Enbrel Solution
Product Images NDC 58406-010

Product Visual Gallery

This gallery contains 223 technical images submitted to the FDA as part of the official labeling for Enbrel (NDC 58406-010). Unlike standard consumer photos, these assets often include clinical data figures, molecular chemical structures, and official manufacturer packaging layouts.

As provided by Immunex Corporation, these visuals offer a comprehensive scientific overview of the product's physical and chemical identity, aiding pharmacists and researchers in product verification and study.

FDA Label Image

Figure 1 (Enbrel 01)

A line graph titled 'Time Course of ACR 20 Responses' showing percent responding over six months. It compares placebo groups from two studies with 25 mg Enbrel groups, including one with methotrexate (MTX), illustrating response rates over time.*

FDA Label Image

Figure 2 (Enbrel 02)

A line graph depicting the percent responding over 24 weeks for two groups: etanercept and placebo. The x-axis represents weeks from baseline to 24, and the y-axis shows percent responding from 0 to 100. The etanercept group shows a higher percentage response over time compared to placebo.*

FDA Label Image

Image (Enbrel 03)

FDA Label Image

Image (Enbrel 04)

FDA Label Image

Figure (Enbrel 05)

Illustration of an ENBREL prefilled syringe showing labeled parts including a purple start button, expiration date, a window to view the medicine inside, a white cap on the end, and a green safety guard covering the needle. The syringe is associated with Immunex Corporation and available in 25 mg/.5 mL and 50 mg/mL strengths.*

FDA Label Image

Figure (Enbrel 06)

An illustrated diagram of an ENBREL prefilled syringe highlighting features such as the expiration date area near the top, a yellow window indicating when injection is complete, a green safety guard covering the needle, and a white cap shown off separately at the bottom.*

FDA Label Image

Figure (Enbrel 07)

An instructional diagram of an ENBREL prefilled syringe showing labeled parts including green safety guard containing the needle, white cap, a window to view the medicine, and the medicine inside the syringe barrel.*

FDA Label Image

Figure (Enbrel 08)

Illustration showing components of the ENBREL injection system by Immunex Corporation, including a prefilled pen injector, alcohol prep pad, three cotton balls, an adhesive bandage, and a red sharps disposal container with a biohazard symbol.*

FDA Label Image

Figure (Enbrel 09)

An illustration diagram showing a human figure with labeled injection sites for ENBREL, including the upper arm, stomach area (abdomen), and thigh. The diagram highlights these areas in gray on the front of the body.*

FDA Label Image

Figure (Enbrel 10)

An instructional diagram showing hands preparing an ENBREL (etanercept) injection pen by removing a cap from the needle, accompanied by a clock illustration indicating a 5-minute wait time.*

FDA Label Image

Figure (Enbrel 11)

An instructional illustration showing two fingers pressing on the skin with arrows indicating a side-to-side motion. This diagram likely depicts a technique for administering or preparing to administer a subcutaneous injection, related to ENBREL products.*

FDA Label Image

Figure (Enbrel 12)

ENBREL 25 mg/0.5 mL is shown as a black, oval-shaped tablet with the imprint 'OR' on one side. The medication is labeled under Immunex Corporation.*

FDA Label Image

Figure (Enbrel 13)

Illustration showing finger pinching technique on the skin, likely for subcutaneous injection. Two fingers are pinching the skin with arrows indicating the direction of the pinch, demonstrating a step in administering a medication such as ENBREL.*

FDA Label Image

Figure (Enbrel 14)

An instructional diagram showing proper injection technique for ENBREL, with the injection device held at a 90-degree angle to the skin. A close-up inset highlights the green safety guard indicating the needle is inside the device. The illustration demonstrates how to position the injection pen against the injection site before administering the dose.*

FDA Label Image

Figure (Enbrel 15)

An instructional illustration showing a hand holding and pressing an ENBREL autoinjector pen vertically down onto the injection site on the skin of a leg, with an arrow indicating the downward pressing motion for administration.*

FDA Label Image

Figure (Enbrel 16)

Illustration showing a hand injecting an ENBREL prefilled syringe into the skin. The image highlights the syringe held upright, with an arrow indicating downward movement and a 'click' sound to denote proper injection technique for the 25 mg/.5 mL or 50 mg/mL dosage forms.*

FDA Label Image

Figure (Enbrel 17)

An instructional illustration showing a hand holding a prefilled syringe with a blue cap, positioned for subcutaneous injection into the skin. The syringe is being pressed downwards, with a finger stabilizing the injection site. A text callout "click" indicates an audible or tactile feedback during use.*

FDA Label Image

Figure (Enbrel 18)

An instructional diagram showing a device with a small window containing a yellow indicator, accompanied by a clock icon indicating a 15-second countdown. The image appears to demonstrate a step or timing in the use of the ENBREL autoinjector or similar delivery device.*

FDA Label Image

Figure (Enbrel 19)

ENBREL 25 mg/0.5 mL prefilled syringe packaging by Immunex Corporation. The image shows a teal and white carton viewed from the top, indicating a prefilled syringe unit dose packaging.*

FDA Label Image

Figure (Enbrel 20)

An instructional diagram showing the tip of a device with a yellow window. The window is fully yellow, likely indicating a status or condition related to the device's use or function. There is a label pointing to the window with the text 'Window is fully yellow.'*

FDA Label Image

Figure (Enbrel 21)

Illustration showing a beige adhesive bandage with six ventilation holes on each side and three white cotton balls grouped together below the bandage. The image is instructional or decorative in nature, likely related to wound care or injection site treatment.*

FDA Label Image

Figure (Enbrel 21a)

An instructional illustration showing a needle cap removal from a pen injection device, with an arrow indicating the direction to remove the cap before use. This relates to medication administration preparation.*

FDA Label Image

Image (Enbrel 22)

