplemental anti-convulsant medication to prevent and/or treat seizures may be needed.
  • Advise patients that diarrhea is a common problem caused by antibacterial drugs and usually resolves when the drug is discontinued. Sometimes, frequent watery or bloody diarrhea may occur and may be a sign of a more serious intestinal infection. If severe watery or bloody diarrhea develops, patients should contact their healthcare provider.
  
  

Principal Display Panel 250 Mg Bottle Label

NDC 0006-3514-58

250
PRIMAXIN^® I.V.
(IMIPENEM AND CILASTATIN FOR INJECTION)

IMIPENEM 250 mg (Anhydrous Equivalent)
CILASTATIN EQUIVALENT 250 mg
CAUTION: SINGLE DOSE VIAL / FOR I.V. USE ONLY
NOT FOR DIRECT INFUSION

Rx only
250 mg

Merck Sharp & Dohme Corp., a subsidiary of
MERCK & CO., INC., Whitehouse Station, NJ 08889, USA

3514

PRINCIPAL DISPLAY PANEL 250 mg Bottle Label - primaxin iv 03

Principal Display Panel 500 Mg Bottle Label

NDC 0006-3516-59

500
PRIMAXIN^® I.V.
(IMIPENEM AND CILASTATIN FOR INJECTION)

IMIPENEM 500 mg (Anhydrous Equivalent)
CILASTATIN EQUIVALENT 500 mg
CAUTION: SINGLE DOSE VIAL / FOR I.V. USE ONLY
NOT FOR DIRECT INFUSION

Rx only
500 mg

Merck Sharp & Dohme Corp., a subsidiary of
MERCK & CO., INC., Whitehouse Station, NJ 08889, USA

3516

PRINCIPAL DISPLAY PANEL 500 mg Bottle Label - primaxin iv 04

Principal Display Panel - Single-Dose Add-Vantage Vial 250 Mg

NDC 0006-3551-58

Single-dose ADD-Vantage^® vial

250

PRIMAXIN^® I.V.

(IMIPENEM AND CILASTATIN FOR INJECTION)

IMIPENEM 250 mg (Anhydrous Equivalent)
CILASTATIN EQUIVALENT 250 mg

CAUTION: SINGLE DOSE VIAL / FOR I.V. USE ONLY
NOT FOR DIRECT INFUSION

PRIMAXIN is a registered trademark of Merck Sharp & Dohme Corp.

ADD-Vantage is a registered trademark of ABBOTT LABORATORIES, Inc.

9960800

For the Preparation of Intravenous Solutions and USUAL ADULT DOSAGE: See accompanying circular.

Store dry material below 25°C.

After constitution as directed, the solution maintains satisfactory potency for 4 hours at room temperature.

Consult accompanying INSTRUCTIONS FOR USE.

Use only with ADD-Vantage^® Diluent Containers.

Rx only

250 mg | No. 3551

Merck Sharp & Dohme Corp., a subsidiary of
MERCK & CO., INC.
Whitehouse Station, NJ 08889, USA

Single-Dose ADD-Vantage Vial 250 mg - primaxin iv 05

Principal Display Panel - Single-Dose Add-Vantage Vial 500 Mg

NDC 0006-3552-59

Single-dose ADD-Vantage^® vial

500

PRIMAXIN^® I.V.

(IMIPENEM AND CILASTATIN FOR INJECTION)

IMIPENEM 500 mg (Anhydrous Equivalent)
CILASTATIN EQUIVALENT 500 mg

CAUTION: SINGLE DOSE VIAL / FOR I.V. USE ONLY
NOT FOR DIRECT INFUSION

PRIMAXIN is a registered trademark of Merck Sharp & Dohme Corp.

ADD-Vantage is a registered trademark of ABBOTT LABORATORIES, Inc.

9940700

For the Preparation of Intravenous Solutions and USUAL ADULT DOSAGE: See accompanying circular.

Store dry material below 25°C.

After constitution as directed, the solution maintains satisfactory potency for 4 hours at room temperature.

Consult accompanying INSTRUCTIONS FOR USE.

Use only with ADD-Vantage^® Diluent Containers.

Rx only

500 mg | No. 3552

Merck Sharp & Dohme Corp., a subsidiary of
MERCK & CO., INC.
Whitehouse Station, NJ 08889, USA

Single-Dose ADD-Vantage Vial 500 mg - primaxin iv 06