An illustration showing two views of an injection pen device, with arrows indicating specific features on the pen's barrel and dose window. This likely relates to administration or dose measurement for the Enbrel injection pen.*

FDA Label Image

Image (Enbrel 23)

An instructional anatomical diagram showing recommended injection sites for ENBREL. Highlighted areas include the abdomen (avoiding the navel), front and outer sides of the thighs, and outer upper arms on both the front and back views of the body.*

FDA Label Image

Image (Enbrel 24)

An instructional line drawing showing a person removing the cap from a syringe, demonstrating a step in preparing the ENBREL injection device for use.*

FDA Label Image

Image (Enbrel 25)

An illustration of a clock face with shaded area indicating the first 5 minutes, accompanied by the text "5 minutes". The image likely depicts a time-related instruction or duration indication.*

FDA Label Image

Image (Enbrel 26)

An instructional illustration showing a hand holding a syringe at a 45-degree angle to the skin surface, indicating the proper technique for subcutaneous injection. No specific drug information is visible in the image.*

FDA Label Image

Image (Enbrel 27)

FDA Label Image

Image (Enbrel 28)

An instructional diagram showing components of the ENBREL injection system, including an Enbrel vial, needle with twist-off cap, syringe with adapter, vial adapter, and plunger. The diagram labels each part to illustrate assembly or use steps.*

FDA Label Image

Image (Enbrel 29)

An instructional illustration showing a vial with a plastic cap and metal ring labeled, alongside a hand demonstrating the removal of the plastic cap from the vial. The image is associated with ENBREL, a product by Immunex Corporation, but does not display specific product labeling or strength information.*

FDA Label Image

Image (Enbrel 30)

An instructional line drawing showing two hands holding a syringe with a label indicating a 27-gauge needle. The image demonstrates how to handle or prepare the needle for injection.*

FDA Label Image

Image (Enbrel 31)

An instructional line drawing showing hands demonstrating the use of a vial adapter, detailing how to handle and attach it to a vial. The image focuses on the correct positioning and grip of the vial adapter device.*

FDA Label Image

Image (Enbrel 32)

An instructional illustration showing a hand holding a syringe with labeled parts: plunger, flange, gray stopper, and twist off cap. The image demonstrates how to hold and prepare the syringe, likely for use with the ENBREL product.*

FDA Label Image

Image (Enbrel 33)

An instructional illustration showing one hand holding a syringe while the other hand grips the syringe plunger, with a rotating arrow indicating that the plunger should be turned or twisted. It appears to demonstrate a step in preparing or using a syringe, possibly for the ENBREL drug injection.*

FDA Label Image

Image (Enbrel 34)

An instructional illustration showing hands turning the twist-off cap of a syringe counter-clockwise to remove it. The image demonstrates the first step in preparing the syringe for use.*

FDA Label Image

Image (Enbrel 35)

Illustration depicting hands turning a vial adapter clockwise onto a vial, likely demonstrating a step in medication preparation or administration for ENBREL.*

FDA Label Image

Image (Enbrel 36)

Illustration showing the steps to prepare a prefilled syringe, likely demonstrating how to attach or remove a needle cover from a syringe for injection. Two hands are visible handling the syringe and needle cover in a step-by-step manner.*

FDA Label Image

Image (Enbrel 37)

An instructional black-and-white line drawing showing two hands preparing an injection device. One hand holds a syringe while the other hand stabilizes the device's base, demonstrating the assembly or connection step for drug administration.*

FDA Label Image

Image (Enbrel 38)

An instructional illustration showing a hand holding a syringe and rotating the plunger or cap in a circular motion, likely indicating how to prepare the ENBREL injection before use.*

FDA Label Image

Image (Enbrel 39)

An instructional illustration showing two hands holding a syringe and a cap. One hand grips the syringe while the other hand pulls the cap off, with an arrow indicating the direction of removal. This image likely demonstrates how to prepare the ENBREL prefilled syringe for use.*

FDA Label Image

Image (Enbrel 40)

An instructional illustration showing a person removing the cap from a syringe while holding it with one hand, demonstrating part of the preparation process for ENBREL injection.*

FDA Label Image

Image (Enbrel 41)

An instructional illustration showing the preparation of an ENBREL injection. The image depicts hands holding a vial and a syringe, demonstrating the process of drawing the medication from the vial into the syringe for injection.*

FDA Label Image

Image (Enbrel 42)

An instructional diagram showing two hands preparing a syringe with a medication vial. One hand holds the vial inverted, while the other hand pulls back the plunger to draw liquid into the syringe. The image illustrates the proper technique for withdrawing medication from a vial using a syringe, relevant to ENBREL injectable product preparation.*

FDA Label Image

Image (Enbrel 43)

An instructional diagram showing how to remove the plastic cap and metal ring from a vial. The left side labels the plastic cap and metal ring on the vial's top. The right side depicts a hand gripping the vial, demonstrating the cap removal process.*

FDA Label Image

Image (Enbrel 44)

An instructional diagram showing a hand holding a syringe and a 25-gauge needle. The image highlights the needle and the proper holding technique, likely illustrating a step for preparation or administration of an injectable medication.*

FDA Label Image

Image (Enbrel 45)

An instructional diagram illustrating how to prepare ENBREL injection. The image shows a hand gripping the syringe plunger and another hand holding the syringe body, indicating the action to twist off the cap. Labels identify the plunger, flange, gray stopper, and cap on the syringe.*

FDA Label Image

Image (Enbrel 46)

An illustration showing hands holding a prefilled syringe, demonstrating the removal of the syringe cap by twisting it off. This image likely relates to preparation instructions for ENBREL, an injectable medication by Immunex Corporation.*

FDA Label Image

Image (Enbrel 47)

An instructional illustration showing how to remove a cap by turning it counter-clockwise using two hands. One hand holds the cap, the other holds a syringe-like object, demonstrating the twist-off process.*

FDA Label Image

Image (Enbrel 48)

An instructional illustration showing two hands preparing a syringe by inserting a needle into a vial or cartridge, with a circular arrow indicating a twisting or turning motion. This diagram likely demonstrates a step in the preparation or reconstitution process of an injectable medication.*

FDA Label Image

Image (Enbrel 49)

An instructional illustration showing a hand holding a syringe and removing a 27-gauge needle from the syringe. The diagram focuses on needle handling for preparation or disposal.*

FDA Label Image

Image (Enbrel 50)

An instructional illustration showing one hand pulling a cap straight off a syringe with the instruction text 'Pull Straight Off.' This diagram likely demonstrates how to safely remove the syringe cap before use.*

FDA Label Image

Image (Enbrel 51)

An instructional illustration showing a needle cover being removed from a syringe or injection device. The image highlights the step of pulling off the needle cover prior to use.*

FDA Label Image

Image (Enbrel 52)

An instructional illustration showing the correct and incorrect method of drawing medication from a vial using a syringe. The correct method identifies parts such as the metal ring, rubber stopper, open stopper window, syringe, needle, and vial, while the incorrect method is marked with an X.*

FDA Label Image

Image (Enbrel 53)

An instructional line drawing showing a person preparing a syringe by inserting the needle into a vial. One hand holds the vial steadily, while the other hand presses down on the syringe plunger, indicating the process of drawing medication from the vial. No product text or branding is visible.*

FDA Label Image

Image (Enbrel 54)

An instructional illustration showing a hand holding a syringe and rotating the plunger in a twisting motion, likely demonstrating how to prepare or mix the contents before injection.*

FDA Label Image

Image (Enbrel 55)

An instructional illustration showing a hand holding a syringe and pulling back the plunger, likely demonstrating how to draw medication or prepare the syringe for injection.*

FDA Label Image

Image (Enbrel 56)

Instructional illustration depicting a hand holding a syringe while the other hand is removing a cap from a vial. The image appears to demonstrate preparation or drawing medication from the vial into the syringe, relevant to the administration of ENBREL.*

FDA Label Image

16. Remove The Syringe And Needle From The Enbrel Vial. Keep The Needle Attached To The Syringe And Insert The 25 Gauge Needle Straight Down Into The Needle Cover In The Enbrel Dose Tray. (Enbrel 57)

An instructional illustration showing a hand holding a prefilled syringe with the needle cover being removed. The image emphasizes the needle cover removal step as part of the injection preparation process for ENBREL.*

FDA Label Image

Image (Enbrel 58)

An instructional diagram illustrating the preparation of a syringe. It shows two hands, one holding a syringe and the other inserting a needle or a cap, demonstrating a step in medication administration or preparation.*

FDA Label Image

Image (Enbrel 59)

An anatomical illustration showing front and back views of a human body with highlighted areas on the abdomen and thighs, indicating preferred injection sites for administration of a medication.*

FDA Label Image

Image (Enbrel 60)

An instructional illustration showing a person's hands removing a cap by pulling it straight off. The image highlights the motion with an arrow and includes the text 'Pull Straight Off' above the hands.*

FDA Label Image

Image (Enbrel 61)

Illustration showing an injection technique into the thigh using a prefilled syringe. The image depicts hands holding the syringe at a 45-degree angle to the skin, demonstrating proper administration of the medication ENBREL.*

FDA Label Image

Image (Enbrel 62)

An instructional illustration showing a hand positioning a syringe to inject medication into the thigh muscle of a seated person. The image demonstrates proper injection technique for administering a subcutaneous injection, relevant for products like ENBREL.*

FDA Label Image

Image (Enbrel 63)

FDA Label Image

Arrow Image (Enbrel 63a)

FDA Label Image

Image (Enbrel 64)

An illustration of an ENBREL injection device showing labeled parts including the finger grip, door button, expiration date, viewing window, door, injection end, status button, speaker, sound switch, error symbols, progress bar, and speed switch. The diagram visually explains the device's components for user guidance.*

FDA Label Image

Image (Enbrel 65)

ENBREL 25 mg/.5 mL single-dose vial packaging label from Immunex Corporation. The label includes product name, strength, dosage form as injectable solution, and manufacturer details. It is designed for professional use in administration of the drug.*

FDA Label Image

Image (Enbrel 66)

An illustration diagram showing parts of the ENBREL autoinjector pen, including the plunger, Enbrel Mini window, medicine area, expiration date, labeled side, needle (inside), and purple needle cap.*

FDA Label Image

Image (Enbrel 67)

ENBREL 25 mg/0.5 mL single-use prefilled syringe carton packaging. The label shows the proprietary name ENBREL, the strength 25 mg/0.5 mL, and identifies Immunex Corporation as the labeler. The carton design includes dosage form and quantity information.*

FDA Label Image

Image (Enbrel 68)

A circular timer illustration showing a 30-minute duration. The circle is divided into two halves, with the right half shaded in blue and the left half in white, indicating the passage of 30 minutes.*

FDA Label Image

Image (Enbrel 69)

Illustration of an injection pen device showing the location of the medicine inside the transparent window and an instruction note emphasizing not to remove the purple needle cap until step 11 in the usage procedure.*

FDA Label Image

Image (Enbrel 70)

An illustration showing the side view of an ENBREL prefilled syringe and a zoomed-in view highlighting the location of the expiration date (Exp.) and lot number (LOT) on the syringe label. The syringe contains 25 mg/.5mL or 50 mg/mL of the drug, labeled by Immunex Corporation.*

FDA Label Image

Image (Enbrel 71)

An instructional illustration showing a sharps disposal container with a lid open. Next to the container are depictions of three alcohol wipes, an adhesive bandage, and cotton balls or gauze pads, indicating items included or needed for injection site care.*

FDA Label Image

Image (Enbrel 72)

An illustration showing two hands engaged in washing, with visible soap bubbles around them. The image depicts a hand hygiene action, likely representing proper hand washing technique.*

FDA Label Image

Image (Enbrel 73)

An instructional illustration showing the proper technique for peeling back a protective film or label from a device or packaging. The image displays a close-up view highlighting the thumb and fingers lifting the film edge for removal.*

FDA Label Image

Image (Enbrel 74)

An instructional illustration showing a close-up of a hand holding and pressing a device, likely for administering ENBREL (etanercept). The illustration highlights a button being pressed on the side of the device, focusing on the thumb's position.*

FDA Label Image

Image (Enbrel 75)

An instructional illustration showing assembly steps for an ENBREL injection device, highlighting placement of the labeled side of the cartridge into the injector pen. The image uses arrows to indicate the direction of cartridge insertion into the pen's open compartment.*

FDA Label Image

Image (Enbrel 76)

An anatomical illustration showing recommended injection sites for ENBREL on the abdomen and front thighs of a human figure. Blue shaded areas highlight the precise locations suitable for injection administration.*

FDA Label Image

Image (Enbrel 76a)

Packaging label for ENBREL 50 mg/mL injection by Immunex Corporation. The product displays the proprietary name ENBREL with the active ingredient strength 50 mg per mL on the front of the carton. The label includes details indicating it is a single-dose vial for injection.*

FDA Label Image

Image (Enbrel 77)

An instructional illustration showing a hand holding and pressing down on a small rectangular adhesive patch or dressing, likely demonstrating its application to skin or a surface.*

FDA Label Image

Image (Enbrel 78)

An instructional diagram illustrating the removal process of a small purple cap from a device associated with ENBREL. The image shows a hand gripping the cap, positioned below a close-up of the device, with a blue downward-pointing arrow indicating the direction to pull the cap off.*

FDA Label Image

Image (Enbrel 79)

Illustration showing a hand holding an ENBREL auto-injector device, with the device's indicator lights visible and a musical note symbol suggesting an audio cue during use.*

FDA Label Image

Image (Enbrel 80)

ENBREL 50 mg/mL solution for injection vial label. The label displays the proprietary name ENBREL, the concentration 50 mg/mL, and usage information. The labeler is Immunex Corporation. The label is white with green text and design elements.*

FDA Label Image

Image (Enbrel 81)

An instructional illustration showing a hand holding an ENBREL autoinjector device with an emphasis on waiting during injection, which may take up to 20 seconds. The image includes a prompt to "Be patient" and highlights the device's indicator light at the top.*

FDA Label Image

Image (Enbrel 82)

Illustration showing a hand holding an ENBREL auto-injector device. The image depicts an upward arrow indicating the position of the device against the injection site on the skin, accompanied by a sound symbol. A small vertical bar on the device is also shown, likely indicating dose or injection status.*

FDA Label Image

Image (Enbrel 83)

Illustration showing a cartridge device with a window labeled 'No medicine in cartridge window.' The image focuses on the device's cartridge area to indicate the absence of medicine inside the cartridge window.*

FDA Label Image

Image (Enbrel 84)

An instructional illustration showing the process of inserting a medication vial or syringe into a red disposal container with a flip-top lid. The vial or syringe is depicted in mid-air with a blue arrow pointing downward toward the open container, indicating proper disposal method.*

FDA Label Image

Image (Enbrel 85)

An illustration shows a simple graphic of a rectangular adhesive bandage with a rectangular pad area and perforated sections on both sides, above three cotton balls clustered together.*

FDA Label Image

Image (Enbrel 86)

An instructional illustration showing the proper removal of the cap from an ENBREL prefilled syringe, focusing on hand positioning and cap detachment technique.*

FDA Label Image

Image (Enbrel 87)

Illustration of a pen injector device showing the top red activation button and a display panel with various warning and status symbols. The device design is slim and elongated, with a plus and minus control near the bottom and a small slot beneath the display, likely for dosing control or activation.*

FDA Label Image

Image (Enbrel 88)

FDA Label Image

Image (Enbrel 89)

FDA Label Image

Image (Enbrel 90)

FDA Label Image

Image (Enbrel 91)

FDA Label Image

Image (Enbrel 92)

FDA Label Image

Image (Enbrel 93)

FDA Label Image

Image (Enbrel 94)

An instructional illustration showing two devices: one tall, white autoinjector or pen-style device and one small, blue vial or syringe with a cap. The image appears to demonstrate the components or usage of injectable medication administration tools.*

FDA Label Image

Arrow Image (Enbrel 94a)

FDA Label Image

Image (Enbrel 95)

An illustration of a medical pen injector device, likely used for administering medication such as ENBREL. The device features a window display and a button on the side, designed for user operation during injection.*

FDA Label Image

Image (Enbrel 96)

ENBREL 50 mg/mL solution for injection in a single-dose prefilled syringe, labeled for subcutaneous use. The packaging includes the Immunex Corporation labeling with dosage strength clearly indicated on the vial and the box. The product is intended for use with a single-use syringe.*

FDA Label Image

Image (Enbrel 97)

An illustration of an ENBREL autoinjector pen with dosage markings on the side, showing a 1 mL measurement scale. The device has a purple cap and a light blue body with a rectangular window likely for viewing the medication inside.*

FDA Label Image

Image (Enbrel 98)

FDA Label Image

Image (Enbrel 99)

ENBREL 50 mg/mL single-use prefilled syringe packaging label. The label features the ENBREL brand name prominently, with strength and dosage form indicated. Provided by Immunex Corporation, the label includes usage and storage information along the edges and a QR code for digital information access.*

FDA Label Image

Image (Enbrel 100)

An illustration showing two components of the ENBREL drug delivery system. On the left is a white and gray electronic injector device with a display panel and control buttons. On the right is a smaller, blue pre-filled autoinjector pen labeled ENBREL, featuring a purple plunger button.*

FDA Label Image

Image (Enbrel 101)

An anatomical illustration highlighting injection sites for ENBREL, showing the upper arm, stomach area (abdomen), and thigh as locations for subcutaneous administration.*

FDA Label Image

Image (Enbrel 102)

An instructional illustration showing use of a prefilled syringe labeled on one side. The steps demonstrate removing a cap from the syringe, attaching a needle, and preparing the syringe for injection.*

FDA Label Image

Image (Enbrel 102a)

Instructional diagram illustrating the use of an ENBREL autoinjector pen, showing a hand holding the pen and removing the purple cap by pulling it downward to prepare for injection.*

FDA Label Image

Image (Enbrel 103)

An instructional illustration showing a hand holding a device against a thumb. The device has a green indicator on top, and a speech bubble with a starburst shape is depicted next to the thumb, indicating a feedback or alert from the device.*

FDA Label Image

Image (Enbrel 104)

An instructional diagram showing a person's thumb pressing a device's status button, which is flashing green. The image includes a caption reading 'Status button flashes,' indicating an operational or readiness status of the device.*

FDA Label Image

Image (Enbrel 105)

An instructional diagram showing three labeled illustrations: a close-up of the ENBREL autoinjector's window with a visible indicator, a musical note icon indicating an auditory signal, and a top view of the autoinjector needle cover, likely explaining usage or activation steps.*

FDA Label Image

Image (Enbrel 106)

An instructional diagram of a device labeled with parts including finger grip, door button, viewing window, and door. The illustration shows key components of the device, which is likely related to administration or delivery of ENBREL injectable medication by Immunex Corporation.*

FDA Label Image

Image (Enbrel 107)

An illustration showing a hand gripping a device, likely demonstrating how to hold the device properly. The image does not contain text or product details but appears instructional in nature.*

FDA Label Image

Image (Enbrel 108)

An illustration of a device labeled with components including a status button at the top, a speaker below it, error symbols, a progress bar indicated in the middle, and a speed switch near the bottom. The device shape suggests use as an injection or delivery tool related to ENBREL products.*

FDA Label Image

Image (Enbrel 109)

An instructional diagram illustrating the ENBREL injection device from Immunex Corporation. The side view highlights the location of the sound switch and the injection end of the device, intended to assist users in understanding key functional parts of the auto-injector pen.*

FDA Label Image

Image (Enbrel 110)

An instructional diagram labeled 'Before use' showing the Enbrel Mini device. The labeled side, expiration date, medicine label, and a window showing the medicine inside are identified. A purple cap on the device is also highlighted. The image demonstrates key external features of the Enbrel Mini injector before administration.*

FDA Label Image

Image (Enbrel 111)

Illustration diagram showing the Enbrel Mini injection device after use. The diagram highlights the mini window panel indicating it is without medicine, with a note that the needle is inside the Enbrel Mini. Below is a detailed image of the purple cap in the off position.*

FDA Label Image

Image (Enbrel 112)

An instructional diagram of the ENBREL Mini single-dose prefilled cartridge injection device by Immunex Corporation. It highlights the location of the plunger rod and the loaded Enbrel Mini cartridge inside the device, visually demonstrating key components of the auto-injector pen.*

FDA Label Image

Image (Enbrel 113)

An instructional diagram showing a white medical injector device, likely related to ENBREL. The image highlights a control panel with symbols including a sun, snowflake, syringe, and a warning triangle, alongside a red button at the device top emitting red lines and a sound icon, likely illustrating operational or safety indicators.*

FDA Label Image

Image (Enbrel 114)

FDA Label Image

Image (Enbrel 115)

FDA Label Image

Image (Enbrel 116)

FDA Label Image

Image (Enbrel 117)

FDA Label Image

Image (Enbrel 118)

FDA Label Image

Image (Enbrel 119)

FDA Label Image

Image (Enbrel 120)

An instructional illustration showing how to insert an ENBREL prefilled syringe into a device. It highlights the labeled side of the syringe being aligned and pushed downward into the door of the device, demonstrating proper positioning before use.*

FDA Label Image

Image (Enbrel 121)

FDA Label Image

Image (Enbrel 122)

FDA Label Image

Image (Enbrel 123)

A black and white illustration showing a rectangular box with the text "LOT" centered inside, indicating a lot or batch number designation for a drug product label.*

FDA Label Image

Image (Enbrel 124)

FDA Label Image

Image (Enbrel 125)

FDA Label Image

Image (Enbrel 126)

FDA Label Image

Image (Enbrel 127)

FDA Label Image

Image (Enbrel 128)

An instructional illustration depicting proper injection technique. It shows a person preparing and administering a subcutaneous injection using a syringe or autoinjector device, emphasizing steps for cleaning the injection site and handling the device safely. The style is simple and designed for patient use with ENBREL.*

FDA Label Image

Image (Enbrel 129)

FDA Label Image

Image (Enbrel 130)

FDA Label Image

Image (Enbrel 130b)

FDA Label Image

Image (Enbrel 131)

Illustration showing two device forms of ENBREL by Immunex Corporation: a larger, handheld electronic injector and a smaller, pen-style injector, used for delivering the medication subcutaneously. The image highlights differences in design and size between the two devices.*

FDA Label Image

Image (Enbrel 132)

An instructional diagram showing injection sites on a human body for ENBREL. The labeled areas for injection include the upper arm, stomach area (abdomen), and thigh.*

FDA Label Image

Image (Enbrel 133)

An instructional illustration showing a hand holding an ENBREL auto-injector pen with the labeled side visible, positioned above its storage slot or packaging tray.*

FDA Label Image

Image (Enbrel 134)

An instructional diagram showing two steps of handling an autoinjector pen for ENBREL. The left side depicts a person holding the autoinjector with one hand and a cap with the other. The right side shows a hand pushing down a purple cap, indicated by a black arrow, with the autoinjector positioned above and a yellow light beam shown from the device.*

FDA Label Image

Image (Enbrel 135)

An instructional illustration showing a hand holding a white cylindrical device with a green button on top and the thumb pressing the button. Sound waves depicted next to the thumb indicate a click or activation sound.*

FDA Label Image

Image (Enbrel 136)

An instructional diagram showing a hand holding the top of an ENBREL autoinjector pen. The image highlights the status button on the pen, which is shown flashing with green light, indicating device activation status.*

FDA Label Image

Image (Enbrel 137)

An instructional illustration showing a close-up view of the top of a device or container with a notable button or feature centered. The image includes a musical note symbol, possibly indicating a sound or alert function related to the device's use or operation.*

FDA Label Image

Image (Enbrel 138)

An instructional diagram showing a side view of an ENBREL injection device. Labeled parts include the finger grip, door button, viewing window, and door, illustrating components involved in device operation or use.*

FDA Label Image

Image (Enbrel 139)

An instructional illustration showing a hand gripping the upper part of a device, which appears to be the ENBREL autoinjector. The image demonstrates how to hold or operate the autoinjector, with focus on finger placement around the device handle.*

FDA Label Image

Image (Enbrel 140)

An instructional illustration of a device labeled with parts including a Status button at the top, a Speaker below it, Error symbols in the middle, a green Progress bar beneath the error symbols, and a Speed switch at the bottom. The image shows the layout and labeling of these components on the device's front face.*

FDA Label Image

Image (Enbrel 141)

An instructional illustration of an ENBREL autoinjector device featuring labels indicating the 'Sound switch' control and the 'Injection end' of the device, highlighting key functional parts for use.*

FDA Label Image

Image (Enbrel 142)

An instructional illustration showing parts of an Enbrel Mini injector pen. Labeled features include the labeled side, expiration date, medicine visible through the Enbrel Mini window, and a purple cap on the bottom of the pen device.*

FDA Label Image

Image (Enbrel 143)

An instructional illustration of the ENBREL Mini, showing the PEN device without medicine inside and highlighting the location of the needle inside the device. The image also points to the removable purple cap, emphasizing its position relative to the pen. No dosage or strength details are displayed.*

FDA Label Image

Image (Enbrel 144)

An illustration showing the Enbrel Mini single-dose prefilled cartridge injector device. The image highlights the plunger rod and the loaded cartridge section of the device.*

FDA Label Image

Image (Enbrel 145)

Illustration of a medication delivery device for ENBREL, highlighting the control panel with indicators for battery life, temperature conditions, and a warning symbol. The device shows a red light on top and emits a sound, indicating operation status or an alert.*

FDA Label Image

Image (Enbrel 146)

FDA Label Image

Image (Enbrel 147)

FDA Label Image

Image (Enbrel 148)

FDA Label Image

Image (Enbrel 149)

FDA Label Image

Image (Enbrel 150)

FDA Label Image

Image (Enbrel 151)

FDA Label Image

Image (Enbrel 152)

Illustration showing the proper insertion of an ENBREL prefilled syringe (25 mg/.5 mL or 50 mg/mL) into the device holder. One hand holds the syringe by its labeled side, aligning it to be inserted downward into the device's open door held by the other hand.*

FDA Label Image

Image (Enbrel 153)

FDA Label Image

Image (Enbrel 154)

FDA Label Image

Image (Enbrel 155)

FDA Label Image

Image (Enbrel 156)

The image shows a black rectangular label with the bold, capitalized word "LOT" printed inside. No other product identifiers, strengths, or manufacturer details are visible in this image.*

FDA Label Image

Image (Enbrel 157)

FDA Label Image

Image (Enbrel 158)

FDA Label Image

Image (Enbrel 159)

FDA Label Image

Image (Enbrel 160)

FDA Label Image

Image (Enbrel 161)

FDA Label Image

Image (Enbrel 162)

FDA Label Image

Image (Enbrel 163)

FDA Label Image

Image (Enbrel 164)

FDA Label Image

Image (Enbrel 165)

FDA Label Image

Image (Enbrel 166)

ENBREL 25 mg/0.5 mL prefilled pen label from Immunex Corporation. The label shows a portion of the product packaging with the brand name ENBREL, dosage strength of 25 mg per 0.5 mL, and the form as a prefilled pen for injection.*

FDA Label Image

Image (Enbrel 167)

An instructional diagram illustrating the insertion of an ENBREL cartridge into an autoinjector device. The labeled side of the cartridge is indicated, and an arrow shows the cartridge being placed into the open autoinjector, which has a curved handle and viewing window.*

FDA Label Image

Image (Enbrel 168)

FDA Label Image

Image (Enbrel 169)

FDA Label Image

Image (Enbrel 170)

A black and white image showing a rectangular box with the bold letters "LOT" centered inside the box. This appears to be a lot number label or identifier.*

FDA Label Image

Image (Enbrel 171)

FDA Label Image

Image (Enbrel 172)

FDA Label Image

Image (Enbrel 173)

FDA Label Image

Image (Enbrel 174)

FDA Label Image

Image (Enbrel 175)

FDA Label Image

Image (Enbrel 176)

FDA Label Image

Image (Enbrel 177)

FDA Label Image

Image (Enbrel 178)

ENBREL 25 mg/0.5 mL prefilled syringe packaging label. The label shows Enbrel as the proprietary name and includes the strength of 25 mg per 0.5 mL. The product is manufactured by Immunex Corporation. The packaging appears designed for single-use prefilled syringes.*

FDA Label Image

Image (Enbrel 179)

FDA Label Image

Image (Enbrel 180)

FDA Label Image

Image (Enbrel 181)

FDA Label Image

Image (Enbrel 182)

The image shows a vial with a blue cap and a transparent body, typically used for injectable medications. The label does not display any text or detailed markings visible in the image. This vial could contain a liquid pharmaceutical product such as ENBREL, available in strengths like 25 mg/0.5 mL or 50 mg/mL, produced by Immunex Corporation.*

FDA Label Image

Image (Enbrel 183)

Image showing two glass vials of ENBREL by Immunex Corporation. The vial on the left is labeled 25 mg/0.5 mL and the vial on the right is labeled 50 mg/mL. Both vials have blue caps and contain clear liquid.*

FDA Label Image

Image (Enbrel 184)

An instructional diagram showing hands holding a vial labeled with an expiration date, next to a clock icon indicating 30 minutes. This likely illustrates a preparation or waiting step involving the vial for proper medication use.*

FDA Label Image

Image (Enbrel 185)

An instructional diagram showing medical disposal and injection supplies including a syringe, alcohol wipes, cotton balls, a bandage, a sharps disposal container, and short and long needles labeled respectively.*

FDA Label Image

Image (Enbrel 186)

An instructional illustration showing a hand removing a paper seal from a vial labeled with a green vial cap and a gray stopper. This diagram demonstrates the initial step to access the vial contents.*

FDA Label Image

Image (Enbrel 187)

An instructional diagram showing the use of syringes with two types of needles labeled: Long needle and Short needle. The illustration depicts a hand holding a syringe and removing a needle cap, with a zoomed inset showing detailed views of a long needle and a short needle for ENBREL injection.*

FDA Label Image

Image (Enbrel 188)

An instructional illustration showing hands holding a syringe and a small vial, with the syringe needle being inserted into the vial. The image also shows a needle cap on the surface nearby, demonstrating preparation for drawing medication from the vial.*

FDA Label Image

Image (Enbrel 189)

An instructional illustration showing a hand drawing liquid into a syringe from a small vial. A close-up inset highlights the vial with liquid inside, and the syringe needle inserted into the vial's rubber stopper. This diagram likely demonstrates the preparation or withdrawal of a dose for injection.*

FDA Label Image

Image (Enbrel 190)

An instructional illustration showing a syringe being prepared with liquid inside. The image highlights the syringe's contents with a close-up inset, and depicts a hand holding the syringe while pressing the plunger, indicating the process of drawing or expelling the medication.*

FDA Label Image

Image (Enbrel 191)

An instructional diagram showing how to hold and operate a syringe for injection. The image highlights the syringe with a close-up inset focusing on the measurement markings and liquid inside the barrel, emphasizing correct handling prior to administration.*

FDA Label Image

Image (Enbrel 192)

An instructional illustration showing a vial being accessed with a syringe. The main image depicts a hand holding a syringe being inserted into the vial to withdraw medication. A zoomed inset highlights the vial with a capped top. The illustration is likely for preparation or administration instructions related to ENBREL.*

FDA Label Image

Image (Enbrel 193)

An instructional illustration showing two syringes labeled 'Before' and 'After.' Both syringes contain liquid marked with measurement increments, with the 'Before' syringe showing more liquid than the 'After' syringe, indicating a change in volume.*

FDA Label Image

Image (Enbrel 194)

An instructional illustration showing a hand removing a protective cap from a syringe labeled for ENBREL. The image uses arrows to indicate the direction of cap removal and proper handling of the syringe prior to use.*

FDA Label Image

Image (Enbrel 195)

An instructional diagram showing two steps involving a syringe and needle. The first step illustrates removing the long needle from the syringe. The second step shows attaching a short needle to the syringe. The hands and needles are depicted in blue outline, with arrows indicating the motion.*

FDA Label Image

Image (Enbrel 196)

An instructional diagram illustrating recommended injection sites on the human body. It highlights areas including the abdomen, front and outer thighs, and the upper arms, shown from front and back views. The illustration uses blue shading to indicate specific injection locations.*

FDA Label Image

Image (Enbrel 197)

An instructional illustration showing hands holding a syringe at a 45-degree angle with a finger pressing a plunger, likely demonstrating an injection technique related to ENBREL by Immunex Corporation.*

FDA Label Image

Image (Enbrel 198)

An instructional illustration showing a syringe and vial with an arrow pointing to a waste bin. The accompanying text advises to always throw away used vials. This graphic is likely part of medication handling or disposal instructions for ENBREL.*

FDA Label Image

Image (Enbrel 199)

ENBREL 25 mg/0.5 mL single-use glass syringe carton from Immunex Corporation. The front panel includes the proprietary name ENBREL and strength prominently displayed. The carton features text and barcodes related to the product and manufacturer, with a white and orange color scheme.*

FDA Label Image

Bar Code (Enbrel 198a)

FDA Label Image

Image (Enbrel 199a)

An illustrated labeled diagram of an ENBREL prefilled syringe showing various parts. Labels indicate the purple start button, expiration date window, medicine window, dark green safety guard covering the needle, and white needle cap. The syringe is designed for the administration of ENBREL medication by Immunex Corporation.*

FDA Label Image

Image (Enbrel 199b)

Illustration of a timer indicating a 30-minute wait period, with half the clock face shaded blue and labeled 'WAIT 30 minutes.' This diagram visually represents a waiting time interval.*

FDA Label Image

Image (Enbrel 199c)

An anatomical diagram showing recommended injection sites on the human body for ENBREL. The diagram highlights the stomach and thigh areas as injection locations.*

FDA Label Image

Image (Enbrel 199d)

Instructional illustration showing a hand holding an ENBREL prefilled syringe and a cap being removed, with a note indicating the syringe window should be visible. The image demonstrates proper preparation for injection using ENBREL by Immunex Corporation.*

FDA Label Image

Image (Enbrel 199e)

ENBREL 25 mg/0.5 mL single-dose prefilled syringe packaging label by Immunex Corporation. The label includes the product name, strength, dosage form, manufacturer information, and a visual of the syringe with markings.*

FDA Label Image

Image (Enbrel 199f)

An instructional illustration showing two hand techniques to prepare for an injection with ENBREL. The top image demonstrates stretching the skin around the injection site, while the bottom image shows pinching the skin. Both methods involve holding the syringe vertically.*

FDA Label Image

Image (Enbrel 199g)

An instructional illustration showing a close-up of a hand holding a device with a blue arrow pointing downward, indicating the need to press or push down the device. The image is part of a step-by-step guide, likely related to administration or usage of ENBREL injection.*

FDA Label Image

Image (Enbrel 200)

An instructional illustration showing a hand holding a small cylindrical object, with a downward arrow indicating a pressing or pushing action on the top of the object. The image appears to be part of usage instructions for a medical device or pen, likely related to ENBREL packaging or administration.*

FDA Label Image

Image (Enbrel 201)

An instructional illustration showing how to use an ENBREL device. It depicts a hand pressing down on the device, followed by a close-up of the device’s indicator window transitioning from partially filled white and yellow to fully yellow, likely indicating proper use or activation of the injection.*

FDA Label Image

Principal Display Panel (25 mg/0.5 mL Syringe Carton)

ENBREL 25 mg/0.5 mL single-dose prefilled syringe carton label showing the brand name Enbrel with the active ingredient etanercept. The label specifies it contains 4 single-dose prefilled syringes, intended for subcutaneous use only, without preservative, and refrigerated storage instructions. Manufactured by Immunex Corporation.*

FDA Label Image

Principal Display Panel (50 mg/mL Syringe Carton)

ENBREL 50 mg/mL single-dose prefilled syringe packaging label by Immunex Corporation. The label specifies 4 single-dose prefilled syringes per carton and highlights that the product is not made with natural rubber latex. It notes storage instructions to refrigerate at 2° to 8°C and warnings against freezing. The label is blue and gray with the brand name Enbrel prominently displayed along with the active ingredient etanercept.*

FDA Label Image

Principal Display Panel (50 mg/mL Autoinjector Carton)

ENBREL 50 mg/mL single-dose prefilled autoinjector carton label showing one autoinjector device. The label includes notice that the product is for subcutaneous use only, sterile with no preservative, and refrigeration instructions. The labeler is Immunex Corporation, and the package contains four single-dose prefilled autoinjectors. Warnings about pediatric use and reuse are visible along with a QR code and website ENBRELinjection.com.*

FDA Label Image

Principal Display Panel (50 mg/mL Autoinjector Carton)

Label of ENBREL 50 mg/mL single-dose prefilled autoinjector by Immunex Corporation. The label features the dosage strength in a blue triangle and an image of the autoinjector pen device. It includes storage instructions to refrigerate at 36°F to 46°F and warnings against freezing, reuse, and pediatric use under 63 kg. The label states the product is a sterile, preservative-free solution for subcutaneous use only.*

FDA Label Image

Principal Display Panel Contains 4 Multi-dose Trays Ndc 58406-425-34 Amgen® Enbrel® Etanercept 25 mg/vial Multiple-dose Vial See Package Insert For Full Prescribing Information And Instructions For Preparation And Administration. 25 mg/vial Each Vial Contains A Sterile Lyophilized Preparation Of 25 mg Etanercept (a Recombinant Cho Cell-derived Product), 40 mg Mannitol, 10 mg Sucrose, And 1.2 mg Tromethamine. Specific Activitiy: Approximately 1.7 X 106 U/mg. No U.s. Standard Of Potency. Volume After Reconstitution With 1 mL Diluent Is 1 mL. Before And After Reconstitution Refrigerate At 2° To 8°c (36° To 46°f). Do Not Freeze. For Subcutaneous Use Only Amgen® Manufactured By Immunex Corporation, Thousand Oaks, Ca 91320 Contains Diluent Syringes (made In Germany) U.s. License No. 1132 ©2013, 2016 Immunex Corporation Patent: Http://pat.amgen.com/enbrel/ (Enbrel 205)

ENBREL 25 mg/vial multiple-dose vial label by Immunex Corporation, displaying the brand name, active ingredient etanercept, and strength of 25 mg per vial. The label includes storage instructions to refrigerate between 2° to 8°C (36° to 46°F) and not to freeze. The package contains 4 multi-dose trays. Additional details note the vial is for subcutaneous use only and list specific product composition and manufacturing information.*

FDA Label Image

Principal Display Panel (50 mg/mL Cartridge Carton)

ENBREL Mini prefilled cartridge 50 mg/mL by Immunex Corporation. The label shows that the package contains 4 single-dose prefilled cartridges, intended for use with AutoTouch reusable autoinjectors. It notes refrigeration requirements, single-use only, and that it is not made with natural rubber latex. Branding includes Enbrel and Amgen logos.*

FDA Label Image

Principal Display Panel (50 mg/mL Single-dose Prefilled Cartridge Autoinjector Label)

Packaging label for the AutoTouch Connect reusable autoinjector by Amgen, designed for use with Enbrel Mini (etanercept) single-dose prefilled cartridges. The label states it contains one reusable autoinjector for subcutaneous use only and includes storage instructions along with safety icons. The product is Rx only.*

FDA Label Image

Principal Display Panel (25 mg/0.5 mL Vial Carton)

Packaging label for ENBREL (etanercept) Injection 25 mg/0.5 mL single-dose vial, manufactured by Immunex Corporation. The label includes dosing information, storage instructions to refrigerate between 2° to 8°C and warnings not to freeze or shake, as well as patient support contact details for ENBREL SupportPlus. The product is for subcutaneous use and contains no preservatives.*

* About these descriptions: Image descriptions on this page are generated by automated AI analysis of the product label images from the manufacturer's FDA label submission (SPL). They are provided for reference only and may contain errors or omissions. Always rely on the printed label itself and the official FDA labeling, and consult a pharmacist or healthcare professional with any questions about this product.